| Message ID | 20201013085207.17749-2-chunfeng.yun@mediatek.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/8] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema | expand |
On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote: > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2: modify description and compatible > --- > .../bindings/phy/mediatek,tphy.yaml | 263 ++++++++++++++++++ > .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- > 2 files changed, 263 insertions(+), 162 deletions(-) > create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > new file mode 100755 > index 000000000000..56ad8be69095 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > @@ -0,0 +1,263 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2020 MediaTek > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek T-PHY Controller Device Tree Bindings > + > +maintainers: > + - Chunfeng Yun <chunfeng.yun@mediatek.com> > + > +description: | > + The T-PHY controller supports physical layer functionality for a number of > + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. > + > + Layout differences of banks between T-PHY V1 (mt8173/mt2701) and > + T-PHY V2 (mt2712) when works on USB mode: > + ----------------------------------- > + Version 1: > + port offset bank > + shared 0x0000 SPLLC > + 0x0100 FMREG > + u2 port0 0x0800 U2PHY_COM > + u3 port0 0x0900 U3PHYD > + 0x0a00 U3PHYD_BANK2 > + 0x0b00 U3PHYA > + 0x0c00 U3PHYA_DA > + u2 port1 0x1000 U2PHY_COM > + u3 port1 0x1100 U3PHYD > + 0x1200 U3PHYD_BANK2 > + 0x1300 U3PHYA > + 0x1400 U3PHYA_DA > + u2 port2 0x1800 U2PHY_COM > + ... > + > + Version 2: > + port offset bank > + u2 port0 0x0000 MISC > + 0x0100 FMREG > + 0x0300 U2PHY_COM > + u3 port0 0x0700 SPLLC > + 0x0800 CHIP > + 0x0900 U3PHYD > + 0x0a00 U3PHYD_BANK2 > + 0x0b00 U3PHYA > + 0x0c00 U3PHYA_DA > + u2 port1 0x1000 MISC > + 0x1100 FMREG > + 0x1300 U2PHY_COM > + u3 port1 0x1700 SPLLC > + 0x1800 CHIP > + 0x1900 U3PHYD > + 0x1a00 U3PHYD_BANK2 > + 0x1b00 U3PHYA > + 0x1c00 U3PHYA_DA > + u2 port2 0x2000 MISC > + ... > + > + SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back > + into each port; a new bank MISC for u2 ports and CHIP for u3 ports are > + added on V2. > + > +properties: > + $nodename: > + pattern: "^t-phy@[0-9a-f]+$" Wrong indentation. Should be 1 less. > + > + compatible: > + oneOf: > + - items: > + - enum: > + - mediatek,mt2701-tphy > + - mediatek,mt7623-tphy > + - mediatek,mt7622-tphy > + - mediatek,mt8516-tphy > + - const: mediatek,generic-tphy-v1 > + - items: > + - enum: > + - mediatek,mt2712-tphy > + - mediatek,mt7629-tphy > + - mediatek,mt8183-tphy > + - const: mediatek,generic-tphy-v2 > + - const: mediatek,mt2701-u3phy > + deprecated: true > + - const: mediatek,mt2712-u3phy > + deprecated: true > + - const: mediatek,mt8173-u3phy > + > + reg: > + description: | Don't need '|' if there's no formatting to preserve. > + Register shared by multiple ports, exclude port's private register. > + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for > + T-PHY V2, such as mt2712. > + maxItems: 1 > + > + "#address-cells": > + enum: [1, 2] > + > + "#size-cells": > + enum: [1, 2] Wrong indent. > + > + # Used with non-empty value if optional 'reg' is not provided. > + # The format of the value is an arbitrary number of triplets of > + # (child-bus-address, parent-bus-address, length). > + ranges: true > + > + mediatek,src-ref-clk-mhz: > + description: > + Frequency of reference clock for slew rate calibrate > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 26 > + > + mediatek,src-coef: > + description: > + Coefficient for slew rate calibrate, depends on SoC process > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 28 > + > +# Required child node: > +patternProperties: > + "^usb-phy@[0-9a-f]+$": > + type: object > + description: | > + A sub-node is required for each port the controller provides. > + Address range information including the usual 'reg' property > + is used inside these nodes to describe the controller's topology. > + > + properties: > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + items: > + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) > + - description: Reference clock of analog phy > + description: | > + Uses both clocks if the clock of analog and digital phys are > + separated, otherwise uses "ref" clock only if needed. > + > + clock-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: ref > + - const: da_ref > + > + "#phy-cells": > + const: 1 > + description: | > + The cells contain the following arguments. > + > + - description: The PHY type > + enum: > + - PHY_TYPE_USB2 > + - PHY_TYPE_USB3 > + - PHY_TYPE_PCIE > + - PHY_TYPE_SATA > + > + #The following optional vendor properties are only for debug or HQA test space ^ > + mediatek,eye-src: > + description: > + The value of slew rate calibrate (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 7 > + > + mediatek,eye-vrt: > + description: > + The selection of VRT reference voltage (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 7 > + > + mediatek,eye-term: > + description: > + The selection of HS_TX TERM reference voltage (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 7 > + > + mediatek,intr: > + description: > + The selection of internal resistor (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 31 > + > + mediatek,discth: > + description: > + The selection of disconnect threshold (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 15 > + > + mediatek,bc12: > + description: > + Specify the flag to enable BC1.2 if support it > + type: boolean > + > + required: > + - reg > + - "#phy-cells" > + > + additionalProperties: false > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt8173-clk.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/phy/phy.h> > + susb: usb@11271000 { Drop unused labels. > + compatible = "mediatek,mt8173-mtu3"; > + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; > + reg-names = "mac", "ippc"; > + phys = <&u2port0 PHY_TYPE_USB2>, > + <&u3port0 PHY_TYPE_USB3>, > + <&u2port1 PHY_TYPE_USB2>; > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + u3phy: t-phy@11290000 { > + compatible = "mediatek,mt8173-u3phy"; > + reg = <0x11290000 0x800>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "okay"; Don't show status in examples. > + > + u2port0: usb-phy@11290800 { > + reg = <0x11290800 0x100>; > + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>; > + clock-names = "ref", "da_ref"; > + #phy-cells = <1>; > + status = "okay"; > + }; > + > + u3port0: usb-phy@11290900 { > + reg = <0x11290900 0x700>; > + clocks = <&clk26m>; > + clock-names = "ref"; > + #phy-cells = <1>; > + status = "okay"; > + }; > + > + u2port1: usb-phy@11291000 { > + reg = <0x11291000 0x100>; > + #phy-cells = <1>; > + status = "okay"; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt > deleted file mode 100644 > index dd75b676b71d..000000000000 > --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt > +++ /dev/null > @@ -1,162 +0,0 @@ > -MediaTek T-PHY binding > --------------------------- > - > -T-phy controller supports physical layer functionality for a number of > -controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. > - > -Required properties (controller (parent) node): > - - compatible : should be one of > - "mediatek,generic-tphy-v1" > - "mediatek,generic-tphy-v2" > - "mediatek,mt2701-u3phy" (deprecated) > - "mediatek,mt2712-u3phy" (deprecated) > - "mediatek,mt8173-u3phy"; > - make use of "mediatek,generic-tphy-v1" on mt2701 instead and > - "mediatek,generic-tphy-v2" on mt2712 instead. > - > -- #address-cells: the number of cells used to represent physical > - base addresses. > -- #size-cells: the number of cells used to represent the size of an address. > -- ranges: the address mapping relationship to the parent, defined with > - - empty value: if optional 'reg' is used. > - - non-empty value: if optional 'reg' is not used. should set > - the child's base address to 0, the physical address > - within parent's address space, and the length of > - the address map. > - > -Required nodes : a sub-node is required for each port the controller > - provides. Address range information including the usual > - 'reg' property is used inside these nodes to describe > - the controller's topology. > - > -Optional properties (controller (parent) node): > - - reg : offset and length of register shared by multiple ports, > - exclude port's private register. It is needed on mt2701 > - and mt8173, but not on mt2712. > - - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate > - calibrate > - - mediatek,src-coef : coefficient for slew rate calibrate, depends on > - SoC process > - > -Required properties (port (child) node): > -- reg : address and length of the register set for the port. > -- #phy-cells : should be 1 (See second example) > - cell after port phandle is phy type from: > - - PHY_TYPE_USB2 > - - PHY_TYPE_USB3 > - - PHY_TYPE_PCIE > - - PHY_TYPE_SATA > - > -Optional properties (PHY_TYPE_USB2 