deleted file mode 100644
@@ -1,49 +0,0 @@
-Samsung micro-USB 11-pin connector
-==================================
-
-Samsung micro-USB 11-pin connector is an extension of micro-USB connector.
-It is present in multiple Samsung mobile devices.
-It has additional pins to route MHL traffic simultanously with USB.
-
-The bindings are superset of usb-connector bindings for micro-USB connector[1].
-
-Required properties:
-- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector",
-- type: must be "micro".
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
- specified in bindings/graph.txt, unless the bus is between parent node and
- the connector. Since single connector can have multpile data buses every bus
- has assigned OF graph port number as follows:
- 0: High Speed (HS),
- 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
-
-[1]: bindings/connector/usb-connector.yaml
-
-Example
--------
-
-Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines
-connected to HDMI-MHL bridge (sii8620):
-
-muic-max77843@66 {
- ...
- usb_con: connector {
- compatible = "samsung,usb-connector-11pin", "usb-b-connector";
- label = "micro-USB";
- type = "micro";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@3 {
- reg = <3>;
- usb_con_mhl: endpoint {
- remote-endpoint = <&sii8620_mhl>;
- };
- };
- };
- };
-};
@@ -25,6 +25,10 @@ properties:
- const: gpio-usb-b-connector
- const: usb-b-connector
+ - items:
+ - const: samsung,usb-connector-11pin
+ - const: usb-b-connector
+
label:
description: Symbolic name for the connector.
@@ -158,6 +162,16 @@ allOf:
- required:
- id-gpios
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,usb-connector-11pin
+ then:
+ properties:
+ type:
+ const: micro
+
examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
- |
@@ -233,3 +247,33 @@ examples:
vbus-supply = <&usb_p0_vbus>;
};
};
+
+ # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
+ # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based
+ # mobile phone
+ - |
+ muic-max77843 {
+ usb_con4: connector {
+ compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ usb_con_mhl: endpoint {
+ remote-endpoint = <&sii8620_mhl>;
+ };
+ };
+ };
+ };
+ };
Add Samsung 11-pin USB-C connector into standard dtschema bindings file. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../connector/samsung,usb-connector-11pin.txt | 49 ------------------- .../bindings/connector/usb-connector.yaml | 44 +++++++++++++++++ 2 files changed, 44 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt