diff mbox series

[13/20] can: flexcan: flexcan_set_bittiming(): move setup of CAN-2.0 bitiming into separate function

Message ID 20200923085418.2685858-14-mkl@pengutronix.de
State New
Headers show
Series None | expand

Commit Message

Marc Kleine-Budde Sept. 23, 2020, 8:54 a.m. UTC 
This is a patch prepares for the CAN-FD support. In a later patch the
setup for canfd bittiming will be added, with this patch the change is
easier to read.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200922144429.2613631-14-mkl@pengutronix.de
---
 drivers/net/can/flexcan.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 35d0fa59e957..a9908deae411 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1037,7 +1037,7 @@  static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	return handled;
 }
 
-static void flexcan_set_bittiming(struct net_device *dev)
+static void flexcan_set_bittiming_ctrl(const struct net_device *dev)
 {
 	const struct flexcan_priv *priv = netdev_priv(dev);
 	const struct can_bittiming *bt = &priv->can.bittiming;
@@ -1049,10 +1049,7 @@  static void flexcan_set_bittiming(struct net_device *dev)
 		 FLEXCAN_CTRL_RJW(0x3) |
 		 FLEXCAN_CTRL_PSEG1(0x7) |
 		 FLEXCAN_CTRL_PSEG2(0x7) |
-		 FLEXCAN_CTRL_PROPSEG(0x7) |
-		 FLEXCAN_CTRL_LPB |
-		 FLEXCAN_CTRL_SMP |
-		 FLEXCAN_CTRL_LOM);
+		 FLEXCAN_CTRL_PROPSEG(0x7));
 
 	reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
 		FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
@@ -1060,6 +1057,24 @@  static void flexcan_set_bittiming(struct net_device *dev)
 		FLEXCAN_CTRL_RJW(bt->sjw - 1) |
 		FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
 
+	netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
+	priv->write(reg, &regs->ctrl);
+
+	/* print chip status */
+	netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
+		   priv->read(&regs->mcr), priv->read(&regs->ctrl));
+}
+
+static void flexcan_set_bittiming(struct net_device *dev)
+{
+	const struct flexcan_priv *priv = netdev_priv(dev);
+	struct flexcan_regs __iomem *regs = priv->regs;
+	u32 reg;
+
+	reg = priv->read(&regs->ctrl);
+	reg &= ~(FLEXCAN_CTRL_LPB | FLEXCAN_CTRL_SMP |
+		 FLEXCAN_CTRL_LOM);
+
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
 		reg |= FLEXCAN_CTRL_LPB;
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
@@ -1070,9 +1085,7 @@  static void flexcan_set_bittiming(struct net_device *dev)
 	netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
 	priv->write(reg, &regs->ctrl);
 
-	/* print chip status */
-	netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
-		   priv->read(&regs->mcr), priv->read(&regs->ctrl));
+	return flexcan_set_bittiming_ctrl(dev);
 }
 
 /* flexcan_chip_start