@@ -67,9 +67,9 @@ patternProperties:
compatible:
items:
- enum:
- - arm,integrator-ap-syscon
- - arm,integrator-cp-syscon
- - arm,integrator-sp-syscon
+ - arm,integrator-ap-syscon
+ - arm,integrator-cp-syscon
+ - arm,integrator-sp-syscon
- const: syscon
reg:
maxItems: 1
@@ -55,20 +55,20 @@ properties:
compatible:
oneOf:
- items:
- - const: arm,realview-eb-soc
- - const: simple-bus
+ - const: arm,realview-eb-soc
+ - const: simple-bus
- items:
- - const: arm,realview-pb1176-soc
- - const: simple-bus
+ - const: arm,realview-pb1176-soc
+ - const: simple-bus
- items:
- - const: arm,realview-pb11mp-soc
- - const: simple-bus
+ - const: arm,realview-pb11mp-soc
+ - const: simple-bus
- items:
- - const: arm,realview-pba8-soc
- - const: simple-bus
+ - const: arm,realview-pba8-soc
+ - const: simple-bus
- items:
- - const: arm,realview-pbx-soc
- - const: simple-bus
+ - const: arm,realview-pbx-soc
+ - const: simple-bus
patternProperties:
"^.*syscon@[0-9a-f]+$":
@@ -79,35 +79,35 @@ properties:
compatible:
oneOf:
- items:
- - const: arm,realview-eb11mp-revb-syscon
- - const: arm,realview-eb-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-eb11mp-revb-syscon
+ - const: arm,realview-eb-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-eb11mp-revc-syscon
- - const: arm,realview-eb-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-eb11mp-revc-syscon
+ - const: arm,realview-eb-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-eb-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-eb-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-pb1176-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-pb1176-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-pb11mp-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-pb11mp-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-pba8-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-pba8-syscon
+ - const: syscon
+ - const: simple-mfd
- items:
- - const: arm,realview-pbx-syscon
- - const: syscon
- - const: simple-mfd
+ - const: arm,realview-pbx-syscon
+ - const: syscon
+ - const: simple-mfd
required:
- compatible
@@ -165,10 +165,10 @@ patternProperties:
compatible:
oneOf:
- items:
- - enum:
- - arm,vexpress,v2m-p1
- - arm,vexpress,v2p-p1
- - const: simple-bus
+ - enum:
+ - arm,vexpress,v2m-p1
+ - arm,vexpress,v2p-p1
+ - const: simple-bus
- const: simple-bus
motherboard:
type: object
@@ -186,8 +186,8 @@ patternProperties:
compatible:
items:
- enum:
- - arm,vexpress,v2m-p1
- - arm,vexpress,v2p-p1
+ - arm,vexpress,v2m-p1
+ - arm,vexpress,v2p-p1
- const: simple-bus
arm,v2m-memory-map:
description: This describes the memory map type.
@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm28155-ap
+ - brcm,bcm28155-ap
- const: brcm,bcm11351
...
@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm21664-garnet
+ - brcm,bcm21664-garnet
- const: brcm,bcm21664
...
@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm23550-sparrow
+ - brcm,bcm23550-sparrow
- const: brcm,bcm23550
...
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom Cygnus device tree bindings
maintainers:
- - Ray Jui <rjui@broadcom.com>
- - Scott Branden <sbranden@broadcom.com>
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
properties:
$nodename:
@@ -16,14 +16,14 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm11300
- - brcm,bcm11320
- - brcm,bcm11350
- - brcm,bcm11360
- - brcm,bcm58300
- - brcm,bcm58302
- - brcm,bcm58303
- - brcm,bcm58305
+ - brcm,bcm11300
+ - brcm,bcm11320
+ - brcm,bcm11350
+ - brcm,bcm11360
+ - brcm,bcm58300
+ - brcm,bcm58302
+ - brcm,bcm58303
+ - brcm,bcm58305
- const: brcm,cygnus
...
@@ -21,7 +21,7 @@ properties:
compatible:
items:
- enum:
- - ubnt,unifi-switch8
+ - ubnt,unifi-switch8
- const: brcm,bcm53342
- const: brcm,hr2
@@ -16,8 +16,8 @@ properties:
compatible:
items:
- enum:
- - brcm,ns2-svk
- - brcm,ns2-xmc
+ - brcm,ns2-svk
+ - brcm,ns2-xmc
- const: brcm,ns2
...
@@ -24,13 +24,13 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm58522
- - brcm,bcm58525
- - brcm,bcm58535
- - brcm,bcm58622
- - brcm,bcm58623
- - brcm,bcm58625
- - brcm,bcm88312
+ - brcm,bcm58522
+ - brcm,bcm58525
+ - brcm,bcm58535
+ - brcm,bcm58622
+ - brcm,bcm58623
+ - brcm,bcm58625
+ - brcm,bcm88312
- const: brcm,nsp
...
@@ -16,9 +16,9 @@ properties:
compatible:
items:
- enum:
- - brcm,bcm958742k
- - brcm,bcm958742t
- - brcm,bcm958802a802x
+ - brcm,bcm958742k
+ - brcm,bcm958742t
+ - brcm,bcm958802a802x
- const: brcm,stingray
...
@@ -15,8 +15,8 @@ properties:
compatible:
items:
- enum:
- - brcm,vulcan-eval
- - cavium,thunderx2-cn9900
+ - brcm,vulcan-eval
+ - cavium,thunderx2-cn9900
- const: brcm,vulcan-soc
...
@@ -82,12 +82,12 @@ properties:
compatible:
oneOf:
- items:
- - const: arm,coresight-cti
- - const: arm,primecell
+ - const: arm,coresight-cti
+ - const: arm,primecell
- items:
- - const: arm,coresight-cti-v8-arch
- - const: arm,coresight-cti
- - const: arm,primecell
+ - const: arm,coresight-cti-v8-arch
+ - const: arm,coresight-cti
+ - const: arm,primecell
reg:
maxItems: 1
@@ -191,16 +191,16 @@ patternProperties:
anyOf:
- required:
- - arm,trig-in-sigs
+ - arm,trig-in-sigs
- required:
- - arm,trig-out-sigs
+ - arm,trig-out-sigs
oneOf:
- required:
- - arm,trig-conn-name
+ - arm,trig-conn-name
- required:
- - cpu
+ - cpu
- required:
- - arm,cs-dev-assoc
+ - arm,cs-dev-assoc
required:
- reg
@@ -330,8 +330,8 @@ if:
- enable-method
then:
- required:
- - secondary-boot-reg
+ required:
+ - secondary-boot-reg
required:
- device_type
@@ -273,8 +273,8 @@ properties:
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- kontron,imx6ull-n6411-som # Kontron N6411 SOM
- myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
- - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
- - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
+ - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
+ - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
- description: Kontron N6411 S Board
@@ -312,9 +312,12 @@ properties:
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
- - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
- - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
- - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
+ - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
+ # Aster Carrier Board
+ - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
+ # Colibri Evaluation Board V3
+ - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
+ # Colibri Evaluation Board V3
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board
@@ -14,6 +14,6 @@ properties:
compatible:
items:
- enum:
- - intel,keembay-evm
+ - intel,keembay-evm
- const: intel,keembay
...
@@ -17,22 +17,22 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - mediatek,mt2701-pericfg
- - mediatek,mt2712-pericfg
- - mediatek,mt6765-pericfg
- - mediatek,mt7622-pericfg
- - mediatek,mt7629-pericfg
- - mediatek,mt8135-pericfg
- - mediatek,mt8173-pericfg
- - mediatek,mt8183-pericfg
- - mediatek,mt8516-pericfg
- - const: syscon
+ - enum:
+ - mediatek,mt2701-pericfg
+ - mediatek,mt2712-pericfg
+ - mediatek,mt6765-pericfg
+ - mediatek,mt7622-pericfg
+ - mediatek,mt7629-pericfg
+ - mediatek,mt8135-pericfg
+ - mediatek,mt8173-pericfg
+ - mediatek,mt8183-pericfg
+ - mediatek,mt8516-pericfg
+ - const: syscon
- items:
- # Special case for mt7623 for backward compatibility
- - const: mediatek,mt7623-pericfg
- - const: mediatek,mt2701-pericfg
- - const: syscon
+ # Special case for mt7623 for backward compatibility
+ - const: mediatek,mt7623-pericfg
+ - const: mediatek,mt2701-pericfg
+ - const: syscon
reg:
maxItems: 1
@@ -19,7 +19,7 @@ description: |
reported to the APB terminator (APB Errors Handler Block).
allOf:
- - $ref: /schemas/simple-bus.yaml#
+ - $ref: /schemas/simple-bus.yaml#
properties:
compatible:
@@ -23,7 +23,7 @@ description: |
accessible by means of the Baikal-T1 System Controller.
allOf:
- - $ref: /schemas/simple-bus.yaml#
+ - $ref: /schemas/simple-bus.yaml#
properties:
compatible:
@@ -95,10 +95,10 @@ allOf:
# Devices without builtin crystal
properties:
clock-names:
- minItems: 1
- maxItems: 2
- items:
- enum: [ xin, clkin ]
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ xin, clkin ]
clocks:
minItems: 1
maxItems: 2
@@ -47,12 +47,12 @@ properties:
compatible:
items:
- enum:
- - ingenic,jz4740-cgu
- - ingenic,jz4725b-cgu
- - ingenic,jz4770-cgu
- - ingenic,jz4780-cgu
- - ingenic,x1000-cgu
- - ingenic,x1830-cgu
+ - ingenic,jz4740-cgu
+ - ingenic,jz4725b-cgu
+ - ingenic,jz4770-cgu
+ - ingenic,jz4780-cgu
+ - ingenic,x1000-cgu
+ - ingenic,x1830-cgu
- const: simple-mfd
minItems: 1
@@ -68,8 +68,8 @@ properties:
items:
- const: ext
- enum:
- - rtc
- - osc32k # Different name, same clock
+ - rtc
+ - osc32k # Different name, same clock
assigned-clocks:
minItems: 1
@@ -65,7 +65,7 @@ properties:
protected-clocks:
description:
- Protected clock specifier list as per common clock binding
+ Protected clock specifier list as per common clock binding
vdd-gfx-supply:
description:
@@ -24,9 +24,9 @@ properties:
- const: renesas,r8a7778-cpg-clocks # R-Car M1
- const: renesas,r8a7779-cpg-clocks # R-Car H1
- items:
- - enum:
- - renesas,r7s72100-cpg-clocks # RZ/A1H
- - const: renesas,rz-cpg-clocks # RZ/A1
+ - enum:
+ - renesas,r7s72100-cpg-clocks # RZ/A1H
+ - const: renesas,rz-cpg-clocks # RZ/A1
- const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
reg:
@@ -16,7 +16,7 @@ properties:
"#clock-cells":
const: 1
- compatible :
+ compatible:
enum:
- sprd,sc9863a-ap-clk
- sprd,sc9863a-aon-clk
@@ -162,14 +162,13 @@ required:
additionalProperties: false
examples:
- - |
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/imx8mq-reset.h>
- #include <dt-bindings/clock/imx8mq-clock.h>
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/reset/imx8mq-reset.h>
-
- mipi_dsi: mipi_dsi@30a00000 {
+ mipi_dsi: mipi_dsi@30a00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-nwl-dsi";
@@ -224,4 +223,4 @@ examples:
};
};
};
- };
+ };
@@ -119,17 +119,17 @@ then:
# The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
# These clocks are optional.
- enum:
- - extal
- - dclkin.0
- - dclkin.1
+ - extal
+ - dclkin.0
+ - dclkin.1
- enum:
- - extal
- - dclkin.0
- - dclkin.1
+ - extal
+ - dclkin.0
+ - dclkin.1
- enum:
- - extal
- - dclkin.0
- - dclkin.1
+ - extal
+ - dclkin.0
+ - dclkin.1
required:
- clock-names
@@ -18,16 +18,16 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - ti,ths8134a
- - ti,ths8134b
- - const: ti,ths8134
+ - enum:
+ - ti,ths8134a
+ - ti,ths8134b
+ - const: ti,ths8134
- enum:
- - adi,adv7123
- - dumb-vga-dac
- - ti,opa362
- - ti,ths8134
- - ti,ths8135
+ - adi,adv7123
+ - dumb-vga-dac
+ - ti,opa362
+ - ti,ths8134
+ - ti,ths8135
ports:
type: object
@@ -55,11 +55,11 @@ patternProperties:
clock-master:
type: boolean
description:
- Should be enabled if the host is being used in conjunction with
- another DSI host to drive the same peripheral. Hardware supporting
- such a configuration generally requires the data on both the busses
- to be driven by the same clock. Only the DSI host instance
- controlling this clock should contain this property.
