diff mbox series

[v3,1/4] net: dsa: microchip: Make switch detection more informative

Message ID 20200909100417.380011-2-pbarker@konsulko.com
State New
Headers show
Series [v3,1/4] net: dsa: microchip: Make switch detection more informative | expand

Commit Message

Paul Barker Sept. 9, 2020, 10:04 a.m. UTC
To make switch detection more informative print the result of the
ksz9477/ksz9893 compatibility check. With debug output enabled also
print the contents of the Chip ID registers as a 40-bit hex string.

As this detection is the first communication with the switch performed
by the driver, making it easy to see any errors here will help identify
issues with SPI data corruption or reset sequencing.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/microchip/ksz9477.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 3cb22d149813..df5ecd0261fa 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1426,10 +1426,12 @@  static int ksz9477_switch_detect(struct ksz_device *dev)
 	/* Default capability is gigabit capable. */
 	dev->features = GBIT_SUPPORT;
 
+	dev_dbg(dev->dev, "Switch detect: ID=%08x%02x\n", id32, data8);
 	id_hi = (u8)(id32 >> 16);
 	id_lo = (u8)(id32 >> 8);
 	if ((id_lo & 0xf) == 3) {
 		/* Chip is from KSZ9893 design. */
+		dev_info(dev->dev, "Found KSZ9893\n");
 		dev->features |= IS_9893;
 
 		/* Chip does not support gigabit. */
@@ -1438,6 +1440,7 @@  static int ksz9477_switch_detect(struct ksz_device *dev)
 		dev->mib_port_cnt = 3;
 		dev->phy_port_cnt = 2;
 	} else {
+		dev_info(dev->dev, "Found KSZ9477 or compatible\n");
 		/* Chip uses new XMII register definitions. */
 		dev->features |= NEW_XMII;