diff mbox series

[24/35] net: brcmfmac: Replace in_interrupt()

Message ID 20200927194922.245750969@linutronix.de
State Superseded
Headers show
Series net: in_interrupt() cleanup and fixes | expand

Commit Message

Thomas Gleixner Sept. 27, 2020, 7:49 p.m. UTC
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called
from a interrupt service routine or from a worker thread.

Passing such information from the calling context is preferred and
requested by Linus, so add an argument `in_isr' to brcmf_sdio_isr() and let
the callers pass the information about the calling context.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |    4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   |    4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   |    2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

Comments

Arend van Spriel Sept. 28, 2020, 7:35 a.m. UTC | #1
+ Uffe

On 9/27/2020 9:49 PM, Thomas Gleixner wrote:
> @@ -85,7 +85,7 @@ static void brcmf_sdiod_ib_irqhandler(st
>   
>   	brcmf_dbg(INTR, "IB intr triggered\n");
>   
> -	brcmf_sdio_isr(sdiodev->bus);
> +	brcmf_sdio_isr(sdiodev->bus, false);
>   }

Hi Uffe,

I assume the above code is okay, but want to confirm. Is the SDIO 
interrupt guaranteed to be on a worker thread?

Thanks,
Arend
Ulf Hansson Sept. 28, 2020, 9:19 a.m. UTC | #2
On Mon, 28 Sep 2020 at 09:35, Arend Van Spriel
<arend.vanspriel@broadcom.com> wrote:
>
> + Uffe
>
> On 9/27/2020 9:49 PM, Thomas Gleixner wrote:
> > @@ -85,7 +85,7 @@ static void brcmf_sdiod_ib_irqhandler(st
> >
> >       brcmf_dbg(INTR, "IB intr triggered\n");
> >
> > -     brcmf_sdio_isr(sdiodev->bus);
> > +     brcmf_sdio_isr(sdiodev->bus, false);
> >   }
>
> Hi Uffe,
>
> I assume the above code is okay, but want to confirm. Is the SDIO
> interrupt guaranteed to be on a worker thread?

Correct.

As a matter of fact, the sdio irqs can be delivered through a couple
of different paths. The legacy (scheduled for removal), is from a
dedicated kthread. The more "modern" way is either from the context of
a threaded IRQ handler or via a workqueue.

However, there are also so-called out of band SDIO irqs, typically
routed via a separate GPIO line. This isn't managed by the MMC/SDIO
subsystem, but the SDIO functional driver itself.

Kind regards
Uffe
Arend van Spriel Sept. 28, 2020, 9:37 a.m. UTC | #3
On 9/28/2020 11:19 AM, Ulf Hansson wrote:
> On Mon, 28 Sep 2020 at 09:35, Arend Van Spriel
> <arend.vanspriel@broadcom.com> wrote:
>>
>> + Uffe
>>
>> On 9/27/2020 9:49 PM, Thomas Gleixner wrote:
>>> @@ -85,7 +85,7 @@ static void brcmf_sdiod_ib_irqhandler(st
>>>
>>>        brcmf_dbg(INTR, "IB intr triggered\n");
>>>
>>> -     brcmf_sdio_isr(sdiodev->bus);
>>> +     brcmf_sdio_isr(sdiodev->bus, false);
>>>    }
>>
>> Hi Uffe,
>>
>> I assume the above code is okay, but want to confirm. Is the SDIO
>> interrupt guaranteed to be on a worker thread?
> 
> Correct.
> 
> As a matter of fact, the sdio irqs can be delivered through a couple
> of different paths. The legacy (scheduled for removal), is from a
> dedicated kthread. The more "modern" way is either from the context of
> a threaded IRQ handler or via a workqueue.
> 
> However, there are also so-called out of band SDIO irqs, typically
> routed via a separate GPIO line. This isn't managed by the MMC/SDIO
> subsystem, but the SDIO functional driver itself.

In brcmfmac we indeed support the out-of-band interrupt. That scnenario 
is also taken care of in this patch. Thanks for the confirmation.

Regards,
Arend
Arend van Spriel Sept. 28, 2020, 9:40 a.m. UTC | #4
On 9/27/2020 9:49 PM, Thomas Gleixner wrote:
> From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> 
> brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called
> from a interrupt service routine or from a worker thread.
> 
> Passing such information from the calling context is preferred and
> requested by Linus, so add an argument `in_isr' to brcmf_sdio_isr() and let
> the callers pass the information about the calling context.

After getting confirmation here is my ...

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
> Cc: Franky Lin <franky.lin@broadcom.com>
> Cc: Hante Meuleman <hante.meuleman@broadcom.com>
> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
> Cc: Wright Feng <wright.feng@cypress.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: brcm80211-dev-list.pdl@broadcom.com
> Cc: brcm80211-dev-list@cypress.com
> Cc: netdev@vger.kernel.org
> ---
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |    4 ++--
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   |    4 ++--
>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h   |    2 +-
>   3 files changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -73,7 +73,7 @@  static irqreturn_t brcmf_sdiod_oob_irqha
 		sdiodev->irq_en = false;
 	}
 
-	brcmf_sdio_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus, true);
 
 	return IRQ_HANDLED;
 }
@@ -85,7 +85,7 @@  static void brcmf_sdiod_ib_irqhandler(st
 
 	brcmf_dbg(INTR, "IB intr triggered\n");
 
-	brcmf_sdio_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus, false);
 }
 
 /* dummy handler for SDIO function 2 interrupt */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3625,7 +3625,7 @@  void brcmf_sdio_trigger_dpc(struct brcmf
 	}
 }
 
-void brcmf_sdio_isr(struct brcmf_sdio *bus)
+void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3636,7 +3636,7 @@  void brcmf_sdio_isr(struct brcmf_sdio *b
 
 	/* Count the interrupt call */
 	bus->sdcnt.intrcount++;
-	if (in_interrupt())
+	if (in_isr)
 		atomic_set(&bus->ipend, 1);
 	else
 		if (brcmf_sdio_intr_rstatus(bus)) {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -372,7 +372,7 @@  int brcmf_sdiod_remove(struct brcmf_sdio
 
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdio_remove(struct brcmf_sdio *bus);
-void brcmf_sdio_isr(struct brcmf_sdio *bus);
+void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr);
 
 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active);
 void brcmf_sdio_wowl_config(struct device *dev, bool enabled);