port (child) node): > -- clocks : a list of phandle + clock-specifier pairs, one for each > - entry in clock-names > -- clock-names : may contain > - "ref": 48M reference clock for HighSpeed (digital) phy; and 26M > - reference clock for SuperSpeed (digital) phy, sometimes is > - 24M, 25M or 27M, depended on platform. > - "da_ref": the reference clock of analog phy, used if the clocks > - of analog and digital phys are separated, otherwise uses > - "ref" clock only if needed. > - > -- mediatek,eye-src : u32, the value of slew rate calibrate > -- mediatek,eye-vrt : u32, the selection of VRT reference voltage > -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage > -- mediatek,bc12 : bool, enable BC12 of u2phy if support it > -- mediatek,discth : u32, the selection of disconnect threshold > -- mediatek,intr : u32, the selection of internal R (resistance) > - > -Example: > - > -u3phy: usb-phy@11290000 { > - compatible = "mediatek,mt8173-u3phy"; > - reg = <0 0x11290000 0 0x800>; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - u2port0: usb-phy@11290800 { > - reg = <0 0x11290800 0 0x100>; > - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; > - clock-names = "ref"; > - #phy-cells = <1>; > - }; > - > - u3port0: usb-phy@11290900 { > - reg = <0 0x11290800 0 0x700>; > - clocks = <&clk26m>; > - clock-names = "ref"; > - #phy-cells = <1>; > - }; > - > - u2port1: usb-phy@11291000 { > - reg = <0 0x11291000 0 0x100>; > - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; > - clock-names = "ref"; > - #phy-cells = <1>; > - }; > -}; > - > -Specifying phy control of devices > ---------------------------------- > - > -Device nodes should specify the configuration required in their "phys" > -property, containing a phandle to the phy port node and a device type; > -phy-names for each port are optional. > - > -Example: > - > -#include <dt-bindings/phy/phy.h> > - > -usb30: usb@11270000 { > - ... > - phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; > - phy-names = "usb2-0", "usb3-0"; > - ... > -}; > - > - > -Layout differences of banks between mt8173/mt2701 and mt2712 > -------------------------------------------------------------- > -mt8173 and mt2701: > -port offset bank > -shared 0x0000 SPLLC > - 0x0100 FMREG > -u2 port0 0x0800 U2PHY_COM > -u3 port0 0x0900 U3PHYD > - 0x0a00 U3PHYD_BANK2 > - 0x0b00 U3PHYA > - 0x0c00 U3PHYA_DA > -u2 port1 0x1000 U2PHY_COM > -u3 port1 0x1100 U3PHYD > - 0x1200 U3PHYD_BANK2 > - 0x1300 U3PHYA > - 0x1400 U3PHYA_DA > -u2 port2 0x1800 U2PHY_COM > - ... > - > -mt2712: > -port offset bank > -u2 port0 0x0000 MISC > - 0x0100 FMREG > - 0x0300 U2PHY_COM > -u3 port0 0x0700 SPLLC > - 0x0800 CHIP > - 0x0900 U3PHYD > - 0x0a00 U3PHYD_BANK2 > - 0x0b00 U3PHYA > - 0x0c00 U3PHYA_DA > -u2 port1 0x1000 MISC > - 0x1100 FMREG > - 0x1300 U2PHY_COM > -u3 port1 0x1700 SPLLC > - 0x1800 CHIP > - 0x1900 U3PHYD > - 0x1a00 U3PHYD_BANK2 > - 0x1b00 U3PHYA > - 0x1c00 U3PHYA_DA > -u2 port2 0x2000 MISC > - ... > - > - SPLLC shared by u3 ports and FMREG shared by u2 ports on > -mt8173/mt2701 are put back into each port; a new bank MISC for > -u2 ports and CHIP for u3 ports are added on mt2712. > -- > 2.18.0
On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote: > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2: modify description and compatible > --- > .../bindings/phy/mediatek,tphy.yaml | 263 ++++++++++++++++++ > .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- > 2 files changed, 263 insertions(+), 162 deletions(-) > create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml Also, need to fix the mode. > delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
On Fri, 2020-10-16 at 12:04 -0500, Rob Herring wrote: > On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote: > > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v2: modify description and compatible > > --- > > .../bindings/phy/mediatek,tphy.yaml | 263 ++++++++++++++++++ > > .