diff mbox series

[5.7,091/393] net: phy: mscc: restore the base page in vsc8514/8584_config_init

Message ID 20200817143824.041999464@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Aug. 17, 2020, 3:12 p.m. UTC
From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 6119dda34e5d0821959e37641b287576826b6378 ]

In the vsc8584_config_init and vsc8514_config_init, the base page is set
to 'GPIO', configuration is done, and the page is never explicitly
restored to the standard page. No bug was triggered as it turns out
helpers called in those config_init functions do modify the base page,
and set it back to standard. But that is dangerous and any modification
to those functions would introduce bugs. This patch fixes this, to
improve maintenance, by restoring the base page to 'standard' once
'GPIO' accesses are completed.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mscc/mscc_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 485a4f8a6a9a6..95bd2d277ba42 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1413,6 +1413,11 @@  static int vsc8584_config_init(struct phy_device *phydev)
 	if (ret)
 		goto err;
 
+	ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+			     MSCC_PHY_PAGE_STANDARD);
+	if (ret)
+		goto err;
+
 	if (!phy_interface_is_rgmii(phydev)) {
 		val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
 			PROC_CMD_READ_MOD_WRITE_PORT;
@@ -1799,7 +1804,11 @@  static int vsc8514_config_init(struct phy_device *phydev)
 	val &= ~MAC_CFG_MASK;
 	val |= MAC_CFG_QSGMII;
 	ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
+	if (ret)
+		goto err;
 
+	ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+			     MSCC_PHY_PAGE_STANDARD);
 	if (ret)
 		goto err;