diff mbox series

[v2,1/3] dt-bindings: ov2680: convert bindings to yaml

Message ID 20201014142759.726823-2-rmfrfs@gmail.com
State Superseded
Headers show
Series [v2,1/3] dt-bindings: ov2680: convert bindings to yaml | expand

Commit Message

Rui Miguel Silva Oct. 14, 2020, 2:27 p.m. UTC
Convert ov2680 sensor bindings documentation to yaml schema, remove
the textual bindings document and update MAINTAINERS entry.

Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
---
  
v1 -> v2:
  Sakari Ailus - Patch 1/3:
  https://lore.kernel.org/linux-media/20201013160908.GC13341@paasikivi.fi.intel.com/
  - omit remote-endpoint
  - remove not needed clock-lanes and data-lanes

 .../devicetree/bindings/media/i2c/ov2680.txt  |  46 --------
 .../devicetree/bindings/media/i2c/ov2680.yaml | 109 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 110 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.yaml

Comments

Jacopo Mondi Oct. 15, 2020, 2:49 p.m. UTC | #1
Hi Rui,

On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote:
> Convert ov2680 sensor bindings documentation to yaml schema, remove
> the textual bindings document and update MAINTAINERS entry.
>
> Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> ---
>
> v1 -> v2:
>   Sakari Ailus - Patch 1/3:
>   https://lore.kernel.org/linux-media/20201013160908.GC13341@paasikivi.fi.intel.com/
>   - omit remote-endpoint
>   - remove not needed clock-lanes and data-lanes
>
>  .../devicetree/bindings/media/i2c/ov2680.txt  |  46 --------
>  .../devicetree/bindings/media/i2c/ov2680.yaml | 109 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 110 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
> deleted file mode 100644
> index 11e925ed9dad..000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -* Omnivision OV2680 MIPI CSI-2 sensor
> -
> -Required Properties:
> -- compatible: should be "ovti,ov2680".
> -- clocks: reference to the xvclk input clock.
> -- clock-names: should be "xvclk".
> -- DOVDD-supply: Digital I/O voltage supply.
> -- DVDD-supply: Digital core voltage supply.
> -- AVDD-supply: Analog voltage supply.
> -
> -Optional Properties:
> -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
> -               if any. This is an active low signal to the OV2680.
> -
> -The device node must contain one 'port' child node for its digital output
> -video port, and this port must have a single endpoint in accordance with
> - the video interface bindings defined in
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> -Endpoint node required properties for CSI-2 connection are:
> -- remote-endpoint: a phandle to the bus receiver's endpoint node.
> -- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
> -- data-lanes: should be set to <1> (one CSI-2 lane supported).
> -
> -Example:
> -
> -&i2c2 {
> -	ov2680: camera-sensor@36 {
> -		compatible = "ovti,ov2680";
> -		reg = <0x36>;
> -		clocks = <&osc>;
> -		clock-names = "xvclk";
> -		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> -		DOVDD-supply = <&sw2_reg>;
> -		DVDD-supply = <&sw2_reg>;
> -		AVDD-supply = <&reg_peri_3p15v>;
> -
> -		port {
> -			ov2680_to_mipi: endpoint {
> -				remote-endpoint = <&mipi_from_sensor>;
> -				clock-lanes = <0>;
> -				data-lanes = <1>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml

Might this be a good occasion to rename the file to ovti,ov2680.yaml ?

> new file mode 100644
> index 000000000000..ef2b45b03dcc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ov2680.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV2680 CMOS Sensor
> +
> +maintainers:
> +  - Rui Miguel Silva <rmfrfs@gmail.com>
> +
> +description: |-
> +  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
> +  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
> +  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
> +  various formats via the control of the Serial Camera Control Bus (SCCB)
> +  interface.  The OV2680 has an image array capable of operating at up to 30
                ^ double space

> +  frames per second (fps) in UXGA resolution.
> +
> +properties:
> +  compatible:
> +    const: ovti,ov2680
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:

I'll never get yaml right, doesn't breaking lines require '|' after
the semicolon ? The validator does not complain, so I guess not.