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- > > 2 files changed, 263 insertions(+), 162 deletions(-) > > create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > new file mode 100755 > > index 000000000000..56ad8be69095 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > @@ -0,0 +1,263 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +# Copyright (c) 2020 MediaTek > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: MediaTek T-PHY Controller Device Tree Bindings > > + > > +maintainers: > > + - Chunfeng Yun <chunfeng.yun@mediatek.com> > > + > > +description: | > > + The T-PHY controller supports physical layer functionality for a number of > > + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. [...] > > +properties: > > + $nodename: > > + pattern: "^t-phy@[0-9a-f]+$" > > Wrong indentation. Should be 1 less. Yes, will fix it > > > + > > + compatible: > > + oneOf: > > + - items: > > + - enum: > > + - mediatek,mt2701-tphy > > + - mediatek,mt7623-tphy > > + - mediatek,mt7622-tphy > > + - mediatek,mt8516-tphy > > + - const: mediatek,generic-tphy-v1 > > + - items: > > + - enum: > > + - mediatek,mt2712-tphy > > + - mediatek,mt7629-tphy > > + - mediatek,mt8183-tphy > > + - const: mediatek,generic-tphy-v2 > > + - const: mediatek,mt2701-u3phy > > + deprecated: true > > + - const: mediatek,mt2712-u3phy > > + deprecated: true > > + - const: mediatek,mt8173-u3phy > > + > > + reg: > > + description: | > > Don't need '|' if there's no formatting to preserve. Got it > > > + Register shared by multiple ports, exclude port's private register. > > + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for > > + T-PHY V2, such as mt2712. > > + maxItems: 1 > > + > > + "#address-cells": > > + enum: [1, 2] > > + > > + "#size-cells": > > + enum: [1, 2] > > Wrong indent. Will fix it and check it in other patches > > > + > > + # Used with non-empty value if optional 'reg' is not provided. > > + # The format of the value is an arbitrary number of triplets of > > + # (child-bus-address, parent-bus-address, length). > > + ranges: true > > + > > + mediatek,src-ref-clk-mhz: > > + description: > > + Frequency of reference clock for slew rate calibrate > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + default: 26 > > + > > + mediatek,src-coef: > > + description: > > + Coefficient for slew rate calibrate, depends on SoC process > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + default: 28 > > + > > +# Required child node: > > +patternProperties: > > + "^usb-phy@[0-9a-f]+$": > > + type: object > > + description: | > > + A sub-node is required for each port the controller provides. > > + Address range information including the usual 'reg' property > > + is used inside these nodes to describe the controller's topology. > > + > > + properties: > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 1 > > + maxItems: 2 > > + items: > > + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) > > + - description: Reference clock of analog phy > > + description: | > > + Uses both clocks if the clock of analog and digital phys are > > + separated, otherwise uses "ref" clock only if needed. > > + > > + clock-names: > > + minItems: 1 > > + maxItems: 2 > > + items: > > + - const: ref > > + - const: da_ref > > + > > + "#phy-cells": > > + const: 1 > > + description: | > > + The cells contain the following arguments. > > + > > + - description: The PHY type > > + enum: > > + - PHY_TYPE_USB2 > > + - PHY_TYPE_USB3 > > + - PHY_TYPE_PCIE > > + - PHY_TYPE_SATA > > + > > + #The following optional vendor properties are only for debug or HQA test > > space ^ Ok, will add it > > > + mediatek,eye-src: > > + description: > > + The value of slew rate calibrate (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 7 > > + > > + mediatek,eye-vrt: > > + description: > > + The selection of VRT reference voltage (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 7 > > + > > + mediatek,eye-term: > > + description: > > + The selection of HS_TX TERM reference voltage (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 7 > > + > > + mediatek,intr: > > + description: > > + The selection of internal resistor (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 31 > > + > > + mediatek,discth: > > + description: > > + The selection of disconnect threshold (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 15 > > + > > + mediatek,bc12: > > + description: > > + Specify the flag to enable BC1.2 if support it > > + type: boolean > > + > > + required: > > + - reg > > + - "#phy-cells" > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - "#address-cells" > > + - "#size-cells" > > + - ranges > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/mt8173-clk.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/phy/phy.h> > > + susb: usb@11271000 { > > Drop unused labels. Ok > > > + compatible = "mediatek,mt8173-mtu3"; > > + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; > > + reg-names = "mac", "ippc"; > > + phys = <&u2port0 PHY_TYPE_USB2>, > > + <&u3port0 PHY_TYPE_USB3>, > > + <&u2port1 PHY_TYPE_USB2>; > > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + u3phy: t-phy@11290000 { > > + compatible = "mediatek,mt8173-u3phy"; > > + reg = <0x11290000 0x800>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + status = "okay"; > > Don't show status in examples. Ok, will remove it Thanks a lot > > > + > > + u2port0: usb-phy@11290800 { > > + reg = <0x11290800 0x100>; > > + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>; > > + clock-names = "ref", "da_ref"; > > + #phy-cells = <1>; > > + status = "okay"; > > + }; [...] > > 2.18.0
