diff mbox series

[v2,12/16] hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23

Message ID 1598714261-8320-13-git-send-email-bmeng.cn@gmail.com
State New
Headers show
Series hw/riscv: Add Microchip PolarFire SoC Icicle Kit board support | expand

Commit Message

Bin Meng Aug. 29, 2020, 3:17 p.m. UTC 
From: Bin Meng <bin.meng@windriver.com>

When cadence_gem model was created for Xilinx boards, the PHY address
was hard-coded to 23 in the GEM model. Now that we have introduced a
property we can use that to tell GEM model what our PHY address is.
Change all boards' GEM 'phy-addr' property value to 23, and set the
PHY address default value to 0 in the GEM model.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

(no changes since v1)

 hw/arm/xilinx_zynq.c | 1 +
 hw/arm/xlnx-versal.c | 1 +
 hw/arm/xlnx-zynqmp.c | 1 +
 hw/net/cadence_gem.c | 6 +++---
 4 files changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 969ef07..9ffcc56 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -119,6 +119,7 @@  static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
         qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
         qdev_set_nic_properties(dev, nd);
     }
+    object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort);
     s = SYS_BUS_DEVICE(dev);
     sysbus_realize_and_unref(s, &error_fatal);
     sysbus_mmio_map(s, 0, base);
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index e3aa4bd..12ba6c4 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -165,6 +165,7 @@  static void versal_create_gems(Versal *s, qemu_irq *pic)
             qemu_check_nic_model(nd, "cadence_gem");
             qdev_set_nic_properties(dev, nd);
         }
+        object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort);
         object_property_set_int(OBJECT(dev), "num-priority-queues", 2,
                                 &error_abort);
         object_property_set_link(OBJECT(dev), "dma", OBJECT(&s->mr_ps),
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index c435b9d..a85ef4b 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -460,6 +460,7 @@  static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
         }
         object_property_set_int(OBJECT(&s->gem[i]), "revision", GEM_REVISION,
                                 &error_abort);
+        object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort);
         object_property_set_int(OBJECT(&s->gem[i]), "num-priority-queues", 2,
                                 &error_abort);
         if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem[i]), errp)) {
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index d80096b..7a53469 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -250,7 +250,7 @@ 
 #define GEM_PHYMNTNC_REG_SHIFT 18
 
 /* Marvell PHY definitions */
-#define BOARD_PHY_ADDRESS    23 /* PHY address we will emulate a device at */
+#define BOARD_PHY_ADDRESS    0 /* PHY address we will emulate a device at */
 
 #define PHY_REG_CONTROL      0
 #define PHY_REG_STATUS       1
@@ -1446,7 +1446,7 @@  static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
             uint32_t phy_addr, reg_num;
 
             phy_addr = (retval & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT;
-            if (phy_addr == s->phy_addr || phy_addr == 0) {
+            if (phy_addr == s->phy_addr) {
                 reg_num = (retval & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT;
                 retval &= 0xFFFF0000;
                 retval |= gem_phy_read(s, reg_num);
@@ -1569,7 +1569,7 @@  static void gem_write(void *opaque, hwaddr offset, uint64_t val,
             uint32_t phy_addr, reg_num;
 
             phy_addr = (val & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT;
-            if (phy_addr == s->phy_addr || phy_addr == 0) {
+            if (phy_addr == s->phy_addr) {
                 reg_num = (val & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT;
                 gem_phy_write(s, reg_num, val);
             }