+ Should be enabled if the host is being used in conjunction with
+ another DSI host to drive the same peripheral. Hardware supporting
+ such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance
+ controlling this clock should contain this property.
enforce-video-mode:
type: boolean
@@ -21,9 +21,9 @@ properties:
items:
- enum:
# Waveshare 3.5" 320x480 Color TFT LCD
- - waveshare,rpi-lcd-35
+ - waveshare,rpi-lcd-35
# Ozzmaker 3.5" 320x480 Color TFT LCD
- - ozzmaker,piscreen
+ - ozzmaker,piscreen
- const: ilitek,ili9486
spi-max-frequency:
@@ -13,11 +13,11 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4725b-ipu
- - ingenic,jz4760-ipu
+ - ingenic,jz4725b-ipu
+ - ingenic,jz4760-ipu
- items:
- - const: ingenic,jz4770-ipu
- - const: ingenic,jz4760-ipu
+ - const: ingenic,jz4770-ipu
+ - const: ingenic,jz4760-ipu
reg:
maxItems: 1
@@ -58,11 +58,11 @@ properties:
- port@0
required:
- - compatible
- - reg
- - interrupts
- - clocks
- - clock-names
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
if:
properties:
@@ -38,10 +38,10 @@ properties:
clocks:
items:
- - description: GMU clock
- - description: GPU CX clock
- - description: GPU AXI clock
- - description: GPU MEMNOC clock
+ - description: GMU clock
+ - description: GPU CX clock
+ - description: GPU AXI clock
+ - description: GPU MEMNOC clock
clock-names:
items:
@@ -52,8 +52,8 @@ properties:
interrupts:
items:
- - description: GMU HFI interrupt
- - description: GMU interrupt
+ - description: GMU HFI interrupt
+ - description: GMU interrupt
interrupt-names:
@@ -62,14 +62,14 @@ properties:
- const: gmu
power-domains:
- items:
- - description: CX power domain
- - description: GX power domain
+ items:
+ - description: CX power domain
+ - description: GX power domain
power-domain-names:
- items:
- - const: cx
- - const: gx
+ items:
+ - const: cx
+ - const: gx
iommus:
maxItems: 1
@@ -90,13 +90,13 @@ required:
- operating-points-v2
examples:
- - |
- #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
- #include <dt-bindings/clock/qcom,gcc-sdm845.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
+ - |
+ #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
- gmu: gmu@506a000 {
+ gmu: gmu@506a000 {
compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0x506a000 0x30000>,
@@ -120,4 +120,4 @@ examples:
iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>;
- };
+ };
@@ -24,9 +24,9 @@ properties:
reg: true
reset-gpios: true
vdd-supply:
- description: core voltage supply
+ description: core voltage supply
vddio-supply:
- description: vddio supply
+ description: vddio supply
required:
- compatible
@@ -48,12 +48,12 @@ properties:
port: true
required:
- - compatible
- - reg
- - enable-gpios
- - pp1800-supply
- - avdd-supply
- - avee-supply
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
additionalProperties: false
@@ -19,9 +19,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
- description: regulator that supplies the iovcc voltage
+ description: regulator that supplies the iovcc voltage
vdd-supply:
- description: regulator that supplies the vdd voltage
+ description: regulator that supplies the vdd voltage
required:
- compatible
@@ -19,11 +19,11 @@ properties:
backlight: true
reset-gpios: true
avdd-supply:
- description: regulator that supplies the AVDD voltage
+ description: regulator that supplies the AVDD voltage
dvdd-supply:
- description: regulator that supplies the DVDD voltage
+ description: regulator that supplies the DVDD voltage
cvdd-supply:
- description: regulator that supplies the CVDD voltage
+ description: regulator that supplies the CVDD voltage
required:
- compatible
@@ -25,8 +25,7 @@ properties:
compatible:
items:
- enum:
- - dlink,dir-685-panel
-
+ - dlink,dir-685-panel
- const: ilitek,ili9322
reset-gpios: true
@@ -13,8 +13,7 @@ properties:
compatible:
items:
- enum:
- - bananapi,lhr050h41
-
+ - bananapi,lhr050h41
- const: ilitek,ili9881c
backlight: true
@@ -21,9 +21,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
- description: regulator that supplies the iovcc voltage
+ description: regulator that supplies the iovcc voltage
vci-supply:
- description: regulator that supplies the vci voltage
+ description: regulator that supplies the vci voltage
required:
- compatible
@@ -19,9 +19,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
- description: regulator that supplies the iovcc voltage
+ description: regulator that supplies the iovcc voltage
vcc-supply:
- description: regulator that supplies the vcc voltage
+ description: regulator that supplies the vcc voltage
required:
- compatible
@@ -25,9 +25,9 @@ properties:
reg: true
reset-gpios: true
vdd-supply:
- description: regulator that supplies the vdd voltage
+ description: regulator that supplies the vdd voltage
vddi-supply:
- description: regulator that supplies the vddi voltage
+ description: regulator that supplies the vddi voltage
backlight: true
required:
@@ -27,10 +27,10 @@ properties:
compatible:
items:
- enum:
- - motorola,droid4-panel # Panel from Motorola Droid4 phone
- - nokia,himalaya # Panel from Nokia N950 phone
- - tpo,taal # Panel from OMAP4 SDP board
- - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
+ - motorola,droid4-panel # Panel from Motorola Droid4 phone
+ - nokia,himalaya # Panel from Nokia N950 phone
+ - tpo,taal # Panel from OMAP4 SDP board
+ - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
reg:
maxItems: 1
@@ -59,7 +59,7 @@ description: |
properties:
clock-frequency:
- description: Panel clock in Hz
+ description: Panel clock in Hz
hactive:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -200,15 +200,15 @@ properties:
description: Enable double clock mode
required:
- - clock-frequency
- - hactive
- - vactive
- - hfront-porch
- - hback-porch
- - hsync-len
- - vfront-porch
- - vback-porch
- - vsync-len
+ - clock-frequency
+ - hactive
+ - vactive
+ - hfront-porch
+ - hback-porch
+ - hsync-len
+ - vfront-porch
+ - vback-porch
+ - vsync-len
additionalProperties: false
@@ -10,8 +10,8 @@ maintainers:
- Philippe CORNU <philippe.cornu@st.com>
description: |
- The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
- panel connected using a MIPI-DSI video interface.
+ The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+ panel connected using a MIPI-DSI video interface.
allOf:
- $ref: panel-common.yaml#
@@ -18,9 +18,9 @@ properties:
reg: true
reset-gpios: true
vdd3-supply:
- description: core voltage supply
+ description: core voltage supply
vci-supply:
- description: voltage supply for analog circuits
+ description: voltage supply for analog circuits
required:
- compatible
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Visionox model RM69299 Panels Device Tree Bindings.
maintainers:
- - Harigovindan P <harigovi@codeaurora.org>
+ - Harigovindan P <harigovi@codeaurora.org>
description: |
This binding is for display panels using a Visionox RM692999 panel.
@@ -45,7 +45,7 @@ properties:
phy-dsi-supply:
description:
- Phandle of the regulator that provides the supply voltage.
+ Phandle of the regulator that provides the supply voltage.
ports:
type: object
@@ -147,4 +147,3 @@ examples:
...
-
@@ -78,7 +78,7 @@ properties:
- const: vp4
interrupts:
- items:
+ items:
- description: common_m DSS Master common
- description: common_s0 DSS Shared common 0
- description: common_s1 DSS Shared common 1
@@ -56,8 +56,8 @@ properties:
memory-region:
description:
- phandle to a node describing reserved memory (System RAM memory)
- used by DSP (see bindings/reserved-memory/reserved-memory.txt)
+ phandle to a node describing reserved memory (System RAM memory)
+ used by DSP (see bindings/reserved-memory/reserved-memory.txt)
maxItems: 1
required:
@@ -177,10 +177,10 @@ properties:
dependencies:
# 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
# is present
- vendor,bool-property: [ vendor,string-array-property ]
+ vendor,bool-property: [ 'vendor,string-array-property' ]
# Expressing 2 properties in both orders means all of the set of properties
# must be present or none of them.
- vendor,string-array-property: [ vendor,bool-property ]
+ vendor,string-array-property: [ 'vendor,bool-property' ]
required:
- compatible
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: IBM FSI-attached SPI controllers
maintainers:
- - Eddie James <eajames@linux.ibm.com>
+ - Eddie James <eajames@linux.ibm.com>
description: |
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
@@ -19,10 +19,8 @@ properties:
reg:
items:
- - description: the I/O address containing the GPIO controller
- registers.
- - description: the I/O address containing the Chip Common A interrupt
- registers.
+ - description: the I/O address containing the GPIO controller registers.
+ - description: the I/O address containing the Chip Common A interrupt registers.
gpio-controller: true
@@ -13,39 +13,39 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - renesas,gpio-r8a7778 # R-Car M1
- - renesas,gpio-r8a7779 # R-Car H1
- - const: renesas,rcar-gen1-gpio # R-Car Gen1
+ - enum:
+ - renesas,gpio-r8a7778 # R-Car M1
+ - renesas,gpio-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-gpio # R-Car Gen1
- items:
- - enum:
- - renesas,gpio-r8a7742 # RZ/G1H
- - renesas,gpio-r8a7743 # RZ/G1M
- - renesas,gpio-r8a7744 # RZ/G1N
- - renesas,gpio-r8a7745 # RZ/G1E
- - renesas,gpio-r8a77470 # RZ/G1C
- - renesas,gpio-r8a7790 # R-Car H2
- - renesas,gpio-r8a7791 # R-Car M2-W
- - renesas,gpio-r8a7792 # R-Car V2H
- - renesas,gpio-r8a7793 # R-Car M2-N
- - renesas,gpio-r8a7794 # R-Car E2
- - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+ - enum:
+ - renesas,gpio-r8a7742 # RZ/G1H
+ - renesas,gpio-r8a7743 # RZ/G1M
+ - renesas,gpio-r8a7744 # RZ/G1N
+ - renesas,gpio-r8a7745 # RZ/G1E
+ - renesas,gpio-r8a77470 # RZ/G1C
+ - renesas,gpio-r8a7790 # R-Car H2
+ - renesas,gpio-r8a7791 # R-Car M2-W
+ - renesas,gpio-r8a7792 # R-Car V2H
+ - renesas,gpio-r8a7793 # R-Car M2-N
+ - renesas,gpio-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
- items:
- - enum:
- - renesas,gpio-r8a774a1 # RZ/G2M
- - renesas,gpio-r8a774b1 # RZ/G2N
- - renesas,gpio-r8a774c0 # RZ/G2E
- - renesas,gpio-r8a7795 # R-Car H3
- - renesas,gpio-r8a7796 # R-Car M3-W
- - renesas,gpio-r8a77961 # R-Car M3-W+
- - renesas,gpio-r8a77965 # R-Car M3-N
- - renesas,gpio-r8a77970 # R-Car V3M
- - renesas,gpio-r8a77980 # R-Car V3H
- - renesas,gpio-r8a77990 # R-Car E3
- - renesas,gpio-r8a77995 # R-Car D3
- - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+ - enum:
+ - renesas,gpio-r8a774a1 # RZ/G2M
+ - renesas,gpio-r8a774b1 # RZ/G2N
+ - renesas,gpio-r8a774c0 # RZ/G2E
+ - renesas,gpio-r8a7795 # R-Car H3
+ - renesas,gpio-r8a7796 # R-Car M3-W
+ - renesas,gpio-r8a77961 # R-Car M3-W+
+ - renesas,gpio-r8a77965 # R-Car M3-N
+ - renesas,gpio-r8a77970 # R-Car V3M
+ - renesas,gpio-r8a77980 # R-Car V3H
+ - renesas,gpio-r8a77990 # R-Car E3
+ - renesas,gpio-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
reg:
maxItems: 1
@@ -26,7 +26,8 @@ properties:
- description: AXI/master interface clock
- description: GPU core clock
- description: Shader clock (only required if GPU has feature PIPE_3D)
- - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
+ - description: AHB/slave interface clock (only required if GPU can gate
+ slave interface independently)
minItems: 1
maxItems: 4
@@ -19,7 +19,7 @@ description: |+
properties:
compatible:
enum:
- - adi,axi-fan-control-1.00.a
+ - adi,axi-fan-control-1.00.a
reg:
maxItems: 1
@@ -20,22 +20,22 @@ properties:
- const: fsl,imx1-i2c
- items:
- enum:
- - fsl,imx25-i2c
- - fsl,imx27-i2c
- - fsl,imx31-i2c
- - fsl,imx50-i2c
- - fsl,imx51-i2c
- - fsl,imx53-i2c
- - fsl,imx6q-i2c
- - fsl,imx6sl-i2c
- - fsl,imx6sx-i2c
- - fsl,imx6sll-i2c
- - fsl,imx6ul-i2c
- - fsl,imx7s-i2c
- - fsl,imx8mq-i2c
- - fsl,imx8mm-i2c
- - fsl,imx8mn-i2c
- - fsl,imx8mp-i2c
+ - fsl,imx25-i2c
+ - fsl,imx27-i2c
+ - fsl,imx31-i2c
+ - fsl,imx50-i2c
+ - fsl,imx51-i2c
+ - fsl,imx53-i2c
+ - fsl,imx6q-i2c
+ - fsl,imx6sl-i2c
+ - fsl,imx6sx-i2c
+ - fsl,imx6sll-i2c
+ - fsl,imx6ul-i2c
+ - fsl,imx7s-i2c
+ - fsl,imx8mq-i2c
+ - fsl,imx8mm-i2c
+ - fsl,imx8mn-i2c
+ - fsl,imx8mp-i2c
- const: fsl,imx21-i2c
reg:
@@ -16,8 +16,8 @@ allOf:
required:
- mrvl,i2c-polling
then:
- required:
- - interrupts
+ required:
+ - interrupts
properties:
compatible:
@@ -53,10 +53,10 @@ properties:
standby-gpios:
description:
- Must be the device tree identifier of the STBY pin. This pin is used
- to place the AD7606 into one of two power-down modes, Standby mode or
- Shutdown mode. As the line is active low, it should be marked
- GPIO_ACTIVE_LOW.
