@@ -5,6 +5,7 @@ Required properties:
- compatible: may be compatible = "mediatek,mt7530"
or compatible = "mediatek,mt7621"
+ or compatible = "mediatek,mt7531"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,13 @@ Required properties for the child nodes within ports container:
- reg: Port address described must be 6 for CPU port and from 0 to 5 for
user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
- "cpu".
+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
+ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+ must be either "trgmii" or "rgmii"
+ If compatible mediatek,mt7531 is set,
+ must be either "sgmii", "1000base-x" or "2500base-x"
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
1. GMAC5: GMAC5 can interface with another external MAC or PHY.
2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
of the SOC. Used in many setups where port 0/4 becomes the WAN port.
@@ -308,3 +312,64 @@ Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
};
};
};
+
+Example 4: MT7531BE port6 -- up-clocked 2.5Gbps SGMII -- MT7622 CPU 1st GMAC
+
+ð {
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ &mdio0 {
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+ };
+ };
+ };
+ };