diff mbox series

[08/13] ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250

Message ID 20200901075417.22481-9-krzk@kernel.org
State New
Headers show
Series ARM: dts: exynos: dtschema cleanups for Exynos5 | expand

Commit Message

Krzysztof Kozlowski Sept. 1, 2020, 7:54 a.m. UTC 
Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used
later in the S3C RTC node. Except making the S3C RTC working, this also
fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
  arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 5c42df024adf..00af7fb65080 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,6 +7,7 @@ 
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
@@ -129,13 +130,14 @@ 
 		reg = <0x50>;
 	};
 
-	max77686@9 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
+		#clock-cells = <1>;
 		wakeup-source;
 
 		voltage-regulators {
@@ -368,6 +370,8 @@ 
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sata {