diff mbox series

[v4,5/7] misc: Add versal-usb2-regs module

Message ID 1598642380-27817-6-git-send-email-sai.pavan.boddu@xilinx.com
State New
Headers show
Series None | expand

Commit Message

Sai Pavan Boddu Aug. 28, 2020, 7:19 p.m. UTC
This is a dummy module to emulate control registers of versal usb2
controller.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
---
 hw/misc/Makefile.objs                   |   1 +
 hw/misc/xlnx-versal-usb2-regs.c         | 224 ++++++++++++++++++++++++++++++++
 include/hw/misc/xlnx-versal-usb2-regs.h |  43 ++++++
 3 files changed, 268 insertions(+)
 create mode 100644 hw/misc/xlnx-versal-usb2-regs.c
 create mode 100644 include/hw/misc/xlnx-versal-usb2-regs.h

Comments

Sai Pavan Boddu Sept. 1, 2020, 7:36 a.m. UTC | #1
Hi Gred,

> -----Original Message-----
> From: Gerd Hoffmann <kraxel@redhat.com>
> Sent: Monday, August 31, 2020 12:33 PM
> To: Sai Pavan Boddu <saipava@xilinx.com>
> Cc: Peter Maydell <peter.maydell@linaro.org>; Markus Armbruster
> <armbru@redhat.com>; 'Marc-André Lureau'
> <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;
> Edgar Iglesias <edgari@xilinx.com>; Francisco Eduardo Iglesias
> <figlesia@xilinx.com>; qemu-devel@nongnu.org; Alistair Francis
> <alistair.francis@wdc.com>; Eduardo Habkost <ehabkost@redhat.com>;
> Ying Fang <fangying1@huawei.com>; 'Philippe Mathieu-Daudé'
> <philmd@redhat.com>; Vikram Garhwal <fnuv@xilinx.com>; Paul
> Zimmerman <pauldzim@gmail.com>
> Subject: Re: [PATCH v4 5/7] misc: Add versal-usb2-regs module
> 
> On Sat, Aug 29, 2020 at 12:49:38AM +0530, Sai Pavan Boddu wrote:
> > This is a dummy module to emulate control registers of versal usb2
> > controller.
> 
> --verbose please.  xhci supports all usb speeds, including usb2.
[Sai Pavan Boddu] This module is has soc specific control/status register to control the phy-reset, adjust frame length time  and coherency properties for the transactions.

> 
> So why this hardware is here, what does it on a real device and what is the
> emulation doing?  "dummy" sounds like it does just enough to make the
> guest driver happy, probably pretending nothing is connected?
Yes, this is added to make guest happy.