+ Must be the device tree identifier of the STBY pin. This pin is used
+ to place the AD7606 into one of two power-down modes, Standby mode or
+ Shutdown mode. As the line is active low, it should be marked
+ GPIO_ACTIVE_LOW.
maxItems: 1
adi,first-data-gpios:
@@ -10,7 +10,7 @@ maintainers:
- Jonathan Cameron <jic23@kernel.org>
description: |
- Family of simple ADCs with i2c inteface and internal references.
+ Family of simple ADCs with i2c inteface and internal references.
properties:
compatible:
@@ -24,11 +24,11 @@ properties:
- const: qcom,spmi-adc-rev2
- items:
- - enum:
- - qcom,spmi-vadc
- - qcom,spmi-adc5
- - qcom,spmi-adc-rev2
- - qcom,spmi-adc7
+ - enum:
+ - qcom,spmi-vadc
+ - qcom,spmi-adc5
+ - qcom,spmi-adc-rev2
+ - qcom,spmi-adc7
reg:
description: VADC base address in the SPMI PMIC register map
@@ -101,12 +101,11 @@ patternProperties:
- $ref: /schemas/types.yaml#/definitions/uint32-array
oneOf:
- items:
- - const: 1
- - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
-
+ - const: 1
+ - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
- items:
- - const: 10
- - const: 81
+ - const: 10
+ - const: 81
qcom,ratiometric:
description: |
@@ -17,10 +17,10 @@ properties:
- const: rockchip,rk3399-saradc
- items:
- enum:
- - rockchip,px30-saradc
- - rockchip,rk3308-saradc
- - rockchip,rk3328-saradc
- - rockchip,rv1108-saradc
+ - rockchip,px30-saradc
+ - rockchip,rk3308-saradc
+ - rockchip,rk3328-saradc
+ - rockchip,rv1108-saradc
- const: rockchip,rk3399-saradc
reg:
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: HMC425A 6-bit Digital Step Attenuator
maintainers:
-- Michael Hennerich <michael.hennerich@analog.com>
-- Beniamin Bia <beniamin.bia@analog.com>
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Beniamin Bia <beniamin.bia@analog.com>
description: |
Digital Step Attenuator IIO device with gpio interface.
@@ -31,10 +31,10 @@ properties:
- atlas,co2-ezo
reg:
- maxItems: 1
+ maxItems: 1
interrupts:
- maxItems: 1
+ maxItems: 1
required:
- compatible
@@ -61,17 +61,17 @@ properties:
const: 0
adi,range-microamp:
- description: Output range of the channel.
- oneOf:
- - items:
- - const: 0
- - const: 300000
- - items:
- - const: -60000
- - const: 0
- - items:
- - const: -60000
- - const: 300000
+ description: Output range of the channel.
+ oneOf:
+ - items:
+ - const: 0
+ - const: 300000
+ - items:
+ - const: -60000
+ - const: 0
+ - items:
+ - const: -60000
+ - const: 300000
channel@1:
description: Represents an external channel which are
@@ -84,10 +84,10 @@ properties:
const: 1
adi,range-microamp:
- description: Output range of the channel.
- items:
- - const: 0
- - enum: [ 140000, 250000 ]
+ description: Output range of the channel.
+ items:
+ - const: 0
+ - enum: [140000, 250000]
channel@2:
description: Represents an external channel which are
@@ -100,10 +100,10 @@ properties:
const: 2
adi,range-microamp:
- description: Output range of the channel.
- items:
- - const: 0
- - enum: [ 55000, 150000 ]
+ description: Output range of the channel.
+ items:
+ - const: 0
+ - enum: [55000, 150000]
patternProperties:
"^channel@([3-5])$":
@@ -116,19 +116,19 @@ patternProperties:
maximum: 5
adi,range-microamp:
- description: Output range of the channel.
- items:
- - const: 0
- - enum: [ 45000, 100000 ]
+ description: Output range of the channel.
+ items:
+ - const: 0
+ - enum: [45000, 100000]
required:
-- reg
-- channel@0
-- channel@1
-- channel@2
-- channel@3
-- channel@4
-- channel@5
+ - reg
+ - channel@0
+ - channel@1
+ - channel@2
+ - channel@3
+ - channel@4
+ - channel@5
examples:
- |
@@ -36,15 +36,15 @@ required:
additionalProperties: false
examples:
-- |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- light-sensor@51 {
- compatible = "vishay,vcnl4200";
- reg = <0x51>;
- proximity-near-level = <220>;
- };
- };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@51 {
+ compatible = "vishay,vcnl4200";
+ reg = <0x51>;
+ proximity-near-level = <220>;
+ };
+ };
...
@@ -13,15 +13,15 @@ properties:
compatible:
oneOf:
- enum:
- - asahi-kasei,ak8975
- - asahi-kasei,ak8963
- - asahi-kasei,ak09911
- - asahi-kasei,ak09912
+ - asahi-kasei,ak8975
+ - asahi-kasei,ak8963
+ - asahi-kasei,ak09911
+ - asahi-kasei,ak09912
- enum:
- - ak8975
- - ak8963
- - ak09911
- - ak09912
+ - ak8975
+ - ak8963
+ - ak09911
+ - ak09912
deprecated: true
reg:
@@ -39,8 +39,8 @@ properties:
description:
The driver current for the LED used in proximity sensing.
enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
- 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
- 180000, 190000, 200000]
+ 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+ 180000, 190000, 200000]
default: 20000
required:
@@ -307,7 +307,7 @@ patternProperties:
mode.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
- 500000, 1000000]
+ 500000, 1000000]
adi,custom-thermistor:
description:
@@ -24,19 +24,19 @@ properties:
- const: fsl,imx21-kpp
- items:
- enum:
- - fsl,imx25-kpp
- - fsl,imx27-kpp
- - fsl,imx31-kpp
- - fsl,imx35-kpp
- - fsl,imx51-kpp
- - fsl,imx53-kpp
- - fsl,imx50-kpp
- - fsl,imx6q-kpp
- - fsl,imx6sx-kpp
- - fsl,imx6sl-kpp
- - fsl,imx6sll-kpp
- - fsl,imx6ul-kpp
- - fsl,imx7d-kpp
+ - fsl,imx25-kpp
+ - fsl,imx27-kpp
+ - fsl,imx31-kpp
+ - fsl,imx35-kpp
+ - fsl,imx51-kpp
+ - fsl,imx53-kpp
+ - fsl,imx50-kpp
+ - fsl,imx6q-kpp
+ - fsl,imx6sx-kpp
+ - fsl,imx6sl-kpp
+ - fsl,imx6sll-kpp
+ - fsl,imx6ul-kpp
+ - fsl,imx7d-kpp
- const: fsl,imx21-kpp
reg:
@@ -51,7 +51,7 @@ required:
- touchscreen-max-pressure
examples:
-- |
+ - |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
@@ -20,11 +20,11 @@ maintainers:
allOf:
- $ref: touchscreen.yaml#
- if:
- properties:
- compatible:
- contains:
- enum:
- - evervision,ev-ft5726
+ properties:
+ compatible:
+ contains:
+ enum:
+ - evervision,ev-ft5726
then:
properties:
@@ -35,9 +35,8 @@ properties:
maxItems: 1
irq-gpios:
- description: GPIO pin used for IRQ.
- The driver uses the interrupt gpio pin as
- output to reset the device.
+ description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+ as output to reset the device.
maxItems: 1
reset-gpios:
@@ -33,8 +33,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-min-pressure:
- description: minimum pressure on the touchscreen to be achieved in order for the
- touchscreen driver to report a touch event.
+ description: minimum pressure on the touchscreen to be achieved in order
+ for the touchscreen driver to report a touch event.