On Fri, 2020-10-16 at 12:05 -0500, Rob Herring wrote: > On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote: > > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v2: modify description and compatible > > --- > > .../bindings/phy/mediatek,tphy.yaml | 263 ++++++++++++++++++ > > .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- > > 2 files changed, 263 insertions(+), 162 deletions(-) > > create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > Also, need to fix the mode. Ok, thanks > > > delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml new file mode 100755 index 000000000000..56ad8be69095 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -0,0 +1,263 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek T-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The T-PHY controller supports physical layer functionality for a number of + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. + + Layout differences of banks between T-PHY V1 (mt8173/mt2701) and + T-PHY V2 (mt2712) when works on USB mode: + ----------------------------------- + Version 1: + port offset bank + shared 0x0000 SPLLC + 0x0100 FMREG + u2 port0 0x0800 U2PHY_COM + u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 U2PHY_COM + u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA + u2 port2 0x1800 U2PHY_COM + ... + + Version 2: + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA + u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back + into each port; a new bank MISC for u2 ports and CHIP for u3 ports are + added on V2. + +properties: + $nodename: + pattern: "^t-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-tphy + - mediatek,mt7623-tphy + - mediatek,mt7622-tphy + - mediatek,mt8516-tphy + - const: mediatek,generic-tphy-v1 + - items: + - enum: + - mediatek,mt2712-tphy + - mediatek,mt7629-tphy + - mediatek,mt8183-tphy + - const: mediatek,generic-tphy-v2 + - const: mediatek,mt2701-u3phy + deprecated: true + - const: mediatek,mt2712-u3phy + deprecated: true + - const: mediatek,mt8173-u3phy + + reg: + description: | + Register shared by multiple ports, exclude port's private register. + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for + T-PHY V2, such as mt2712. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + # Used with non-empty value if optional 'reg' is not provided. + # The format of the value is an arbitrary number of triplets of + # (child-bus-address, parent-bus-address, length). + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + $ref: /schemas/types.yaml#/definitions/uint32 + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 28 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: | + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + - description: Reference clock of analog phy + description: | + Uses both clocks if the clock of analog and digital phys are + separated, otherwise uses "ref" clock only if needed. + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: da_ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + + #The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,intr: + description: + The selection of internal resistor (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,discth: + description: + The selection of disconnect threshold (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 15 + + mediatek,bc12: + description: + Specify the flag to enable BC1.2 if support it + type: boolean + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + susb: usb@11271000 { + compatible = "mediatek,mt8173-mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + }; + + u3phy: t-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0x11290000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "okay"; + + u2port0: usb-phy@11290800 { + reg = <0x11290800 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11290900 { + reg = <0x11290900 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11291000 { + reg = <0x11291000 0x100>; + #phy-cells = <1>; + status = "okay"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt deleted file mode 100644 index dd75b676b71d..