> +      Input clock for the sensor.
> +    items:
> +      - const: xvclk
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +      This corresponds to the hardware pin XSHUTDOWN which is physically
> +      active low.
> +
> +  dovdd-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +
> +  avdd-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +  dvdd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +
> +  port:
> +    type: object
> +    additionalProperties: false
> +    description:
> +      A node containing an output port node with an endpoint definition
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      endpoint:
> +        type: object
> +
> +    required:
> +      - endpoint

If no endpoint properties are specified, the last 6 lines here can be
omitted. The rationale is that 'port' will be validated against a
forthcoming 'of-graph.yaml' schema. So just:

   port:
     type: object
     additionalProperties: false
     description:
       A node containing an output port node with an endpoint definition
       as documented in
       Documentation/devicetree/bindings/media/video-interfaces.txt

With 'port' listed as mandatory, as you do already.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - reset-gpios
> +  - port
> +
> +unevaluatedProperties: false

'additionalProperties: false' too ?

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov2680: camera-sensor@36 {
> +                compatible = "ovti,ov2680";
> +                reg = <0x36>;
> +                clocks = <&osc>;
> +                clock-names = "xvclk";
> +                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> +
> +                dovdd-supply = <&sw2_reg>;
> +                dvdd-supply = <&sw2_reg>;
> +                avdd-supply = <&reg_peri_3p15v>;
> +
> +                port {
> +                        ov2680_to_mipi: endpoint {
> +                                remote-endpoint = <&mipi_from_sensor>;
> +                        };
> +                };
> +        };
> +    };
> +...
> +

Applying the patch gives me:
.git/rebase-apply/patch:182: new blank line at EOF.

I see most bindings have an empty line before '...'

With this small issues fixed:
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks
   j

> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2e85e114c9c3..926dcdc4794c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12775,7 +12775,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/i2c/ov2680.txt
> +F:	Documentation/devicetree/bindings/media/i2c/ov2680.yaml
>  F:	drivers/media/i2c/ov2680.c
>
>  OMNIVISION OV2685 SENSOR DRIVER
> --
> 2.28.0
>
Rui Miguel Silva Oct. 16, 2020, 2:42 p.m. UTC | #2
Hey Jacopo,
Thanks for the review.

On Thu, Oct 15, 2020 at 04:49:05PM +0200, Jacopo Mondi wrote:
> Hi Rui,

> 

> On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote:

> > Convert ov2680 sensor bindings documentation to yaml schema, remove

> > the textual bindings document and update MAINTAINERS entry.

> >

> > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>

> > ---

> >

> > v1 -> v2:

> >   Sakari Ailus - Patch 1/3:

> >   https://lore.kernel.org/linux-media/20201013160908.GC13341@paasikivi.fi.intel.com/

> >   - omit remote-endpoint

> >   - remove not needed clock-lanes and data-lanes

> >

> >  .../devicetree/bindings/media/i2c/ov2680.txt  |  46 --------

> >  .../devicetree/bindings/media/i2c/ov2680.yaml | 109 ++++++++++++++++++

> >  MAINTAINERS                                   |   2 +-

> >  3 files changed, 110 insertions(+), 47 deletions(-)

> >  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt

> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.yaml

> >

> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt

> > deleted file mode 100644

> > index 11e925ed9dad..000000000000

> > --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt

> > +++ /dev/null

> > @@ -1,46 +0,0 @@

> > -* Omnivision OV2680 MIPI CSI-2 sensor

> > -

> > -Required Properties:

> > -- compatible: should be "ovti,ov2680".

> > -- clocks: reference to the xvclk input clock.

> > -- clock-names: should be "xvclk".

> > -- DOVDD-supply: Digital I/O voltage supply.

> > -- DVDD-supply: Digital core voltage supply.

> > -- AVDD-supply: Analog voltage supply.

> > -

> > -Optional Properties:

> > -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,

> > -               if any. This is an active low signal to the OV2680.

> > -

> > -The device node must contain one 'port' child node for its digital output

> > -video port, and this port must have a single endpoint in accordance with

> > - the video interface bindings defined in

> > -Documentation/devicetree/bindings/media/video-interfaces.txt.

> > -

> > -Endpoint node required properties for CSI-2 connection are:

> > -- remote-endpoint: a phandle to the bus receiver's endpoint node.