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-x:
@@ -46,13 +46,13 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-pressure:
- description: pressure noise value of the absolute input device (arbitrary range
- dependent on the controller)
+ description: pressure noise value of the absolute input device (arbitrary
+ range dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-average-samples:
- description: Number of data samples which are averaged for each read (valid values
- dependent on the controller)
+ description: Number of data samples which are averaged for each read (valid
+ values dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-inverted-x:
@@ -25,17 +25,17 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - fsl,imx8mn-nic
- - fsl,imx8mm-nic
- - fsl,imx8mq-nic
- - const: fsl,imx8m-nic
+ - enum:
+ - fsl,imx8mn-nic
+ - fsl,imx8mm-nic
+ - fsl,imx8mq-nic
+ - const: fsl,imx8m-nic
- items:
- - enum:
- - fsl,imx8mn-noc
- - fsl,imx8mm-noc
- - fsl,imx8mq-noc
- - const: fsl,imx8m-noc
+ - enum:
+ - fsl,imx8mn-noc
+ - fsl,imx8mm-noc
+ - fsl,imx8mq-noc
+ - const: fsl,imx8m-noc
- const: fsl,imx8m-nic
reg:
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm SC7180 Network-On-Chip Interconnect
+title: Qualcomm SC7180 Network-On-Chip Interconnect
maintainers:
- Odelu Kukatla <okukatla@codeaurora.org>
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm SDM845 Network-On-Chip Interconnect
+title: Qualcomm SDM845 Network-On-Chip Interconnect
maintainers:
- Georgi Djakov <georgi.djakov@linaro.org>
@@ -42,8 +42,8 @@ properties:
- items:
- const: arm,gic-400
- enum:
- - arm,cortex-a15-gic
- - arm,cortex-a7-gic
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
- items:
- const: arm,arm1176jzf-devchip-gic
@@ -16,20 +16,20 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-intc
- - ingenic,jz4760-intc
- - ingenic,jz4780-intc
+ - ingenic,jz4740-intc
+ - ingenic,jz4760-intc
+ - ingenic,jz4780-intc
- items:
- - enum:
- - ingenic,jz4775-intc
- - ingenic,jz4770-intc
- - const: ingenic,jz4760-intc
+ - enum:
+ - ingenic,jz4775-intc
+ - ingenic,jz4770-intc
+ - const: ingenic,jz4760-intc
- items:
- - const: ingenic,x1000-intc
- - const: ingenic,jz4780-intc
+ - const: ingenic,x1000-intc
+ - const: ingenic,jz4780-intc
- items:
- - const: ingenic,jz4725b-intc
- - const: ingenic,jz4740-intc
+ - const: ingenic,jz4725b-intc
+ - const: ingenic,jz4740-intc
"#interrupt-cells":
const: 1
@@ -79,7 +79,8 @@ properties:
description: |
kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+ enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
+ 2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
@@ -29,12 +29,12 @@ properties:
- const: fsl,imx8-mu-scu
- items:
- enum:
- - fsl,imx7s-mu
- - fsl,imx8mq-mu
- - fsl,imx8mm-mu
- - fsl,imx8mn-mu
- - fsl,imx8mp-mu
- - fsl,imx8qxp-mu
+ - fsl,imx7s-mu
+ - fsl,imx8mq-mu
+ - fsl,imx8mm-mu
+ - fsl,imx8mn-mu
+ - fsl,imx8mp-mu
+ - fsl,imx8qxp-mu
- const: fsl,imx6sx-mu
- description: To communicate with i.MX8 SCU with fast IPC
items:
@@ -24,7 +24,7 @@ properties:
compatible:
items:
- enum:
- - qcom,sm8250-ipcc
+ - qcom,sm8250-ipcc
- const: qcom,ipcc
reg:
@@ -20,8 +20,8 @@ properties:
oneOf:
- const: allwinner,sun8i-a83t-de2-rotate
- items:
- - const: allwinner,sun50i-a64-de2-rotate
- - const: allwinner,sun8i-a83t-de2-rotate
+ - const: allwinner,sun50i-a64-de2-rotate
+ - const: allwinner,sun8i-a83t-de2-rotate
reg:
maxItems: 1
@@ -20,8 +20,8 @@ properties:
oneOf:
- const: allwinner,sun8i-h3-deinterlace
- items:
- - const: allwinner,sun50i-a64-deinterlace
- - const: allwinner,sun8i-h3-deinterlace
+ - const: allwinner,sun50i-a64-deinterlace
+ - const: allwinner,sun8i-h3-deinterlace
reg:
maxItems: 1
@@ -17,17 +17,17 @@ properties:
compatible:
items:
- enum:
- - adi,adv7180
- - adi,adv7180cp
- - adi,adv7180st
- - adi,adv7182
- - adi,adv7280
- - adi,adv7280-m
- - adi,adv7281
- - adi,adv7281-m
- - adi,adv7281-ma
- - adi,adv7282
- - adi,adv7282-m
+ - adi,adv7180
+ - adi,adv7180cp
+ - adi,adv7180st
+ - adi,adv7182
+ - adi,adv7280
+ - adi,adv7280-m
+ - adi,adv7281
+ - adi,adv7281-m
+ - adi,adv7281-ma
+ - adi,adv7282
+ - adi,adv7282-m
reg:
maxItems: 1
@@ -58,17 +58,16 @@ allOf:
- if:
properties:
compatible:
- items:
- - enum:
- - adi,adv7180
- - adi,adv7182
- - adi,adv7280
- - adi,adv7280-m
- - adi,adv7281
- - adi,adv7281-m
- - adi,adv7281-ma
- - adi,adv7282
- - adi,adv7282-m
+ enum:
+ - adi,adv7180
+ - adi,adv7182
+ - adi,adv7280
+ - adi,adv7280-m
+ - adi,adv7281
+ - adi,adv7281-m
+ - adi,adv7281-ma
+ - adi,adv7282
+ - adi,adv7282-m
then:
required:
- port
@@ -5,7 +5,7 @@
$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
+title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
maintainers:
- Jacopo Mondi <jacopo+renesas@jmondi.org>
@@ -49,7 +49,7 @@ properties:
gpio-controller: true
'#gpio-cells':
- const: 2
+ const: 2
ports:
type: object
@@ -138,4 +138,5 @@ examples:
};
};
};
-...
\ No newline at end of file
+...
+
@@ -19,15 +19,15 @@ properties:
compatible:
items:
- enum:
- - renesas,r8a774a1-csi2 # RZ/G2M
- - renesas,r8a774b1-csi2 # RZ/G2N
- - renesas,r8a774c0-csi2 # RZ/G2E
- - renesas,r8a7795-csi2 # R-Car H3
- - renesas,r8a7796-csi2 # R-Car M3-W
- - renesas,r8a77965-csi2 # R-Car M3-N
- - renesas,r8a77970-csi2 # R-Car V3M
- - renesas,r8a77980-csi2 # R-Car V3H
- - renesas,r8a77990-csi2 # R-Car E3
+ - renesas,r8a774a1-csi2 # RZ/G2M
+ - renesas,r8a774b1-csi2 # RZ/G2N
+ - renesas,r8a774c0-csi2 # RZ/G2E
+ - renesas,r8a7795-csi2 # R-Car H3
+ - renesas,r8a7796-csi2 # R-Car M3-W
+ - renesas,r8a77965-csi2 # R-Car M3-N
+ - renesas,r8a77970-csi2 # R-Car V3M
+ - renesas,r8a77980-csi2 # R-Car V3H
+ - renesas,r8a77990-csi2 # R-Car E3
reg:
maxItems: 1
@@ -31,8 +31,8 @@ properties:
oneOf:
- const: vdpu
- items:
- - const: vepu
- - const: vdpu
+ - const: vepu
+ - const: vdpu
clocks:
maxItems: 2
@@ -25,7 +25,7 @@ properties:
compatible:
items:
- enum:
- - xlnx,mipi-csi2-rx-subsystem-5.0
+ - xlnx,mipi-csi2-rx-subsystem-5.0
reg:
maxItems: 1
@@ -65,13 +65,12 @@ properties:
0x2d - RAW14
0x2e - RAW16
0x2f - RAW20
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - anyOf:
- - minimum: 0x1e
- - maximum: 0x24
- - minimum: 0x28
- - maximum: 0x2f
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - minimum: 0x1e
+ maximum: 0x24
+ - minimum: 0x28
+ maximum: 0x2f
xlnx,vfb:
type: boolean
@@ -15,12 +15,12 @@ properties:
- const: fsl,imx6q-mmdc
- items:
- enum:
- - fsl,imx6qp-mmdc
- - fsl,imx6sl-mmdc
- - fsl,imx6sll-mmdc
- - fsl,imx6sx-mmdc
- - fsl,imx6ul-mmdc
- - fsl,imx7ulp-mmdc
+ - fsl,imx6qp-mmdc
+ - fsl,imx6sl-mmdc
+ - fsl,imx6sll-mmdc
+ - fsl,imx6sx-mmdc
+ - fsl,imx6ul-mmdc
+ - fsl,imx7ulp-mmdc
- const: fsl,imx6q-mmdc
reg:
@@ -16,11 +16,11 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-nemc
- - ingenic,jz4780-nemc
+ - ingenic,jz4740-nemc
+ - ingenic,jz4780-nemc
- items:
- - const: ingenic,jz4725b-nemc
- - const: ingenic,jz4740-nemc
+ - const: ingenic,jz4725b-nemc
+ - const: ingenic,jz4740-nemc
"#address-cells":
const: 2
@@ -26,10 +26,10 @@ properties:
compatible:
items:
- enum:
- - renesas,r8a77970-rpc-if # R-Car V3M
- - renesas,r8a77980-rpc-if # R-Car V3H
- - renesas,r8a77995-rpc-if # R-Car D3
- - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+ - renesas,r8a77970-rpc-if # R-Car V3M
+ - renesas,r8a77980-rpc-if # R-Car V3H
+ - renesas,r8a77995-rpc-if # R-Car D3
+ - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
reg:
items:
@@ -98,11 +98,11 @@ allOf:
description:
Databus power supply.
- if:
- properties:
- compatible:
- contains:
- enum:
- - cirrus,cs47l15
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l15
then:
required:
- MICVDD-supply
@@ -174,24 +174,24 @@ properties:
"mclk3" For the clock supplied on MCLK3.
oneOf:
- items:
- - const: mclk1
+ - const: mclk1
- items:
- - const: mclk2
+ - const: mclk2
- items:
- - const: mclk3
+ - const: mclk3
- items:
- - const: mclk1
- - const: mclk2
+ - const: mclk1
+ - const: mclk2
- items:
- - const: mclk1
- - const: mclk3
+ - const: mclk1
+ - const: mclk3
- items:
- - const: mclk2
- - const: mclk3
+ - const: mclk2
+ - const: mclk3
- items:
- - const: mclk1
- - const: mclk2
- - const: mclk3
+ - const: mclk1
+ - const: mclk2
+ - const: mclk3
AVDD-supply:
description:
@@ -89,8 +89,8 @@ properties:
description: Values of resistors for divider on raw ADC input
maxItems: 2
items:
- minimum: 1000
- maximum: 1000000
+ minimum: 1000
+ maximum: 1000000
gw,voltage-offset-microvolt:
description: |
@@ -113,8 +113,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -135,8 +135,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -154,8 +154,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -172,8 +172,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -198,8 +198,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -220,8 +220,8 @@ properties:
maxItems: 1
st,mask-reset:
- description: mask reset for this regulator,
- the regulator configuration is maintained during pmic reset.
+ description: mask reset for this regulator, the regulator configuration
+ is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
@@ -24,12 +24,11 @@ maintainers:
properties:
compatible:
- anyOf:
- - items:
- - enum:
- - ti,j721e-system-controller
- - const: syscon
- - const: simple-mfd
+ items:
+ - enum:
+ - ti,j721e-system-controller
+ - const: syscon
+ - const: simple-mfd
"#address-cells":
const: 1
@@ -73,13 +73,13 @@ allOf:
required:
- DBVDD3-supply
- if:
- properties:
- compatible:
- contains:
- enum:
- - cirrus,cs47l24
- - wlf,wm1831
- - wlf,wm8997
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1831
+ - wlf,wm8997
then:
properties:
SPKVDD-supply:
@@ -183,12 +183,12 @@ properties:
clock supplied on MCLK2, recommended to be an always on 32k clock.
oneOf:
- items:
- - const: mclk1
+ - const: mclk1
- items:
- - const: mclk2
+ - const: mclk2
- items:
- - const: mclk1
- - const: mclk2
+ - const: mclk1
+ - const: mclk2
reset-gpios:
maxItems: 1
@@ -21,9 +21,9 @@ properties:
compatible:
items:
- enum:
- - amlogic,meson8-sdhc
- - amlogic,meson8b-sdhc
- - amlogic,meson8m2-sdhc
+ - amlogic,meson8-sdhc
+ - amlogic,meson8b-sdhc
+ - amlogic,meson8m2-sdhc
- const: amlogic,meson-mx-sdhc
reg:
@@ -16,14 +16,14 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-mmc
- - ingenic,jz4725b-mmc
- - ingenic,jz4760-mmc
- - ingenic,jz4780-mmc
- - ingenic,x1000-mmc
+ - ingenic,jz4740-mmc
+ - ingenic,jz4725b-mmc
+ - ingenic,jz4760-mmc
+ - ingenic,jz4780-mmc
+ - ingenic,x1000-mmc
- items:
- - const: ingenic,jz4770-mmc
- - const: ingenic,jz4760-mmc
+ - const: ingenic,jz4770-mmc
+ - const: ingenic,jz4760-mmc
reg:
maxItems: 1
@@ -130,9 +130,9 @@ then:
required:
- clock-names
description:
- The internal card detection logic that exists in these controllers is
- sectioned off to be run by a separate second clock source to allow
- the main core clock to be turned off to save power.
+ The internal card detection logic that exists in these controllers is
+ sectioned off to be run by a separate second clock source to allow
+ the main core clock to be turned off to save power.
unevaluatedProperties: false
@@ -14,12 +14,10 @@ maintainers:
properties:
compatible:
- oneOf:
- - items:
- - enum:
+ items:
+ - enum:
- xlnx,zynqmp-nand-controller
- - enum:
- - arasan,nfc-v3p10
+ - const: arasan,nfc-v3p10
reg:
maxItems: 1
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Freescale General-Purpose Media Interface (GPMI) binding
+title: Freescale General-Purpose Media Interface (GPMI) binding
maintainers:
- Han Xu <han.xu@nxp.com>
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Freescale's mxc_nand binding
+title: Freescale's mxc_nand binding
maintainers:
- Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
@@ -42,7 +42,7 @@ patternProperties:
const: 512
nand-ecc-strength:
- enum: [1, 4 ,8 ]
+ enum: [1, 4, 8]
allOf:
- $ref: "nand-controller.yaml#"
@@ -85,8 +85,8 @@ patternProperties:
oneOf:
- required:
- - ports
+ - ports
- required:
- - ethernet-ports
+ - ethernet-ports
...
