[v4,1/4] dt-bindings: mmc: Convert mtk-sd to json-schema

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
deleted file mode 100644
index 26a8f320a156..000000000000
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ /dev/null
@@ -1,75 +0,0 @@ 
-* MTK MMC controller
-
-The MTK  MSDC can act as a MMC controller
-to support MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the msdc driver.
-
-Required properties:
-- compatible: value should be either of the following.
-	"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
-	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
-	"mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
-	"mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
-	"mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
-	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
-	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
-	"mediatek,mt7622-mmc": for MT7622 SoC
-	"mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
-	"mediatek,mt7620-mmc", for MT7621 SoC (and others)
-
-- reg: physical base address of the controller and length
-- interrupts: Should contain MSDC interrupt number
-- clocks: Should contain phandle for the clock feeding the MMC controller
-- clock-names: Should contain the following:
-	"source" - source clock (required)
-	"hclk" - HCLK which used for host (required)
-	"source_cg" - independent source clock gate (required for MT2712)
-	"bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin ctrl
-- pinctrl-1: should contain uhs mode pin ctrl
-- vmmc-supply: power to the Core
-- vqmmc-supply: power to the IO
-
-Optional properties:
-- assigned-clocks: PLL of the source clock
-- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
-- hs400-ds-delay: HS400 DS delay setting
-- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
-				This field has total 32 stages.
-				The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
-				This field has total 32 stages.
-				The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-resp-sel-rising:  HS400 command response sample selection
-				       If present,HS400 command responses are sampled on rising edges.
-				       If not present,HS400 command responses are sampled on falling edges.
-- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
-		     error caused by stop clock(fifo full)
-		     Valid range = [0:0x7]. if not present, default value is 0.
-		     applied to compatible "mediatek,mt2701-mmc".
-- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
-- reset-names: Should be "hrst".
-
-Examples:
-mmc0: mmc@11230000 {
-	compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
-	reg = <0 0x11230000 0 0x108>;
-	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
-	vmmc-supply = <&mt6397_vemc_3v3_reg>;
-	vqmmc-supply = <&mt6397_vio18_reg>;
-	clocks = <&pericfg CLK_PERI_MSDC30_0>,
-	         <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
-	clock-names = "source", "hclk";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
-	hs400-ds-delay = <0x14015>;
-	mediatek,hs200-cmd-int-delay = <26>;
-	mediatek,hs400-cmd-int-delay = <14>;
-	mediatek,hs400-cmd-resp-sel-rising;
-};
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
new file mode 100644
index 000000000000..21a2fce5b7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -0,0 +1,163 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTK MSDC Storage Host Controller Binding
+
+maintainers:
+  - Chaotian Jing <chaotian.jing@mediatek.com>
+  - Wenbin Mei <wenbin.mei@mediatek.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+        - mediatek,mt2701-mmc
+        - mediatek,mt2712-mmc
+        - mediatek,mt6779-mmc
+        - mediatek,mt7620-mmc
+        - mediatek,mt7622-mmc
+        - mediatek,mt8135-mmc
+        - mediatek,mt8173-mmc
+        - mediatek,mt8183-mmc
+        - mediatek,mt8516-mmc
+      - items:
+        - const: mediatek,mt7623-mmc
+        - const: mediatek,mt2701-mmc
+
+  clocks:
+    description:
+      Should contain phandle for the clock feeding the MMC controller.
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: source clock (required).
+      - description: HCLK which used for host (required).
+      - description: independent source clock gate (required for MT2712).
+      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      - const: source
+      - const: hclk
+      - const: source_cg
+      - const: bus_clk
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: state_uhs
+
+  pinctrl-0:
+    description:
+      should contain default/high speed pin ctrl.
+    maxItems: 1
+
+  pinctrl-1:
+    description:
+      should contain uhs mode pin ctrl.
+    maxItems: 1
+
+  assigned-clocks:
+    description:
+      PLL of the source clock.
+    maxItems: 1
+
+  assigned-clock-parents:
+    description:
+      parent of source clock, used for HS400 mode to get 400Mhz source clock.
+    maxItems: 1
+
+  hs400-ds-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 DS delay setting.
+    minimum: 0
+    maximum: 0xffffffff
+
+  mediatek,hs200-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS200 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-resp-sel-rising:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      HS400 command response sample selection.
+      If present, HS400 command responses are sampled on rising edges.
+      If not present, HS400 command responses are sampled on falling edges.
+
+  mediatek,latch-ck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
+      data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
+      if not present, default value is 0.
+      applied to compatible "mediatek,mt2701-mmc".
+    minimum: 0
+    maximum: 7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: hrst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-names
+  - pinctrl-0
+  - pinctrl-1
+  - vmmc-supply
+  - vqmmc-supply
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    mmc0: mmc@11230000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11230000 0x1000>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+        vmmc-supply = <&mt6397_vemc_3v3_reg>;
+        vqmmc-supply = <&mt6397_vio18_reg>;
+        clocks = <&pericfg CLK_PERI_MSDC30_0>,
+                 <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+        clock-names = "source", "hclk";
+        pinctrl-names = "default", "state_uhs";
+        pinctrl-0 = <&mmc0_pins_default>;
+        pinctrl-1 = <&mmc0_pins_uhs>;
+        assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+        hs400-ds-delay = <0x14015>;
+        mediatek,hs200-cmd-int-delay = <26>;
+        mediatek,hs400-cmd-int-delay = <14>;
+        mediatek,hs400-cmd-resp-sel-rising;
+    };
+
+...