> > -- clock-lanes: should be set to <0> (clock lane on hardware lane 0).

> > -- data-lanes: should be set to <1> (one CSI-2 lane supported).

> > -

> > -Example:

> > -

> > -&i2c2 {

> > -	ov2680: camera-sensor@36 {

> > -		compatible = "ovti,ov2680";

> > -		reg = <0x36>;

> > -		clocks = <&osc>;

> > -		clock-names = "xvclk";

> > -		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;

> > -		DOVDD-supply = <&sw2_reg>;

> > -		DVDD-supply = <&sw2_reg>;

> > -		AVDD-supply = <&reg_peri_3p15v>;

> > -

> > -		port {

> > -			ov2680_to_mipi: endpoint {

> > -				remote-endpoint = <&mipi_from_sensor>;

> > -				clock-lanes = <0>;

> > -				data-lanes = <1>;

> > -			};

> > -		};

> > -	};

> > -};

> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml

> 

> Might this be a good occasion to rename the file to ovti,ov2680.yaml ?


Yeah, was just following your precedent in ov5647 and the other ov
already ported to yaml in the directory. But I agree that it makes
sense to rename the files.

> 

> > new file mode 100644

> > index 000000000000..ef2b45b03dcc

> > --- /dev/null

> > +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml

> > @@ -0,0 +1,109 @@

> > +# SPDX-License-Identifier: GPL-2.0

> > +%YAML 1.2

> > +---

> > +$id: http://devicetree.org/schemas/media/i2c/ov2680.yaml#

> > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > +

> > +title: Omnivision OV2680 CMOS Sensor

> > +

> > +maintainers:

> > +  - Rui Miguel Silva <rmfrfs@gmail.com>

> > +

> > +description: |-

> > +  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2

> > +  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)

> > +  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in

> > +  various formats via the control of the Serial Camera Control Bus (SCCB)

> > +  interface.  The OV2680 has an image array capable of operating at up to 30

>                 ^ double space

> 

> > +  frames per second (fps) in UXGA resolution.

> > +

> > +properties:

> > +  compatible:

> > +    const: ovti,ov2680

> > +

> > +  reg:

> > +    maxItems: 1

> > +

> > +  clocks:

> > +    maxItems: 1

> > +

> > +  clock-names:

> > +    description:

> 

> I'll never get yaml right, doesn't breaking lines require '|' after

> the semicolon ? The validator does not complain, so I guess not.


I also had that idea, but looking also to other cases, and also in the
examlpe-schema where you have both cases, looks like it is not needed.

> 

> > +      Input clock for the sensor.

> > +    items:

> > +      - const: xvclk

> > +

> > +  reset-gpios:

> > +    description:

> > +      The phandle and specifier for the GPIO that controls sensor reset.

> > +      This corresponds to the hardware pin XSHUTDOWN which is physically

> > +      active low.

> > +

> > +  dovdd-supply:

> > +    description:

> > +      Definition of the regulator used as interface power supply.

> > +

> > +  avdd-supply:

> > +    description:

> > +      Definition of the regulator used as analog power supply.

> > +

> > +  dvdd-supply:

> > +    description:

> > +      Definition of the regulator used as digital power supply.

> > +

> > +  port:

> > +    type: object

> > +    additionalProperties: false

> > +    description:

> > +      A node containing an output port node with an endpoint definition

> > +      as documented in

> > +      Documentation/devicetree/bindings/media/video-interfaces.txt

> > +

> > +    properties:

> > +      endpoint:

> > +        type: object

> > +

> > +    required:

> > +      - endpoint

> 

> If no endpoint properties are specified, the last 6 lines here can be

> omitted. The rationale is that 'port' will be validated against a

> forthcoming 'of-graph.yaml' schema. So just:

> 

>    port:

>      type: object

>      additionalProperties: false

>      description:

>        A node containing an output port node with an endpoint definition

>        as documented in

>        Documentation/devicetree/bindings/media/video-interfaces.txt

> 

> With 'port' listed as mandatory, as you do already.


you are right, will fix this.

> 

> > +

> > +required:

> > +  - compatible

> > +  - reg

> > +  - clocks

> > +  - clock-names

> > +  - dovdd-supply

> > +  - avdd-supply

> > +  - dvdd-supply

> > +  - reset-gpios

> > +  - port

> > +

> > +unevaluatedProperties: false

> 

> 'additionalProperties: false' too ?


instead.