I will the commit message with more info

Regards,
Sai Pavan
> 
> thanks,
>   Gerd
diff mbox series

Patch

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 6be3d25..6d12ca7 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -64,6 +64,7 @@  common-obj-$(CONFIG_RASPI) += bcm2835_thermal.o
 common-obj-$(CONFIG_SLAVIO) += slavio_misc.o
 common-obj-$(CONFIG_ZYNQ) += zynq_slcr.o
 common-obj-$(CONFIG_ZYNQ) += zynq-xadc.o
+common-obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal-usb2-regs.o
 common-obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o
 common-obj-$(CONFIG_STM32F4XX_SYSCFG) += stm32f4xx_syscfg.o
 common-obj-$(CONFIG_STM32F4XX_EXTI) += stm32f4xx_exti.o
diff --git a/hw/misc/xlnx-versal-usb2-regs.c b/hw/misc/xlnx-versal-usb2-regs.c
new file mode 100644
index 0000000..244cda2
--- /dev/null
+++ b/hw/misc/xlnx-versal-usb2-regs.c
@@ -0,0 +1,224 @@ 
+/*
+ * QEMU model of the XlnxUsb2Regs Register control block/Status for USB2.0 IP
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Autogenerated by xregqemu.py 2020-04-08.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "migration/vmstate.h"
+#include "hw/misc/xlnx-versal-usb2-regs.h"
+
+#ifndef XILINX_USB2_REGS_ERR_DEBUG
+#define XILINX_USB2_REGS_ERR_DEBUG 0
+#endif
+
+#define TYPE_XILINX_USB2_REGS "xlnx.usb2_regs"
+
+#define XILINX_USB2_REGS(obj) \
+     OBJECT_CHECK(XlnxUsb2Regs, (obj), TYPE_XILINX_USB2_REGS)
+
+REG32(BUS_FILTER, 0x30)
+    FIELD(BUS_FILTER, BYPASS, 0, 4)
+REG32(PORT, 0x34)
+    FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
+    FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
+    FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
+    FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
+    FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
+REG32(JITTER_ADJUST, 0x38)
+    FIELD(JITTER_ADJUST, FLADJ, 0, 6)
+REG32(BIGENDIAN, 0x40)
+    FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
+REG32(COHERENCY, 0x44)
+    FIELD(COHERENCY, USB_COHERENCY, 0, 1)
+REG32(XHC_BME, 0x48)
+    FIELD(XHC_BME, XHC_BME, 0, 1)
+REG32(REG_CTRL, 0x60)
+    FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
+REG32(IR_STATUS, 0x64)
+    FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
+REG32(IR_MASK, 0x68)
+    FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
+REG32(IR_ENABLE, 0x6c)
+    FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
+REG32(IR_DISABLE, 0x70)
+    FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
+REG32(USB3, 0x78)
+
+static void ir_update_irq(XlnxUsb2Regs *s)
+{
+    bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
+    qemu_set_irq(s->irq_ir, pending);
+}
+
+static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxUsb2Regs *s = XILINX_USB2_REGS(reg->opaque);
+    /*
+     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
+     * May be combine both the modules.
+     */
+    ir_update_irq(s);
+}
+
+static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxUsb2Regs *s = XILINX_USB2_REGS(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] &= ~val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    XlnxUsb2Regs *s = XILINX_USB2_REGS(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] |= val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static const RegisterAccessInfo usb2_regs_regs_info[] = {
+    {   .name = "BUS_FILTER",  .addr = A_BUS_FILTER,
+        .rsvd = 0xfffffff0,
+    },{ .name = "PORT",  .addr = A_PORT,
+        .rsvd = 0xffffffe0,
+    },{ .name = "JITTER_ADJUST",  .addr = A_JITTER_ADJUST,
+        .reset = 0x20,
+        .rsvd = 0xffffffc0,
+    },{ .name = "BIGENDIAN",  .addr = A_BIGENDIAN,
+        .rsvd = 0xfffffffe,
+    },{ .name = "COHERENCY",  .addr = A_COHERENCY,
+        .rsvd = 0xfffffffe,
+    },{ .name = "XHC_BME",  .addr = A_XHC_BME,
+        .reset = 0x1,
+        .rsvd = 0xfffffffe,
+    },{ .name = "REG_CTRL",  .addr = A_REG_CTRL,
+        .rsvd = 0xfffffffe,
+    },{ .name = "IR_STATUS",  .addr = A_IR_STATUS,
+        .rsvd = 0xfffffffc,
+        .w1c = 0x3,
+        .post_write = ir_status_postw,
+    },{ .name = "IR_MASK",  .addr = A_IR_MASK,
+        .reset = 0x3,
+        .rsvd = 0xfffffffc,
+        .ro = 0x3,
+    },{ .name = "IR_ENABLE",  .addr = A_IR_ENABLE,
+        .rsvd = 0xfffffffc,
+        .pre_write = ir_enable_prew,
+    },{ .name = "IR_DISABLE",  .addr = A_IR_DISABLE,
+        .rsvd = 0xfffffffc,
+        .pre_write = ir_disable_prew,
+    },{ .name = "USB3",  .addr = A_USB3,
+    }
+};
+
+static void usb2_regs_reset(DeviceState *dev)
+{
+    XlnxUsb2Regs *s = XILINX_USB2_REGS(dev);
+    unsigned int i;
+
+    for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+        register_reset(&s->regs_info[i]);
+    }
+
+    ir_update_irq(s);
+}
+
+static const MemoryRegionOps usb2_regs_ops = {
+    .read = register_read_memory,
+    .write = register_write_memory,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void usb2_regs_init(Object *obj)
+{
+    XlnxUsb2Regs *s = XILINX_USB2_REGS(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    RegisterInfoArray *reg_array;
+
+    memory_region_init(&s->iomem, obj, TYPE_XILINX_USB2_REGS,
+                       USB2_REGS_R_MAX * 4);
+    reg_array =
+        register_init_block32(DEVICE(obj), usb2_regs_regs_info,
+                              ARRAY_SIZE(usb2_regs_regs_info),
+                              s->regs_info, s->regs,
+                              &usb2_regs_ops,
+                              XILINX_USB2_REGS_ERR_DEBUG,
+                              USB2_REGS_R_MAX * 4);
+    memory_region_add_subregion(&s->iomem,
+                                0x0,
+                                &reg_array->mem);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq_ir);
+}
+
+static const VMStateDescription vmstate_usb2_regs = {
+    .name = TYPE_XILINX_USB2_REGS,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, XlnxUsb2Regs, USB2_REGS_R_MAX),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void usb2_regs_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = usb2_regs_reset;
+    dc->vmsd = &vmstate_usb2_regs;
+}
+
+static const TypeInfo usb2_regs_info = {
+    .name          = TYPE_XILINX_USB2_REGS,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(XlnxUsb2Regs),
+    .class_init    = usb2_regs_class_init,
+    .instance_init = usb2_regs_init,
+};
+
+static void usb2_regs_register_types(void)
+{
+    type_register_static(&usb2_regs_info);
+}
+
+type_init(usb2_regs_register_types)
diff --git a/include/hw/misc/xlnx-versal-usb2-regs.h b/include/hw/misc/xlnx-versal-usb2-regs.h
new file mode 100644
index 0000000..4c5dc02
--- /dev/null
+++ b/include/hw/misc/xlnx-versal-usb2-regs.h
@@ -0,0 +1,43 @@ 
+/*
+ * QEMU model of the XlnxUsb2Regs Register control block/Status for USB2.0 IP
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Autogenerated by xregqemu.py 2020-04-08.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _XLNX_USB2_REGS_H_
+#define _XLNX_USB2_REGS_H_
+
+#define USB2_REGS_R_MAX ((0x78 / 4) + 1)
+
+typedef struct XlnxUsb2Regs {
+    SysBusDevice parent_obj;
+    MemoryRegion iomem;
+    qemu_irq irq_ir;
+
+    uint32_t regs[USB2_REGS_R_MAX];
+    RegisterInfo regs_info[USB2_REGS_R_MAX];
+} XlnxUsb2Regs;
+
+#endif
+
+