@@ -43,7 +43,7 @@ description:
properties:
compatible:
- const: "qcom,sdm845-ipa"
+ const: "qcom,sdm845-ipa"
reg:
items:
@@ -64,7 +64,7 @@ properties:
maxItems: 1
clock-names:
- const: core
+ const: core
interrupts:
items:
@@ -96,8 +96,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem.
items:
- - description: Whether the "ipa-clock-enabled" state bit is valid
- - description: Whether the IPA clock is enabled (if valid)
+ - description: Whether the "ipa-clock-enabled" state bit is valid
+ - description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string-array
@@ -140,9 +140,9 @@ required:
oneOf:
- required:
- - modem-init
+ - modem-init
- required:
- - memory-region
+ - memory-region
examples:
- |
@@ -46,10 +46,10 @@ properties:
clock-names:
oneOf:
- items: # for Pro4
- - const: gio
- - const: ether
- - const: ether-gb
- - const: ether-phy
+ - const: gio
+ - const: ether
+ - const: ether-gb
+ - const: ether-phy
- const: ether # for others
resets:
@@ -59,8 +59,8 @@ properties:
reset-names:
oneOf:
- items: # for Pro4
- - const: gio
- - const: ether
+ - const: gio
+ - const: ether
- const: ether # for others
socionext,syscon-phy-mode:
@@ -48,11 +48,11 @@ properties:
minItems: 3
maxItems: 5
items:
- - description: GMAC main clock
- - description: MAC TX clock
- - description: MAC RX clock
- - description: For MPU family, used for power mode
- - description: For MPU family, used for PHY without quartz
+ - description: GMAC main clock
+ - description: MAC TX clock
+ - description: MAC RX clock
+ - description: For MPU family, used for power mode
+ - description: For MPU family, used for PHY without quartz
clock-names:
minItems: 3
@@ -89,7 +89,7 @@ required:
- st,syscon
examples:
- - |
+ - |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
@@ -35,7 +35,7 @@ properties:
reg:
maxItems: 1
description:
- The physical base address and size of full the CPSW module IO range
+ The physical base address and size of full the CPSW module IO range
'#address-cells':
const: 1
@@ -85,36 +85,36 @@ properties:
patternProperties:
"^port@[0-9]+$":
- type: object
- description: CPSW external ports
-
- allOf:
- - $ref: ethernet-controller.yaml#
-
- properties:
- reg:
- items:
- - enum: [1, 2]
- description: CPSW port number
-
- phys:
- maxItems: 1
- description: phandle on phy-gmii-sel PHY
-
- label:
- description: label associated with this port
-
- ti,dual-emac-pvid:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
- maximum: 1024
- description:
- Specifies default PORT VID to be used to segregate
- ports. Default value - CPSW port number.
-
- required:
- - reg
- - phys
+ type: object
+ description: CPSW external ports
+
+ allOf:
+ - $ref: ethernet-controller.yaml#
+
+ properties:
+ reg:
+ items:
+ - enum: [1, 2]
+ description: CPSW port number
+
+ phys:
+ maxItems: 1
+ description: phandle on phy-gmii-sel PHY
+
+ label:
+ description: label associated with this port
+
+ ti,dual-emac-pvid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 1024
+ description:
+ Specifies default PORT VID to be used to segregate
+ ports. Default value - CPSW port number.
+
+ required:
+ - reg
+ - phys
cpts:
type: object
@@ -55,7 +55,7 @@ properties:
reg:
maxItems: 1
description:
- The physical base address and size of full the CPSW2G NUSS IO range
+ The physical base address and size of full the CPSW2G NUSS IO range
reg-names:
items:
@@ -100,38 +100,38 @@ properties:
patternProperties:
port@1:
- type: object
- description: CPSW2G NUSS external ports
-
- $ref: ethernet-controller.yaml#
-
- properties:
- reg:
- items:
- - const: 1
- description: CPSW port number
-
- phys:
- maxItems: 1
- description: phandle on phy-gmii-sel PHY
-
- label:
- description: label associated with this port
-
- ti,mac-only:
- $ref: /schemas/types.yaml#definitions/flag
- description:
- Specifies the port works in mac-only mode.
-
- ti,syscon-efuse:
- $ref: /schemas/types.yaml#definitions/phandle-array
- description:
- Phandle to the system control device node which provides access
- to efuse IO range with MAC addresses
-
- required:
- - reg
- - phys
+ type: object
+ description: CPSW2G NUSS external ports
+
+ $ref: ethernet-controller.yaml#
+
+ properties:
+ reg:
+ items:
+ - const: 1
+ description: CPSW port number
+
+ phys:
+ maxItems: 1
+ description: phandle on phy-gmii-sel PHY
+
+ label:
+ description: label associated with this port
+
+ ti,mac-only:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Specifies the port works in mac-only mode.
+
+ ti,syscon-efuse:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description:
+ Phandle to the system control device node which provides access
+ to efuse IO range with MAC addresses
+
+ required:
+ - reg
+ - phys
additionalProperties: false
@@ -21,18 +21,18 @@ properties:
compatible:
items:
- enum:
- - fsl,imx6q-ocotp
- - fsl,imx6sl-ocotp
- - fsl,imx6sx-ocotp
- - fsl,imx6ul-ocotp
- - fsl,imx6ull-ocotp
- - fsl,imx7d-ocotp
- - fsl,imx6sll-ocotp
- - fsl,imx7ulp-ocotp
- - fsl,imx8mq-ocotp
- - fsl,imx8mm-ocotp
- - fsl,imx8mn-ocotp
- - fsl,imx8mp-ocotp
+ - fsl,imx6q-ocotp
+ - fsl,imx6sl-ocotp
+ - fsl,imx6sx-ocotp
+ - fsl,imx6ul-ocotp
+ - fsl,imx6ull-ocotp
+ - fsl,imx7d-ocotp
+ - fsl,imx6sll-ocotp
+ - fsl,imx7ulp-ocotp
+ - fsl,imx8mq-ocotp
+ - fsl,imx8mm-ocotp
+ - fsl,imx8mn-ocotp
+ - fsl,imx8mp-ocotp
- const: syscon
reg:
@@ -46,8 +46,8 @@ properties:
const: 1
required:
- - compatible
- - reg
+ - compatible
+ - reg
examples:
- |
@@ -37,9 +37,9 @@ properties:
const: 0
phy-supply:
- description:
- Phandle to a regulator that provides power to the PHY. This
- regulator will be managed during the PHY power on/off sequence.
+ description:
+ Phandle to a regulator that provides power to the PHY. This
+ regulator will be managed during the PHY power on/off sequence.
required:
- compatible
@@ -100,9 +100,9 @@ properties:
- const: linestate
- const: otg-mux
- items:
- - const: otg-bvalid
- - const: otg-id
- - const: linestate
+ - const: otg-bvalid
+ - const: otg-id
+ - const: linestate
phy-supply:
description:
@@ -37,7 +37,7 @@ properties:
- description: Address and length of PHY's common serdes block.
"#clock-cells":
- enum: [ 1, 2 ]
+ enum: [ 1, 2 ]
"#address-cells":
enum: [ 1, 2 ]
@@ -65,16 +65,15 @@ properties:
vdda-phy-supply:
description:
- Phandle to a regulator supply to PHY core block.
+ Phandle to a regulator supply to PHY core block.
vdda-pll-supply:
description:
- Phandle to 1.8V regulator supply to PHY refclk pll block.
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply:
description:
- Phandle to a regulator supply to any specific refclk
- pll block.
+ Phandle to a regulator supply to any specific refclk pll block.
#Required nodes:
patternProperties:
@@ -184,8 +183,8 @@ allOf:
- description: phy common block reset.
reset-names:
items:
- - const: phy
- - const: common
+ - const: phy
+ - const: common
- if:
properties:
compatible:
@@ -26,7 +26,7 @@ properties:
- const: dp_com
"#clock-cells":
- enum: [ 1, 2 ]
+ enum: [ 1, 2 ]
"#address-cells":
enum: [ 1, 2 ]
@@ -62,16 +62,15 @@ properties:
vdda-phy-supply:
description:
- Phandle to a regulator supply to PHY core block.
+ Phandle to a regulator supply to PHY core block.
vdda-pll-supply:
description:
- Phandle to 1.8V regulator supply to PHY refclk pll block.
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply:
description:
- Phandle to a regulator supply to any specific refclk
- pll block.
+ Phandle to a regulator supply to any specific refclk pll block.
#Required nodes:
patternProperties:
@@ -17,15 +17,15 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - qcom,ipq8074-qusb2-phy
- - qcom,msm8996-qusb2-phy
- - qcom,msm8998-qusb2-phy
+ - enum:
+ - qcom,ipq8074-qusb2-phy
+ - qcom,msm8996-qusb2-phy
+ - qcom,msm8998-qusb2-phy
- items:
- - enum:
- - qcom,sc7180-qusb2-phy
- - qcom,sdm845-qusb2-phy
- - const: qcom,qusb2-v2-phy
+ - enum:
+ - qcom,sc7180-qusb2-phy
+ - qcom,sdm845-qusb2-phy
+ - const: qcom,qusb2-v2-phy
reg:
maxItems: 1
@@ -49,12 +49,12 @@ properties:
- const: iface
vdda-pll-supply:
- description:
- Phandle to 1.8V regulator supply to PHY refclk pll block.
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
vdda-phy-dpdm-supply:
- description:
- Phandle to 3.1V regulator supply to Dp/Dm port signals.
+ description:
+ Phandle to 3.1V regulator supply to Dp/Dm port signals.
resets:
maxItems: 1
@@ -64,12 +64,12 @@ properties:
nvmem-cells:
maxItems: 1
description:
- Phandle to nvmem cell that contains 'HS Tx trim'
- tuning parameter value for qusb2 phy.
+ Phandle to nvmem cell that contains 'HS Tx trim'
+ tuning parameter value for qusb2 phy.
qcom,tcsr-syscon:
description:
- Phandle to TCSR syscon register region.
+ Phandle to TCSR syscon register region.
$ref: /schemas/types.yaml#/definitions/phandle
if:
@@ -33,8 +33,8 @@ properties:
clock-names:
oneOf:
- items: # for Pro5
- - const: gio
- - const: link
+ - const: gio
+ - const: link
- const: link # for others
resets:
@@ -44,8 +44,8 @@ properties:
reset-names:
oneOf:
- items: # for Pro5
- - const: gio
- - const: link
+ - const: gio
+ - const: link
- const: link # for others
socionext,syscon:
@@ -37,12 +37,12 @@ properties:
oneOf:
- const: link # for PXs2
- items: # for PXs3 with phy-ext
- - const: link
- - const: phy
- - const: phy-ext
+ - const: link
+ - const: phy
+ - const: phy-ext
- items: # for others
- - const: link
- - const: phy
+ - const: link
+ - const: phy
resets:
maxItems: 2
@@ -37,15 +37,15 @@ properties:
clock-names:
oneOf:
- items: # for Pro4, Pro5
- - const: gio
- - const: link
+ - const: gio
+ - const: link
- items: # for PXs3 with phy-ext
- - const: link
- - const: phy
- - const: phy-ext
+ - const: link
+ - const: phy
+ - const: phy-ext
- items: # for others
- - const: link
- - const: phy
+ - const: link
+ - const: phy
resets:
maxItems: 2
@@ -53,11 +53,11 @@ properties:
reset-names:
oneOf:
- items: # for Pro4,Pro5
- - const: gio
- - const: link
+ - const: gio
+ - const: link
- items: # for others
- - const: link
- - const: phy
+ - const: link
+ - const: phy
vbus-supply:
description: A phandle to the regulator for USB VBUS
@@ -203,7 +203,8 @@ examples:
};
refclk-dig {
- clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+ <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&k3_clks 292 11>;
@@ -34,22 +34,22 @@ patternProperties:
patternProperties:
"^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string"
- enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
- ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
- EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
- GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
- I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
- MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
- NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
- NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
- PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
- RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
- RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
- SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
- SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
- SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
- TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
- VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+ enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+ GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+ I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+ MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+ NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+ NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+ RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+ SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+ SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+ TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+ VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
required:
- compatible
@@ -43,24 +43,24 @@ patternProperties:
patternProperties:
"^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string"
- enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
- ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
- ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
- GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
- I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
- LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
- MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
- NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
- NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
- PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
- RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
- SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
- SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
- SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
- SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
- TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
- USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
- VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+ enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+ GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+ LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+ MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+ NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+ NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+ SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+ SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+ SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+ TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+ USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+ VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
required:
- compatible
@@ -31,57 +31,57 @@ patternProperties:
properties:
function:
$ref: "/schemas/types.yaml#/definitions/string"
- enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
- ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
- FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
- GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
- GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
- I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
- I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
- MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
- NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
- NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
- NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
- PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
- PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
- RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
- SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
- SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
- SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
- SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
- TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
- THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
- UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
- USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
+ enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+ FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+ GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+ GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+ I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+ I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+ MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+ NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+ NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+ NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+ PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+ PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+ SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+ SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
+ SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+ SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+ TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+ THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+ UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+ USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
groups:
$ref: "/schemas/types.yaml#/definitions/string"
- enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
- ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
- EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
- GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
- GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
- I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
- I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
- LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
- MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
- NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
- NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
- OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
- PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
- PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
- QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
- RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
- SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
- SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
- SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
- SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
- SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
- TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
- TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
- TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
- UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
- WDTRST3, WDTRST4]
+ enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+ EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+ GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+ GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+ I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+ LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+ MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+ NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+ NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+ OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+ PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+ PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+ QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+ SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+ SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+ SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+ SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
+ SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+ TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+ TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+ TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+ UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+ WDTRST3, WDTRST4]
required:
- compatible
@@ -32,20 +32,20 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-pinctrl
- - ingenic,jz4725b-pinctrl
- - ingenic,jz4760-pinctrl
- - ingenic,jz4770-pinctrl
- - ingenic,jz4780-pinctrl
- - ingenic,x1000-pinctrl
- - ingenic,x1500-pinctrl
- - ingenic,x1830-pinctrl
+ - ingenic,jz4740-pinctrl
+ - ingenic,jz4725b-pinctrl
+ - ingenic,jz4760-pinctrl
+ - ingenic,jz4770-pinctrl
+ - ingenic,jz4780-pinctrl
+ - ingenic,x1000-pinctrl
+ - ingenic,x1500-pinctrl
+ - ingenic,x1830-pinctrl
- items:
- - const: ingenic,jz4760b-pinctrl
- - const: ingenic,jz4760-pinctrl
+ - const: ingenic,jz4760b-pinctrl
+ - const: ingenic,jz4760-pinctrl
- items:
- - const: ingenic,x1000e-pinctrl
- - const: ingenic,x1000-pinctrl
+ - const: ingenic,x1000e-pinctrl
+ - const: ingenic,x1000-pinctrl
reg:
maxItems: 1
@@ -60,8 +60,8 @@ patternProperties:
oneOf:
- pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
- sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
- qdsd_data3 ]
+ sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+ qdsd_data3 ]
minItems: 1
maxItems: 4
@@ -70,31 +70,31 @@ patternProperties:
Specify the alternative function to be configured for the specified
pins.
enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
- atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
- atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
- atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
- blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
- blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
- blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
- blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
- blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
- cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
- cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
- dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
- flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
- gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
- gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
- ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
- nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
- pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
- pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
- pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
- qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
- qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
- qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
- qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
- sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
- uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+ atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+ atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+ atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
+ blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
+ blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+ blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+ blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+ blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+ cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+ cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+ dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+ flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+ gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+ gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+ ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+ nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+ pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+ pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+ qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+ qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
+ sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
+ uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -76,22 +76,22 @@ patternProperties:
pins.
enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
- ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
- mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
- mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
- pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
- pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
- qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
- qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
- qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
- sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
- tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
- tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
- tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -48,8 +48,8 @@ properties:
st,package:
description:
- Indicates the SOC package used.
- More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
+ Indicates the SOC package used.
+ More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
@@ -58,13 +58,13 @@ properties:
power-domains:
description:
- A phandle and PM domain specifier as defined by bindings of the power
- controller specified by phandle. Some power domains might be powered
- from another power domain (or have other hardware specific
- dependencies). For representing such dependency a standard PM domain
- consumer binding is used. When provided, all domains created
- by the given provider should be subdomains of the domain specified
- by this binding.
+ A phandle and PM domain specifier as defined by bindings of the power
+ controller specified by phandle. Some power domains might be powered
+ from another power domain (or have other hardware specific
+ dependencies). For representing such dependency a standard PM domain
+ consumer binding is used. When provided, all domains created
+ by the given provider should be subdomains of the domain specified
+ by this binding.
required:
- "#power-domain-cells"
@@ -44,9 +44,9 @@ required:
anyOf:
- required:
- - gpios
+ - gpios
- required:
- - charge-status-gpios
+ - charge-status-gpios
additionalProperties: false
@@ -76,8 +76,7 @@ patternProperties:
"^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
description: List of regulators and its properties
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
additionalProperties: false
@@ -29,7 +29,7 @@ properties:
Short-circuit interrupt for lab.
required:
- - interrupts
+ - interrupts
ibb:
type: object
@@ -42,7 +42,7 @@ properties:
Short-circuit interrupt for lab.
required:
- - interrupts
+ - interrupts
required:
- compatible
@@ -118,16 +118,16 @@ else:
- const: l1dram
required:
- - compatible
- - reg
- - reg-names
- - ti,sci
- - ti,sci-dev-id
- - ti,sci-proc-ids
- - resets
- - firmware-name
- - mboxes
- - memory-region
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+ - mboxes
+ - memory-region
unevaluatedProperties: false
@@ -24,9 +24,9 @@ properties:
compatible:
items:
- enum:
- - fsl,imx7d-src
- - fsl,imx8mq-src
- - fsl,imx8mp-src
+ - fsl,imx7d-src
+ - fsl,imx8mq-src
+ - fsl,imx8mp-src
- const: syscon
reg:
@@ -16,16 +16,16 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-rtc
- - ingenic,jz4760-rtc
+ - ingenic,jz4740-rtc
+ - ingenic,jz4760-rtc
- items:
- - const: ingenic,jz4725b-rtc
- - const: ingenic,jz4740-rtc
+ - const: ingenic,jz4725b-rtc
+ - const: ingenic,jz4740-rtc
- items:
- - enum:
- - ingenic,jz4770-rtc
- - ingenic,jz4780-rtc
- - const: ingenic,jz4760-rtc
+ - enum:
+ - ingenic,jz4770-rtc
+ - ingenic,jz4780-rtc
+ - const: ingenic,jz4760-rtc
reg:
maxItems: 1
@@ -16,18 +16,18 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-uart
- - ingenic,jz4760-uart
- - ingenic,jz4780-uart
- - ingenic,x1000-uart
+ - ingenic,jz4740-uart
+ - ingenic,jz4760-uart
+ - ingenic,jz4780-uart
+ - ingenic,x1000-uart
- items:
- - enum:
- - ingenic,jz4770-uart
- - ingenic,jz4775-uart
- - const: ingenic,jz4760-uart
+ - enum:
+ - ingenic,jz4770-uart
+ - ingenic,jz4775-uart
+ - const: ingenic,jz4760-uart
- items:
- - const: ingenic,jz4725b-uart
- - const: ingenic,jz4740-uart
+ - const: ingenic,jz4725b-uart
+ - const: ingenic,jz4740-uart
reg:
maxItems: 1
@@ -97,13 +97,13 @@ allOf:
clock-names:
oneOf:
- items:
- - const: t0_clk
- - const: slow_clk
+ - const: t0_clk
+ - const: slow_clk
- items:
- - const: t0_clk
- - const: t1_clk
- - const: t2_clk
- - const: slow_clk
+ - const: t0_clk
+ - const: t1_clk
+ - const: t2_clk
+ - const: slow_clk
required:
- compatible
@@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: GENI Serial Engine QUP Wrapper Controller
maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
@@ -38,10 +38,10 @@ properties:
- description: Slave AHB Clock
"#address-cells":
- const: 2
+ const: 2
"#size-cells":
- const: 2
+ const: 2
ranges: true
@@ -79,15 +79,15 @@ patternProperties:
maxItems: 1
interconnects:
- minItems: 2
- maxItems: 3
+ minItems: 2
+ maxItems: 3
interconnect-names:
- minItems: 2
- items:
- - const: qup-core
- - const: qup-config
- - const: qup-memory
+ minItems: 2
+ items:
+ - const: qup-core
+ - const: qup-config
+ - const: qup-memory
required:
- reg
@@ -111,10 +111,10 @@ patternProperties:
maxItems: 1
"#address-cells":
- const: 1
+ const: 1
"#size-cells":
- const: 0
+ const: 0
required:
- compatible
@@ -136,10 +136,10 @@ patternProperties:
maxItems: 1
"#address-cells":
- const: 1
+ const: 1
"#size-cells":
- const: 0
+ const: 0
clock-frequency:
description: Desired I2C bus clock frequency in Hz.
@@ -19,12 +19,11 @@ properties:
compatible:
items:
- enum:
- - amlogic,aiu-gxbb
- - amlogic,aiu-gxl
- - amlogic,aiu-meson8
- - amlogic,aiu-meson8b
- - const:
- amlogic,aiu
+ - amlogic,aiu-gxbb
+ - amlogic,aiu-gxl
+ - amlogic,aiu-meson8
+ - amlogic,aiu-meson8b
+ - const: amlogic,aiu
clocks:
items:
@@ -19,13 +19,11 @@ properties:
compatible:
oneOf:
- items:
- - const:
- amlogic,g12a-toacodec
+ - const: amlogic,g12a-toacodec
- items:
- - enum:
- - amlogic,sm1-toacodec
- - const:
- amlogic,g12a-toacodec
+ - enum:
+ - amlogic,sm1-toacodec
+ - const: amlogic,g12a-toacodec
reg:
maxItems: 1
@@ -11,7 +11,7 @@ maintainers:
properties:
compatible:
- const: cirrus,cs42l51
+ const: cirrus,cs42l51
reg:
maxItems: 1
@@ -16,13 +16,13 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-i2s
- - ingenic,jz4760-i2s
- - ingenic,jz4770-i2s
- - ingenic,jz4780-i2s
+ - ingenic,jz4740-i2s
+ - ingenic,jz4760-i2s
+ - ingenic,jz4770-i2s
+ - ingenic,jz4780-i2s
- items:
- - const: ingenic,jz4725b-i2s
- - const: ingenic,jz4740-i2s
+ - const: ingenic,jz4725b-i2s
+ - const: ingenic,jz4740-i2s
'#sound-dai-cells':
const: 0
@@ -11,7 +11,7 @@ maintainers:
properties:
compatible:
- const: maxim,max98390
+ const: maxim,max98390
reg:
maxItems: 1
@@ -19,16 +19,16 @@ properties:
- const: rockchip,rk3066-i2s
- items:
- enum:
- - rockchip,px30-i2s
- - rockchip,rk3036-i2s
- - rockchip,rk3188-i2s
- - rockchip,rk3228-i2s
- - rockchip,rk3288-i2s
- - rockchip,rk3308-i2s
- - rockchip,rk3328-i2s
- - rockchip,rk3366-i2s
- - rockchip,rk3368-i2s
- - rockchip,rk3399-i2s
+ - rockchip,px30-i2s
+ - rockchip,rk3036-i2s
+ - rockchip,rk3188-i2s
+ - rockchip,rk3228-i2s
+ - rockchip,rk3288-i2s
+ - rockchip,rk3308-i2s
+ - rockchip,rk3328-i2s
+ - rockchip,rk3366-i2s
+ - rockchip,rk3368-i2s
+ - rockchip,rk3399-i2s
- const: rockchip,rk3066-i2s
reg:
@@ -55,8 +55,8 @@ properties:
oneOf:
- const: rx
- items:
- - const: tx
- - const: rx
+ - const: tx
+ - const: rx
power-domains:
maxItems: 1
@@ -25,8 +25,8 @@ properties:
- const: rockchip,rk3399-spdif
- items:
- enum:
- - rockchip,rk3188-spdif
- - rockchip,rk3288-spdif
+ - rockchip,rk3188-spdif
+ - rockchip,rk3288-spdif
- const: rockchip,rk3066-spdif
reg:
@@ -44,8 +44,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
description: Sets TDM RX capture edge.
enum:
- - 0 # Rising edge
- - 1 # Falling edge
+ - 0 # Rising edge
+ - 1 # Falling edge
'#sound-dai-cells':
const: 1
@@ -32,32 +32,32 @@ properties:
reg:
maxItems: 1
description: |
- I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+ I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
reset-gpios:
description: |
- GPIO used for hardware reset.
+ GPIO used for hardware reset.
areg-supply:
- description: |
- Regulator with AVDD at 3.3V. If not defined then the internal regulator
- is enabled.
+ description: |
+ Regulator with AVDD at 3.3V. If not defined then the internal regulator
+ is enabled.
ti,mic-bias-source:
description: |
- Indicates the source for MIC Bias.