> 

> > +

> > +examples:

> > +  - |

> > +    #include <dt-bindings/gpio/gpio.h>

> > +

> > +    i2c {

> > +        #address-cells = <1>;

> > +        #size-cells = <0>;

> > +

> > +        ov2680: camera-sensor@36 {

> > +                compatible = "ovti,ov2680";

> > +                reg = <0x36>;

> > +                clocks = <&osc>;

> > +                clock-names = "xvclk";

> > +                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;

> > +

> > +                dovdd-supply = <&sw2_reg>;

> > +                dvdd-supply = <&sw2_reg>;

> > +                avdd-supply = <&reg_peri_3p15v>;

> > +

> > +                port {

> > +                        ov2680_to_mipi: endpoint {

> > +                                remote-endpoint = <&mipi_from_sensor>;

> > +                        };

> > +                };

> > +        };

> > +    };

> > +...

> > +

> 

> Applying the patch gives me:

> .git/rebase-apply/patch:182: new blank line at EOF.

> 

> I see most bindings have an empty line before '...'

> 

> With this small issues fixed:

> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

 
 Thanks again Jacopo.

 Cheers,
    Rui
> 

> Thanks

>    j

> 

> > diff --git a/MAINTAINERS b/MAINTAINERS

> > index 2e85e114c9c3..926dcdc4794c 100644

> > --- a/MAINTAINERS

> > +++ b/MAINTAINERS

> > @@ -12775,7 +12775,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>

> >  L:	linux-media@vger.kernel.org

> >  S:	Maintained

> >  T:	git git://linuxtv.org/media_tree.git

> > -F:	Documentation/devicetree/bindings/media/i2c/ov2680.txt

> > +F:	Documentation/devicetree/bindings/media/i2c/ov2680.yaml

> >  F:	drivers/media/i2c/ov2680.c

> >

> >  OMNIVISION OV2685 SENSOR DRIVER

> > --

> > 2.28.0

> >
Rob Herring (Arm) Oct. 19, 2020, 8:39 p.m. UTC | #3
On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote:
> Convert ov2680 sensor bindings documentation to yaml schema, remove
> the textual bindings document and update MAINTAINERS entry.
> 
> Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> ---
>   
> v1 -> v2:
>   Sakari Ailus - Patch 1/3:
>   https://lore.kernel.org/linux-media/20201013160908.GC13341@paasikivi.fi.intel.com/
>   - omit remote-endpoint
>   - remove not needed clock-lanes and data-lanes
> 
>  .../devicetree/bindings/media/i2c/ov2680.txt  |  46 --------
>  .../devicetree/bindings/media/i2c/ov2680.yaml | 109 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 110 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
> deleted file mode 100644
> index 11e925ed9dad..000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -* Omnivision OV2680 MIPI CSI-2 sensor
> -
> -Required Properties:
> -- compatible: should be "ovti,ov2680".
> -- clocks: reference to the xvclk input clock.
> -- clock-names: should be "xvclk".
> -- DOVDD-supply: Digital I/O voltage supply.
> -- DVDD-supply: Digital core voltage supply.
> -- AVDD-supply: Analog voltage supply.
> -
> -Optional Properties:
> -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
> -               if any. This is an active low signal to the OV2680.
> -
> -The device node must contain one 'port' child node for its digital output
> -video port, and this port must have a single endpoint in accordance with
> - the video interface bindings defined in
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> -Endpoint node required properties for CSI-2 connection are:
> -- remote-endpoint: a phandle to the bus receiver's endpoint node.
> -- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
> -- data-lanes: should be set to <1> (one CSI-2 lane supported).
> -
> -Example:
> -
> -&i2c2 {
> -	ov2680: camera-sensor@36 {
> -		compatible = "ovti,ov2680";
> -		reg = <0x36>;
> -		clocks = <&osc>;
> -		clock-names = "xvclk";
> -		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> -		DOVDD-supply = <&sw2_reg>;
> -		DVDD-supply = <&sw2_reg>;
> -		AVDD-supply = <&reg_peri_3p15v>;
> -
> -		port {
> -			ov2680_to_mipi: endpoint {
> -				remote-endpoint = <&mipi_from_sensor>;
> -				clock-lanes = <0>;
> -				data-lanes = <1>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml
> new file mode 100644
> index 000000000000..ef2b45b03dcc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ov2680.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV2680 CMOS Sensor
> +
> +maintainers:
> +  - Rui Miguel Silva <rmfrfs@gmail.com>
> +
> +description: |-
> +  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
> +  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
> +  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
> +  various formats via the control of the Serial Camera Control Bus (SCCB)
> +  interface.  The OV2680 has an image array capable of operating at up to 30
> +  frames per second (fps) in UXGA resolution.
> +
> +properties:
> +  compatible:
> +    const: ovti,ov2680
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: xvclk
> +
> +  reset-gpios:

How many? (maxItems: 1)

> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +      This corresponds to the hardware pin XSHUTDOWN which is physically
> +      active low.
> +
> +  dovdd-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +
> +  avdd-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +  dvdd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +
> +  port:
> +    type: object
> +    additionalProperties: false
> +    description:
> +      A node containing an output port node with an endpoint definition
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      endpoint:
> +        type: object
> +
> +    required:
> +      - endpoint

Just need a description of the data/direction for 'port'. Drop the rest.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - reset-gpios
> +  - port
> +
> +unevaluatedProperties: false

You can use 'additionalProperties: false' here instead.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov2680: camera-sensor@36 {
> +                compatible = "ovti,ov2680";
> +                reg = <0x36>;
> +                clocks = <&osc>;
> +                clock-names = "xvclk";
> +                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> +
> +                dovdd-supply = <&sw2_reg>;
> +                dvdd-supply = <&sw2_reg>;
> +                avdd-supply = <&reg_peri_3p15v>;
> +
> +                port {
> +                        ov2680_to_mipi: endpoint {
> +                                remote-endpoint = <&mipi_from_sensor>;
> +                        };
> +                };
> +        };
> +    };
> +...
> +
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2e85e114c9c3..926dcdc4794c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12775,7 +12775,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/i2c/ov2680.txt
> +F:	Documentation/devicetree/bindings/media/i2c/ov2680.yaml
>  F:	drivers/media/i2c/ov2680.c
>  
>  OMNIVISION OV2685 SENSOR DRIVER
> -- 
> 2.28.0
>
Jacopo Mondi Oct. 21, 2020, 3:52 p.m. UTC | #4
Hi Rob,

On Mon, Oct 19, 2020 at 03:33:59PM -0500, Rob Herring wrote:
> On Fri, Oct 16, 2020 at 03:42:04PM +0100, Rui Miguel Silva wrote:
> > Hey Jacopo,
> > Thanks for the review.
> >
> > On Thu, Oct 15, 2020 at 04:49:05PM +0200, Jacopo Mondi wrote:
> > > Hi Rui,
> > >
> > > On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote:
> > > > Convert ov2680 sensor bindings documentation to yaml schema, remove
> > > > the textual bindings document and update MAINTAINERS entry.
> > > >
> > > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
>
> > > > +  clock-names:
> > > > +    description:
> > >
> > > I'll never get yaml right, doesn't breaking lines require '|' after
> > > the semicolon ? The validator does not complain, so I guess not.
> >
> > I also had that idea, but looking also to other cases, and also in the
> > examlpe-schema where you have both cases, looks like it is not needed.
>
> '|' will preserve line breaks and formatting. For a single line like
> this it doesn't really matter. Though ruamel's round trip will make it a
> single line when writing back out.

Thanks for the explanation.

I'll take the occasion to ask the difference between '|', '|-' and
'-|' as I haven't find it documented anywhere.

Thanks
  j

>
> > >
> > > > +      Input clock for the sensor.
>
> Really, you can just drop the description. Doesn't really add anything
> specific for this device.
>
> > > > +    items:
> > > > +      - const: xvclk
Rob Herring (Arm) Dec. 1, 2020, 10:44 p.m. UTC | #5
On Wed, Oct 21, 2020 at 9:52 AM Jacopo Mondi <jacopo@jmondi.org> wrote:
>

> Hi Rob,

>

> On Mon, Oct 19, 2020 at 03:33:59PM -0500, Rob Herring wrote:

> > On Fri, Oct 16, 2020 at 03:42:04PM +0100, Rui Miguel Silva wrote:

> > > Hey Jacopo,

> > > Thanks for the review.

