| Message ID | 20200820161152.22751-6-eajames@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/5] dt-bindings: input: Add documentation for IBM Operation Panel | expand |
On Thu, 20 Aug 2020 at 16:12, Eddie James <eajames@linux.ibm.com> wrote: > > Set I2C bus 7 to multi-master mode and add the panel device that will > register as a slave. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> Same comments as for Tacoma. Reviewed-by: Joel Stanley <joel@jms.id.au> > --- > arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts > index b94421f6cbd5..f121f3c26a3a 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts > @@ -698,6 +698,7 @@ eeprom@53 { > }; > > &i2c7 { > + multi-master; > status = "okay"; > > si7021-a20@20 { > @@ -831,6 +832,11 @@ gpio@15 { > }; > }; > > + ibm-panel@62 { > + compatible = "ibm,op-panel"; > + reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */ > + }; > + > dps: dps310@76 { > compatible = "infineon,dps310"; > reg = <0x76>; > -- > 2.26.2 >
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index b94421f6cbd5..f121f3c26a3a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -698,6 +698,7 @@ eeprom@53 { }; &i2c7 { + multi-master; status = "okay"; si7021-a20@20 { @@ -831,6 +832,11 @@ gpio@15 { }; }; + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */ + }; + dps: dps310@76 { compatible = "infineon,dps310"; reg = <0x76>;
Set I2C bus 7 to multi-master mode and add the panel device that will register as a slave. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++ 1 file changed, 6 insertions(+)