- 0 - Mic bias is set to VREF
- 1 - Mic bias is set to VREF × 1.096
- 6 - Mic bias is set to AVDD
+ Indicates the source for MIC Bias.
+ 0 - Mic bias is set to VREF
+ 1 - Mic bias is set to VREF × 1.096
+ 6 - Mic bias is set to AVDD
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 6]
ti,vref-source:
description: |
- Indicates the source for MIC Bias.
- 0 - Set VREF to 2.75V
- 1 - Set VREF to 2.5V
- 2 - Set VREF to 1.375V
+ Indicates the source for MIC Bias.
+ 0 - Set VREF to 2.75V
+ 1 - Set VREF to 2.5V
+ 2 - Set VREF to 1.375V
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
@@ -109,7 +109,7 @@ properties:
default: [0, 0, 0, 0]
patternProperties:
- '^ti,gpo-config-[1-4]$':
+ '^ti,gpo-config-[1-4]$':
$ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Defines the configuration and output driver for the general purpose
@@ -22,10 +22,10 @@ properties:
- const: allwinner,sun6i-a31-spi
- const: allwinner,sun8i-h3-spi
- items:
- - enum:
- - allwinner,sun8i-r40-spi
- - allwinner,sun50i-h6-spi
- - const: allwinner,sun8i-h3-spi
+ - enum:
+ - allwinner,sun8i-r40-spi
+ - allwinner,sun50i-h6-spi
+ - const: allwinner,sun8i-h3-spi
reg:
maxItems: 1
@@ -23,19 +23,19 @@ properties:
- const: fsl,imx51-ecspi
- const: fsl,imx53-ecspi
- items:
- - enum:
- - fsl,imx50-ecspi
- - fsl,imx6q-ecspi
- - fsl,imx6sx-ecspi
- - fsl,imx6sl-ecspi
- - fsl,imx6sll-ecspi
- - fsl,imx6ul-ecspi
- - fsl,imx7d-ecspi
- - fsl,imx8mq-ecspi
- - fsl,imx8mm-ecspi
- - fsl,imx8mn-ecspi
- - fsl,imx8mp-ecspi
- - const: fsl,imx51-ecspi
+ - enum:
+ - fsl,imx50-ecspi
+ - fsl,imx6q-ecspi
+ - fsl,imx6sx-ecspi
+ - fsl,imx6sl-ecspi
+ - fsl,imx6sll-ecspi
+ - fsl,imx6ul-ecspi
+ - fsl,imx7d-ecspi
+ - fsl,imx8mq-ecspi
+ - fsl,imx8mm-ecspi
+ - fsl,imx8mn-ecspi
+ - fsl,imx8mp-ecspi
+ - const: fsl,imx51-ecspi
reg:
maxItems: 1
@@ -33,4 +33,5 @@ examples:
reg = <0x1f000000 0x10>;
};
-...
\ No newline at end of file
+...
+
@@ -43,47 +43,47 @@ properties:
maxItems: 1
required:
- - compatible
- - reg
- - spi-max-frequency
- - mux-controls
+ - compatible
+ - reg
+ - spi-max-frequency
+ - mux-controls
examples:
- - |
- #include <dt-bindings/gpio/gpio.h>
- mux: mux-controller {
- compatible = "gpio-mux";
- #mux-control-cells = <0>;
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
- mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
- };
+ mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
- spi {
- #address-cells = <1>;
- #size-cells = <0>;
- spi@0 {
- compatible = "spi-mux";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <100000000>;
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi@0 {
+ compatible = "spi-mux";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <100000000>;
- mux-controls = <&mux>;
+ mux-controls = <&mux>;
- spi-flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <40000000>;
- };
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <40000000>;
+ };
- spi-device@1 {
- compatible = "lineartechnology,ltc2488";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <10000000>;
- };
- };
- };
+ spi-device@1 {
+ compatible = "lineartechnology,ltc2488";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+ };
@@ -26,13 +26,13 @@ properties:
- const: rockchip,rv1108-spi
- items:
- enum:
- - rockchip,px30-spi
- - rockchip,rk3188-spi
- - rockchip,rk3288-spi
- - rockchip,rk3308-spi
- - rockchip,rk3328-spi
- - rockchip,rk3368-spi
- - rockchip,rk3399-spi
+ - rockchip,px30-spi
+ - rockchip,rk3188-spi
+ - rockchip,rk3288-spi
+ - rockchip,rk3308-spi
+ - rockchip,rk3328-spi
+ - rockchip,rk3368-spi
+ - rockchip,rk3399-spi
- const: rockchip,rk3066-spi
reg:
@@ -44,9 +44,9 @@ select: true
properties:
"#cooling-cells":
description:
- Must be 2, in order to specify minimum and maximum cooling state used in
- the cooling-maps reference. The first cell is the minimum cooling state
- and the second cell is the maximum cooling state requested.
+ Must be 2, in order to specify minimum and maximum cooling state used in
+ the cooling-maps reference. The first cell is the minimum cooling state
+ and the second cell is the maximum cooling state requested.
const: 2
examples:
@@ -18,29 +18,28 @@ description: |
This binding describes the thermal idle node.
properties:
- $nodename:
- const: thermal-idle
- description: |
- A thermal-idle node describes the idle cooling device properties to
- cool down efficiently the attached thermal zone.
-
- '#cooling-cells':
- const: 2
- description: |
- Must be 2, in order to specify minimum and maximum cooling state used in
- the cooling-maps reference. The first cell is the minimum cooling state
- and the second cell is the maximum cooling state requested.
-
- duration-us:
- description: |
- The idle duration in microsecond the device should cool down.
-
- exit-latency-us:
- description: |
- The exit latency constraint in microsecond for the injected
- idle state for the device. It is the latency constraint to
- apply when selecting an idle state from among all the present
- ones.
+ $nodename:
+ const: thermal-idle
+ description: |
+ A thermal-idle node describes the idle cooling device properties to
+ cool down efficiently the attached thermal zone.
+
+ '#cooling-cells':
+ const: 2
+ description: |
+ Must be 2, in order to specify minimum and maximum cooling state used in
+ the cooling-maps reference. The first cell is the minimum cooling state
+ and the second cell is the maximum cooling state requested.
+
+ duration-us:
+ description: |
+ The idle duration in microsecond the device should cool down.
+
+ exit-latency-us:
+ description: |
+ The exit latency constraint in microsecond for the injected idle state
+ for the device. It is the latency constraint to apply when selecting an
+ idle state from among all the present ones.
required:
- '#cooling-cells'
@@ -20,17 +20,17 @@ properties:
- const: fsl,imx31-gpt
- items:
- enum:
- - fsl,imx25-gpt
- - fsl,imx50-gpt
- - fsl,imx51-gpt
- - fsl,imx53-gpt
- - fsl,imx6q-gpt
+ - fsl,imx25-gpt
+ - fsl,imx50-gpt
+ - fsl,imx51-gpt
+ - fsl,imx53-gpt
+ - fsl,imx6q-gpt
- const: fsl,imx31-gpt
- const: fsl,imx6dl-gpt
- items:
- enum:
- - fsl,imx6sl-gpt
- - fsl,imx6sx-gpt
+ - fsl,imx6sl-gpt
+ - fsl,imx6sx-gpt
- const: fsl,imx6dl-gpt
reg:
@@ -49,16 +49,16 @@ properties:
compatible:
oneOf:
- items:
- - enum:
- - ingenic,jz4740-tcu
- - ingenic,jz4725b-tcu
- - ingenic,jz4770-tcu
- - ingenic,x1000-tcu
- - const: simple-mfd
+ - enum:
+ - ingenic,jz4740-tcu
+ - ingenic,jz4725b-tcu
+ - ingenic,jz4770-tcu
+ - ingenic,x1000-tcu
+ - const: simple-mfd
- items:
- - const: ingenic,jz4780-tcu
- - const: ingenic,jz4770-tcu
- - const: simple-mfd
+ - const: ingenic,jz4780-tcu
+ - const: ingenic,jz4770-tcu
+ - const: simple-mfd
reg:
maxItems: 1
@@ -113,13 +113,13 @@ patternProperties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-watchdog
- - ingenic,jz4780-watchdog
+ - ingenic,jz4740-watchdog
+ - ingenic,jz4780-watchdog
- items:
- - enum:
- - ingenic,jz4770-watchdog
- - ingenic,jz4725b-watchdog
- - const: ingenic,jz4740-watchdog
+ - enum:
+ - ingenic,jz4770-watchdog
+ - ingenic,jz4725b-watchdog
+ - const: ingenic,jz4740-watchdog
reg:
maxItems: 1
@@ -143,13 +143,13 @@ patternProperties:
compatible:
oneOf:
- enum:
- - ingenic,jz4740-pwm
- - ingenic,jz4725b-pwm
+ - ingenic,jz4740-pwm
+ - ingenic,jz4725b-pwm
- items:
- - enum:
- - ingenic,jz4770-pwm
- - ingenic,jz4780-pwm
- - const: ingenic,jz4740-pwm
+ - enum:
+ - ingenic,jz4770-pwm
+ - ingenic,jz4780-pwm
+ - const: ingenic,jz4740-pwm
reg:
maxItems: 1
@@ -182,11 +182,11 @@ patternProperties:
compatible:
oneOf:
- enum:
- - ingenic,jz4725b-ost
- - ingenic,jz4770-ost
+ - ingenic,jz4725b-ost
+ - ingenic,jz4770-ost
- items:
- - const: ingenic,jz4780-ost
- - const: ingenic,jz4770-ost
+ - const: ingenic,jz4780-ost
+ - const: ingenic,jz4770-ost
reg:
maxItems: 1
@@ -27,8 +27,8 @@ properties:
clocks:
minItems: 1
items:
- - description: Timer ticks reference clock source
- - description: APB interface clock source
+ - description: Timer ticks reference clock source
+ - description: APB interface clock source
clock-names:
minItems: 1
@@ -298,7 +298,7 @@ properties:
- national,lm80
# Temperature sensor with integrated fan control
- national,lm85
- # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+ # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
- national,lm92
# i2c trusted platform module (TPM)
- nuvoton,npct501
@@ -19,24 +19,24 @@ properties:
- const: snps,dwc2
- items:
- enum:
- - rockchip,px30-usb
- - rockchip,rk3036-usb
- - rockchip,rk3188-usb
- - rockchip,rk3228-usb
- - rockchip,rk3288-usb
- - rockchip,rk3328-usb
- - rockchip,rk3368-usb
- - rockchip,rv1108-usb
+ - rockchip,px30-usb
+ - rockchip,rk3036-usb
+ - rockchip,rk3188-usb
+ - rockchip,rk3228-usb
+ - rockchip,rk3288-usb
+ - rockchip,rk3328-usb
+ - rockchip,rk3368-usb
+ - rockchip,rv1108-usb
- const: rockchip,rk3066-usb
- const: snps,dwc2
- const: lantiq,arx100-usb
- const: lantiq,xrx200-usb
- items:
- enum:
- - amlogic,meson8-usb
- - amlogic,meson8b-usb
- - amlogic,meson-gxbb-usb
- - amlogic,meson-g12a-usb
+ - amlogic,meson8-usb
+ - amlogic,meson8b-usb
+ - amlogic,meson-gxbb-usb
+ - amlogic,meson-g12a-usb
- const: snps,dwc2
- const: amcc,dwc-otg
- const: snps,dwc2
@@ -116,12 +116,13 @@ properties:
snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag
- description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+ description: If present indicates that the phy needs to be left on for
+ remote wakeup during suspend.
snps,reset-phy-on-wake:
$ref: /schemas/types.yaml#/definitions/flag
- description: If present indicates that we need to reset the PHY when we detect a wakeup.
- This is due to a hardware errata.
+ description: If present indicates that we need to reset the PHY when we
+ detect a wakeup. This is due to a hardware errata.
required:
- compatible
@@ -80,7 +80,7 @@ properties:
companion:
$ref: /schemas/types.yaml#/definitions/phandle
description:
- Phandle of a companion.