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ /dev/null @@ -1,162 +0,0 @@ -MediaTek T-PHY binding --------------------------- - -T-phy controller supports physical layer functionality for a number of -controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. - -Required properties (controller (parent) node): - - compatible : should be one of - "mediatek,generic-tphy-v1" - "mediatek,generic-tphy-v2" - "mediatek,mt2701-u3phy" (deprecated) - "mediatek,mt2712-u3phy" (deprecated) - "mediatek,mt8173-u3phy"; - make use of "mediatek,generic-tphy-v1" on mt2701 instead and - "mediatek,generic-tphy-v2" on mt2712 instead. - -- #address-cells: the number of cells used to represent physical - base addresses. -- #size-cells: the number of cells used to represent the size of an address. -- ranges: the address mapping relationship to the parent, defined with - - empty value: if optional 'reg' is used. - - non-empty value: if optional 'reg' is not used. should set - the child's base address to 0, the physical address - within parent's address space, and the length of - the address map. - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple ports, - exclude port's private register. It is needed on mt2701 - and mt8173, but not on mt2712. - - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : coefficient for slew rate calibrate, depends on - SoC process - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- #phy-cells : should be 1 (See second example) - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - - PHY_TYPE_PCIE - - PHY_TYPE_SATA - -Optional properties (PHY_TYPE_USB2 port (child) node): -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : may contain - "ref": 48M reference clock for HighSpeed (digital) phy; and 26M - reference clock for SuperSpeed (digital) phy, sometimes is - 24M, 25M or 27M, depended on platform. - "da_ref": the reference clock of analog phy, used if the clocks - of analog and digital phys are separated, otherwise uses - "ref" clock only if needed. - -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,bc12 : bool, enable BC12 of u2phy if support it -- mediatek,discth : u32, the selection of disconnect threshold -- mediatek,intr : u32, the selection of internal R (resistance) - -Example: - -u3phy: usb-phy@11290000 { - compatible = "mediatek,mt8173-u3phy"; - reg = <0 0x11290000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11290800 { - reg = <0 0x11290800 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11290900 { - reg = <0 0x11290800 0 0x700>; - clocks = <&clk26m>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u2port1: usb-phy@11291000 { - reg = <0 0x11291000 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; -}; - -Specifying phy control of devices ---------------------------------- - -Device nodes should specify the configuration required in their "phys" -property, containing a phandle to the phy port node and a device type; -phy-names for each port are optional. - -Example: - -#include <dt-bindings/phy/phy.h> - -usb30: usb@11270000 { - ... - phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; - phy-names = "usb2-0", "usb3-0"; - ... -}; - - -Layout differences of banks between mt8173/mt2701 and mt2712 -------------------------------------------------------------- -mt8173 and mt2701: -port offset bank -shared 0x0000 SPLLC - 0x0100 FMREG -u2 port0 0x0800 U2PHY_COM -u3 port0 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 U2PHY_COM -u3 port1 0x1100 U3PHYD - 0x1200 U3PHYD_BANK2 - 0x1300 U3PHYA - 0x1400 U3PHYA_DA -u2 port2 0x1800 U2PHY_COM - ... - -mt2712: -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u3 port0 0x0700 SPLLC - 0x0800 CHIP - 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u3 port1 0x1700 SPLLC - 0x1800 CHIP - 0x1900 U3PHYD - 0x1a00 U3PHYD_BANK2 - 0x1b00 U3PHYA - 0x1c00 U3PHYA_DA -u2 port2 0x2000 MISC - ... - - SPLLC shared by u3 ports and FMREG shared by u2 ports on -mt8173/mt2701 are put back into each port; a new bank MISC for -u2 ports and CHIP for u3 ports are added on mt2712.
Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: modify description and compatible --- .../bindings/phy/mediatek,tphy.yaml | 263 ++++++++++++++++++ .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- 2 files changed, 263 insertions(+), 162 deletions(-) create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt -- 2.18.0