diff mbox series

[v10,05/15] dt-bindings: connector: Add property to set initial current cap for FRS

Message ID 20201008061556.1402293-6-badhri@google.com
State New
Headers show
Series TCPM support for FRS and AutoDischarge Disconnect | expand

Commit Message

Badhri Jagan Sridharan Oct. 8, 2020, 6:15 a.m. UTC
This change adds frs-typec-current which allows setting the initial current
capability of the new source when vSafe5V is applied during PD3.0
sink Fast Role Swap.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since v1:
- Changing patch version to v6 to fix version number confusion.

Changes since v6:
- Removed the redundant usb-connector.txt that I created by mistake.
- Moved to yaml.

Changes since v7:
- Rebase 

Changes since v8:
- Redefine new-source-frs-typec-current as string enums to address
  Rob Herring's comment.

Changes since v9:
- Removed FRS constants from usb bindings.
---
 .../bindings/connector/usb-connector.yaml     | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 9bd52e63c935..d9f65e81065e 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -142,6 +142,32 @@  properties:
     required:
       - port@0
 
+  new-source-frs-typec-current:
+    description: Initial current capability of the new source when vSafe5V
+      is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
+      of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
+      different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
+      provides a detailed description of the field. The sink PDO from current source
+      reflects the current source's(i.e. transmitter of the FRS signal) power
+      requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
+      a.k.a new source, should check if it will be able to satisfy the current source's,
+      new sink's, requirement during frswap before enabling the frs signal reception.
+      This property refers to maximum current capability that the current sink can
+      satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
+      contract, hence, the power level is only a function of the current capability.
+      "not-supported" implies sink to source fast role swap not supported.
+      "default" refers to default USB power level as described by
+      "Table 6-14 Fixed Supply PDO - Sink".
+      "1.5A" refers to 1.5A@5V.
+      "3.0A" refers to 3.0A@5V.
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - not-supported
+      - default
+      - 1.5A
+      - 3.0A
+
 required:
   - compatible