@@ -17,6 +17,8 @@ Required properties:
- "nvidia,tegra194-sdhci": for Tegra194
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
+ Must also contain "tmclk" entry for Tegra210, Tegra186, and Tegra194.
+ Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@@ -99,7 +101,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
Example:
sdhci@700b0000 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +117,22 @@ sdhci@700b0000 {
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};
+
+sdhci@700b0000 {
+ compatible = "nvidia,tegra210-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ status = "disabled";
+};
Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout. So, this patch adds "tmclk" to Tegra sdhci clock property in the device tree binding. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> --- .../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 +++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)