+ Phandle of a companion.
phys:
description: PHY specifier for the USB PHY
@@ -16,11 +16,11 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4770-musb
- - ingenic,jz4740-musb
+ - ingenic,jz4770-musb
+ - ingenic,jz4740-musb
- items:
- - const: ingenic,jz4725b-musb
- - const: ingenic,jz4740-musb
+ - const: ingenic,jz4725b-musb
+ - const: ingenic,jz4740-musb
reg:
maxItems: 1
@@ -57,11 +57,11 @@ properties:
minItems: 4
maxItems: 5
items:
- - const: dev
- - const: ss
- - const: ss_src
- - const: fs_src
- - const: hs_src
+ - const: dev
+ - const: ss
+ - const: ss_src
+ - const: fs_src
+ - const: hs_src
power-domains:
items:
@@ -19,9 +19,9 @@ properties:
power-domains:
description:
- PM domain provider node and an args specifier containing
- the USB device id value. See,
- Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+ PM domain provider node and an args specifier containing
+ the USB device id value. See,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
clocks:
description: Clock phandles to usb2_refclk and lpm_clk
@@ -13,8 +13,8 @@ properties:
compatible:
items:
- enum:
- - ti,keystone-dwc3
- - ti,am654-dwc3
+ - ti,keystone-dwc3
+ - ti,am654-dwc3
reg:
maxItems: 1
@@ -993,7 +993,8 @@ patternProperties:
"^sst,.*":
description: Silicon Storage Technology, Inc.
"^sstar,.*":
- description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
+ description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
+ (formerly part of MStar Semiconductor, Inc.)
"^st,.*":
description: STMicroelectronics
"^starry,.*":
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/arm,integrator.yaml | 6 +- .../devicetree/bindings/arm/arm,realview.yaml | 66 ++++++------- .../bindings/arm/arm,vexpress-juno.yaml | 12 +-- .../bindings/arm/bcm/brcm,bcm11351.yaml | 2 +- .../bindings/arm/bcm/brcm,bcm21664.yaml | 2 +- .../bindings/arm/bcm/brcm,bcm23550.yaml | 2 +- .../bindings/arm/bcm/brcm,cygnus.yaml | 20 ++-- .../devicetree/bindings/arm/bcm/brcm,hr2.yaml | 2 +- .../devicetree/bindings/arm/bcm/brcm,ns2.yaml | 4 +- .../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 14 +-- .../bindings/arm/bcm/brcm,stingray.yaml | 6 +- .../bindings/arm/bcm/brcm,vulcan-soc.yaml | 4 +- .../bindings/arm/coresight-cti.yaml | 20 ++-- .../devicetree/bindings/arm/cpus.yaml | 4 +- .../devicetree/bindings/arm/fsl.yaml | 13 ++- .../bindings/arm/intel,keembay.yaml | 2 +- .../arm/mediatek/mediatek,pericfg.yaml | 30 +++--- .../bindings/bus/baikal,bt1-apb.yaml | 2 +- .../bindings/bus/baikal,bt1-axi.yaml | 2 +- .../bindings/clock/idt,versaclock5.yaml | 8 +- .../bindings/clock/ingenic,cgu.yaml | 16 ++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 2 +- .../bindings/clock/renesas,cpg-clocks.yaml | 6 +- .../bindings/clock/sprd,sc9863a-clk.yaml | 2 +- .../bindings/display/bridge/nwl-dsi.yaml | 15 ++- .../bindings/display/bridge/renesas,lvds.yaml | 18 ++-- .../display/bridge/simple-bridge.yaml | 18 ++-- .../bindings/display/dsi-controller.yaml | 10 +- .../bindings/display/ilitek,ili9486.yaml | 4 +- .../bindings/display/ingenic,ipu.yaml | 8 +- .../bindings/display/ingenic,lcd.yaml | 10 +- .../devicetree/bindings/display/msm/gmu.yaml | 38 ++++---- .../panel/asus,z00t-tm5p5-nt35596.yaml | 4 +- .../display/panel/boe,tv101wum-nl6.yaml | 12 +-- .../display/panel/elida,kd35t133.yaml | 4 +- .../display/panel/feixin,k101-im2ba02.yaml | 6 +- .../display/panel/ilitek,ili9322.yaml | 3 +- .../display/panel/ilitek,ili9881c.yaml | 3 +- .../display/panel/leadtek,ltk050h3146w.yaml | 4 +- .../display/panel/leadtek,ltk500hd1829.yaml | 4 +- .../display/panel/novatek,nt35510.yaml | 4 +- .../bindings/display/panel/panel-dsi-cm.yaml | 8 +- .../bindings/display/panel/panel-timing.yaml | 20 ++-- .../display/panel/raydium,rm68200.yaml | 4 +- .../panel/samsung,s6e88a0-ams452ef01.yaml | 4 +- .../display/panel/visionox,rm69299.yaml | 2 +- .../bindings/display/st,stm32-dsi.yaml | 3 +- .../bindings/display/ti/ti,j721e-dss.yaml | 2 +- .../devicetree/bindings/dsp/fsl,dsp.yaml | 4 +- .../devicetree/bindings/example-schema.yaml | 4 +- .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 2 +- .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 6 +- .../bindings/gpio/renesas,rcar-gpio.yaml | 58 +++++------ .../devicetree/bindings/gpu/vivante,gc.yaml | 3 +- .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- .../devicetree/bindings/i2c/i2c-imx.yaml | 32 +++---- .../devicetree/bindings/i2c/i2c-pxa.yaml | 4 +- .../bindings/iio/adc/adi,ad7606.yaml | 8 +- .../bindings/iio/adc/maxim,max1238.yaml | 2 +- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 19 ++-- .../bindings/iio/adc/rockchip-saradc.yaml | 8 +- .../bindings/iio/amplifiers/adi,hmc425a.yaml | 4 +- .../bindings/iio/chemical/atlas,sensor.yaml | 4 +- .../bindings/iio/dac/adi,ad5770r.yaml | 60 ++++++------ .../bindings/iio/light/vishay,vcnl4000.yaml | 22 ++--- .../iio/magnetometer/asahi-kasei,ak8975.yaml | 16 ++-- .../iio/proximity/vishay,vcnl3020.yaml | 4 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 2 +- .../devicetree/bindings/input/imx-keypad.yaml | 26 ++--- .../input/touchscreen/cypress,cy8ctma140.yaml | 2 +- .../input/touchscreen/edt-ft5x06.yaml | 10 +- .../bindings/input/touchscreen/goodix.yaml | 5 +- .../input/touchscreen/touchscreen.yaml | 12 +-- .../bindings/interconnect/fsl,imx8m-noc.yaml | 20 ++-- .../bindings/interconnect/qcom,sc7180.yaml | 2 +- .../bindings/interconnect/qcom,sdm845.yaml | 2 +- .../interrupt-controller/arm,gic.yaml | 4 +- .../interrupt-controller/ingenic,intc.yaml | 22 ++--- .../bindings/leds/backlight/qcom-wled.yaml | 3 +- .../devicetree/bindings/mailbox/fsl,mu.yaml | 12 +-- .../bindings/mailbox/qcom-ipcc.yaml | 2 +- .../allwinner,sun8i-a83t-de2-rotate.yaml | 4 +- .../media/allwinner,sun8i-h3-deinterlace.yaml | 4 +- .../bindings/media/i2c/adv7180.yaml | 43 ++++----- .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 2 +- .../bindings/media/i2c/maxim,max9286.yaml | 2 +- .../devicetree/bindings/media/i2c/ov8856.yaml | 3 +- .../bindings/media/renesas,csi2.yaml | 18 ++-- .../bindings/media/rockchip-vpu.yaml | 4 +- .../bindings/media/xilinx/xlnx,csi2rxss.yaml | 15 ++- .../bindings/memory-controllers/fsl/mmdc.yaml | 12 +-- .../memory-controllers/ingenic,nemc.yaml | 8 +- .../memory-controllers/renesas,rpc-if.yaml | 8 +- .../bindings/mfd/cirrus,madera.yaml | 34 +++---- .../bindings/mfd/gateworks-gsc.yaml | 4 +- .../devicetree/bindings/mfd/st,stpmic1.yaml | 24 ++--- .../mfd/ti,j721e-system-controller.yaml | 11 +-- .../devicetree/bindings/mfd/wlf,arizona.yaml | 22 ++--- .../bindings/mmc/amlogic,meson-mx-sdhc.yaml | 6 +- .../devicetree/bindings/mmc/ingenic,mmc.yaml | 14 +-- .../devicetree/bindings/mmc/renesas,sdhi.yaml | 6 +- .../bindings/mtd/arasan,nand-controller.yaml | 8 +- .../devicetree/bindings/mtd/gpmi-nand.yaml | 2 +- .../devicetree/bindings/mtd/mxc-nand.yaml | 2 +- .../bindings/mtd/st,stm32-fmc2-nand.yaml | 2 +- .../devicetree/bindings/net/dsa/dsa.yaml | 4 +- .../devicetree/bindings/net/qcom,ipa.yaml | 12 +-- .../bindings/net/socionext,uniphier-ave4.yaml | 12 +-- .../devicetree/bindings/net/stm32-dwmac.yaml | 12 +-- .../bindings/net/ti,cpsw-switch.yaml | 62 ++++++------ .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 66 ++++++------- .../devicetree/bindings/nvmem/imx-ocotp.yaml | 24 ++--- .../bindings/nvmem/qcom,qfprom.yaml | 4 +- .../phy/amlogic,meson-g12a-usb2-phy.yaml | 6 +- .../bindings/phy/phy-rockchip-inno-usb2.yaml | 6 +- .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 13 ++- .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 9 +- .../bindings/phy/qcom,qusb2-phy.yaml | 30 +++--- .../phy/socionext,uniphier-pcie-phy.yaml | 8 +- .../phy/socionext,uniphier-usb3hs-phy.yaml | 10 +- .../phy/socionext,uniphier-usb3ss-phy.yaml | 22 ++--- .../bindings/phy/ti,phy-j721e-wiz.yaml | 3 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 32 +++---- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 36 +++---- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 96 +++++++++---------- .../bindings/pinctrl/ingenic,pinctrl.yaml | 24 ++--- .../pinctrl/qcom,ipq6018-pinctrl.yaml | 54 +++++------ .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 32 +++---- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 4 +- .../bindings/power/power-domain.yaml | 14 +-- .../bindings/power/supply/gpio-charger.yaml | 4 +- .../regulator/qcom,smd-rpm-regulator.yaml | 3 +- .../regulator/qcom-labibb-regulator.yaml | 4 +- .../bindings/remoteproc/ti,k3-dsp-rproc.yaml | 20 ++-- .../bindings/reset/fsl,imx7-src.yaml | 6 +- .../devicetree/bindings/rtc/ingenic,rtc.yaml | 16 ++-- .../bindings/serial/ingenic,uart.yaml | 20 ++-- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 12 +-- .../bindings/soc/qcom/qcom,geni-se.yaml | 30 +++--- .../bindings/sound/amlogic,aiu.yaml | 11 +-- .../bindings/sound/amlogic,g12a-toacodec.yaml | 10 +- .../bindings/sound/cirrus,cs42l51.yaml | 2 +- .../bindings/sound/ingenic,aic.yaml | 12 +-- .../bindings/sound/maxim,max98390.yaml | 2 +- .../bindings/sound/rockchip-i2s.yaml | 24 ++--- .../bindings/sound/rockchip-spdif.yaml | 4 +- .../devicetree/bindings/sound/tas2770.yaml | 4 +- .../bindings/sound/tlv320adcx140.yaml | 28 +++--- .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 8 +- .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 26 ++--- .../bindings/spi/mikrotik,rb4xx-spi.yaml | 3 +- .../devicetree/bindings/spi/spi-mux.yaml | 74 +++++++------- .../devicetree/bindings/spi/spi-rockchip.yaml | 14 +-- .../thermal/thermal-cooling-devices.yaml | 6 +- .../bindings/thermal/thermal-idle.yaml | 45 +++++---- .../devicetree/bindings/timer/fsl,imxgpt.yaml | 14 +-- .../bindings/timer/ingenic,tcu.yaml | 50 +++++----- .../bindings/timer/snps,dw-apb-timer.yaml | 4 +- .../devicetree/bindings/trivial-devices.yaml | 2 +- .../devicetree/bindings/usb/dwc2.yaml | 31 +++--- .../devicetree/bindings/usb/generic-ehci.yaml | 2 +- .../devicetree/bindings/usb/ingenic,musb.yaml | 8 +- .../bindings/usb/nvidia,tegra-xudc.yaml | 10 +- .../devicetree/bindings/usb/ti,j721e-usb.yaml | 6 +- .../bindings/usb/ti,keystone-dwc3.yaml | 4 +- .../devicetree/bindings/vendor-prefixes.yaml | 3 +- 166 files changed, 1103 insertions(+), 1113 deletions(-)