> > >

> > > On Thu, Oct 15, 2020 at 04:49:05PM +0200, Jacopo Mondi wrote:

> > > > Hi Rui,

> > > >

> > > > On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote:

> > > > > Convert ov2680 sensor bindings documentation to yaml schema, remove

> > > > > the textual bindings document and update MAINTAINERS entry.

> > > > >

> > > > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>

> >

> > > > > +  clock-names:

> > > > > +    description:

> > > >

> > > > I'll never get yaml right, doesn't breaking lines require '|' after

> > > > the semicolon ? The validator does not complain, so I guess not.

> > >

> > > I also had that idea, but looking also to other cases, and also in the

> > > examlpe-schema where you have both cases, looks like it is not needed.

> >

> > '|' will preserve line breaks and formatting. For a single line like

> > this it doesn't really matter. Though ruamel's round trip will make it a

> > single line when writing back out.

>

> Thanks for the explanation.

>

> I'll take the occasion to ask the difference between '|', '|-' and

> '-|' as I haven't find it documented anywhere.


https://yaml-multiline.info/

'-|' is not valid AFAIK. Did you mean '- |'?. That's a list entry
which then contains a multi-line string.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
deleted file mode 100644
index 11e925ed9dad..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt
+++ /dev/null
@@ -1,46 +0,0 @@ 
-* Omnivision OV2680 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: should be "ovti,ov2680".
-- clocks: reference to the xvclk input clock.
-- clock-names: should be "xvclk".
-- DOVDD-supply: Digital I/O voltage supply.
-- DVDD-supply: Digital core voltage supply.
-- AVDD-supply: Analog voltage supply.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
-               if any. This is an active low signal to the OV2680.
-
-The device node must contain one 'port' child node for its digital output
-video port, and this port must have a single endpoint in accordance with
- the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Endpoint node required properties for CSI-2 connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
-- data-lanes: should be set to <1> (one CSI-2 lane supported).
-
-Example:
-
-&i2c2 {
-	ov2680: camera-sensor@36 {
-		compatible = "ovti,ov2680";
-		reg = <0x36>;
-		clocks = <&osc>;
-		clock-names = "xvclk";
-		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		DOVDD-supply = <&sw2_reg>;
-		DVDD-supply = <&sw2_reg>;
-		AVDD-supply = <&reg_peri_3p15v>;
-
-		port {
-			ov2680_to_mipi: endpoint {
-				remote-endpoint = <&mipi_from_sensor>;
-				clock-lanes = <0>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml
new file mode 100644
index 000000000000..ef2b45b03dcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml
@@ -0,0 +1,109 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov2680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV2680 CMOS Sensor
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |-
+  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
+  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
+  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
+  various formats via the control of the Serial Camera Control Bus (SCCB)
+  interface.  The OV2680 has an image array capable of operating at up to 30
+  frames per second (fps) in UXGA resolution.
+
+properties:
+  compatible:
+    const: ovti,ov2680
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  port:
+    type: object
+    additionalProperties: false
+    description:
+      A node containing an output port node with an endpoint definition
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2680: camera-sensor@36 {
+                compatible = "ovti,ov2680";
+                reg = <0x36>;
+                clocks = <&osc>;
+                clock-names = "xvclk";
+                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+                dovdd-supply = <&sw2_reg>;
+                dvdd-supply = <&sw2_reg>;
+                avdd-supply = <&reg_peri_3p15v>;
+
+                port {
+                        ov2680_to_mipi: endpoint {
+                                remote-endpoint = <&mipi_from_sensor>;
+                        };
+                };
+        };
+    };
+...
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 2e85e114c9c3..926dcdc4794c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12775,7 +12775,7 @@  M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/i2c/ov2680.txt
+F:	Documentation/devicetree/bindings/media/i2c/ov2680.yaml
 F:	drivers/media/i2c/ov2680.c
 
 OMNIVISION OV2685 SENSOR DRIVER