@@ -385,9 +385,32 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
/**
* struct line - contains the state of a requested line
* @desc: the GPIO descriptor for this line.
+ * @req: the corresponding line request
+ * @irq: the interrupt triggered in response to events on this GPIO
+ * @eflags: the edge flags, GPIO_V2_LINE_FLAG_EDGE_RISING and/or
+ * GPIO_V2_LINE_FLAG_EDGE_FALLING, indicating the edge detection applied
+ * @timestamp: cache for the timestamp storing it between hardirq and IRQ
+ * thread, used to bring the timestamp close to the actual event
+ * @req_seqno: the seqno for the current edge event in the sequence of
+ * events for the corresponding line request. This is drawn from the @req.
+ * @line_seqno: the seqno for the current edge event in the sequence of
+ * events for this line.
*/
struct line {
struct gpio_desc *desc;
+ /*
+ * -- edge detector specific fields --
+ */
+ struct linereq *req;
+ unsigned int irq;
+ u64 eflags;
+ /*
+ * timestamp and req_seqno are shared by edge_irq_handler() and
+ * edge_irq_thread() which are themselves mutually exclusive.
+ */
+ u64 timestamp;
+ u32 req_seqno;
+ u32 line_seqno;
};
/**
@@ -395,15 +418,143 @@ struct line {
* @gdev: the GPIO device the line request pertains to
* @label: consumer label used to tag GPIO descriptors
* @num_lines: the number of lines in the lines array
+ * @wait: wait queue that handles blocking reads of events
+ * @events: KFIFO for the GPIO events
+ * @seqno: the sequence number for edge events generated on all lines in
+ * this line request. Note that this is not used when @num_lines is 1, as
+ * the line_seqno is then the same and is cheaper to calculate.
* @lines: the lines held by this line request, with @num_lines elements.
*/
struct linereq {
struct gpio_device *gdev;
const char *label;
u32 num_lines;
+ wait_queue_head_t wait;
+ DECLARE_KFIFO_PTR(events, struct gpio_v2_line_event);
+ atomic_t seqno;
struct line lines[];
};
+static irqreturn_t edge_irq_thread(int irq, void *p)
+{
+ struct line *line = p;
+ struct linereq *lr = line->req;
+ struct gpio_v2_line_event le;
+ int ret;
+
+ /* Do not leak kernel stack to userspace */
+ memset(&le, 0, sizeof(le));
+
+ /*
+ * We may be running from a nested threaded interrupt in which case
+ * we didn't get the timestamp from edge_irq_handler().
+ */
+ if (!line->timestamp) {
+ le.timestamp = ktime_get_ns();
+ if (lr->num_lines != 1)
+ line->req_seqno = atomic_inc_return(&lr->seqno);
+ } else {
+ le.timestamp = line->timestamp;
+ }
+ line->timestamp = 0;
+
+ if (line->eflags == (GPIO_V2_LINE_FLAG_EDGE_RISING |
+ GPIO_V2_LINE_FLAG_EDGE_FALLING)) {
+ int level = gpiod_get_value_cansleep(line->desc);
+
+ if (level)
+ /* Emit low-to-high event */
+ le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
+ else
+ /* Emit high-to-low event */
+ le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ } else if (line->eflags == GPIO_V2_LINE_FLAG_EDGE_RISING) {
+ /* Emit low-to-high event */
+ le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
+ } else if (line->eflags == GPIO_V2_LINE_FLAG_EDGE_FALLING) {
+ /* Emit high-to-low event */
+ le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ } else {
+ return IRQ_NONE;
+ }
+ line->line_seqno++;
+ le.line_seqno = line->line_seqno;
+ le.seqno = (lr->num_lines == 1) ? le.line_seqno : line->req_seqno;
+ le.offset = gpio_chip_hwgpio(line->desc);
+
+ ret = kfifo_in_spinlocked_noirqsave(&lr->events, &le,
+ 1, &lr->wait.lock);
+ if (ret)
+ wake_up_poll(&lr->wait, EPOLLIN);
+ else
+ pr_debug_ratelimited("event FIFO is full - event dropped\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t edge_irq_handler(int irq, void *p)
+{
+ struct line *line = p;
+ struct linereq *lr = line->req;
+
+ /*
+ * Just store the timestamp in hardirq context so we get it as
+ * close in time as possible to the actual event.
+ */
+ line->timestamp = ktime_get_ns();
+
+ if (lr->num_lines != 1)
+ line->req_seqno = atomic_inc_return(&lr->seqno);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static int edge_detector_start(struct line *line)
+{
+ unsigned long irqflags = 0;
+ int irq, ret;
+
+ irq = gpiod_to_irq(line->desc);
+ if (irq <= 0)
+ return -ENODEV;
+
+ line->req_seqno = 0;
+ line->line_seqno = 0;
+
+ if (line->eflags & GPIO_V2_LINE_FLAG_EDGE_RISING)
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &line->desc->flags) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+ if (line->eflags & GPIO_V2_LINE_FLAG_EDGE_FALLING)
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &line->desc->flags) ?
+ IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+ irqflags |= IRQF_ONESHOT;
+
+ /* Request a thread to read the events */
+ ret = request_threaded_irq(irq, edge_irq_handler, edge_irq_thread,
+ irqflags, line->req->label, line);
+ if (ret)
+ return ret;
+
+ line->irq = irq;
+ return 0;
+}
+
+static void edge_detector_stop(struct line *line)
+{
+ if (line->irq) {
+ free_irq(line->irq, line);
+ line->irq = 0;
+ }
+}
+
+static int edge_detector_setup(struct line *line,
+ struct gpio_v2_line_config *lc)
+{
+ if (line->eflags)
+ return edge_detector_start(line);
+ return 0;
+}
+
#define GPIO_V2_LINE_BIAS_FLAGS \
(GPIO_V2_LINE_FLAG_BIAS_PULL_UP | \
GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN | \
@@ -417,10 +568,15 @@ struct linereq {
(GPIO_V2_LINE_FLAG_OPEN_DRAIN | \
GPIO_V2_LINE_FLAG_OPEN_SOURCE)
+#define GPIO_V2_LINE_EDGE_FLAGS \
+ (GPIO_V2_LINE_FLAG_EDGE_RISING | \
+ GPIO_V2_LINE_FLAG_EDGE_FALLING)
+
#define GPIO_V2_LINE_VALID_FLAGS \
(GPIO_V2_LINE_FLAG_ACTIVE_LOW | \
GPIO_V2_LINE_DIRECTION_FLAGS | \
GPIO_V2_LINE_DRIVE_FLAGS | \
+ GPIO_V2_LINE_EDGE_FLAGS | \
GPIO_V2_LINE_BIAS_FLAGS)
static u64 gpio_v2_line_config_flags(struct gpio_v2_line_config *lc,
@@ -437,6 +593,21 @@ static u64 gpio_v2_line_config_flags(struct gpio_v2_line_config *lc,
return lc->flags;
}
+static bool gpio_v2_line_config_has_edge_detection(struct gpio_v2_line_config *lc)
+{
+ unsigned int i;
+
+ if (lc->flags & GPIO_V2_LINE_EDGE_FLAGS)
+ return true;
+
+ for (i = 0; i < lc->num_attrs; i--) {
+ if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_FLAGS) &&
+ (lc->attrs[i].attr.flags & GPIO_V2_LINE_EDGE_FLAGS))
+ return true;
+ }
+ return false;
+}
+
static int gpio_v2_line_config_output_value(struct gpio_v2_line_config *lc,
unsigned int line_idx)
{
@@ -465,6 +636,11 @@ static int gpio_v2_line_flags_validate(u64 flags)
(flags & GPIO_V2_LINE_FLAG_OUTPUT))
return -EINVAL;
+ /* Edge detection requires explicit input. */
+ if ((flags & GPIO_V2_LINE_EDGE_FLAGS) &&
+ !(flags & GPIO_V2_LINE_FLAG_INPUT))
+ return -EINVAL;
+
/*
* Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If
* the hardware actually supports enabling both at the same time the
@@ -526,6 +702,10 @@ static void gpio_v2_line_config_flags_to_desc_flags(u64 flags,
set_bit(FLAG_IS_OUT, flagsp);
else if (flags & GPIO_V2_LINE_FLAG_INPUT)
clear_bit(FLAG_IS_OUT, flagsp);
+ assign_bit(FLAG_EDGE_RISING, flagsp,
+ flags & GPIO_V2_LINE_FLAG_EDGE_RISING);
+ assign_bit(FLAG_EDGE_FALLING, flagsp,
+ flags & GPIO_V2_LINE_FLAG_EDGE_FALLING);
assign_bit(FLAG_OPEN_DRAIN, flagsp,
flags & GPIO_V2_LINE_FLAG_OPEN_DRAIN);
assign_bit(FLAG_OPEN_SOURCE, flagsp,
@@ -612,14 +792,85 @@ static long linereq_ioctl_compat(struct file *file, unsigned int cmd,
}
#endif
+static __poll_t linereq_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct linereq *lr = file->private_data;
+ __poll_t events = 0;
+
+ poll_wait(file, &lr->wait, wait);
+
+ if (!kfifo_is_empty_spinlocked_noirqsave(&lr->events,
+ &lr->wait.lock))
+ events = EPOLLIN | EPOLLRDNORM;
+
+ return events;
+}
+
+static ssize_t linereq_read(struct file *file,
+ char __user *buf,
+ size_t count,
+ loff_t *f_ps)
+{
+ struct linereq *lr = file->private_data;
+ struct gpio_v2_line_event le;
+ ssize_t bytes_read = 0;
+ int ret;
+
+ if (count < sizeof(le))
+ return -EINVAL;
+
+ do {
+ spin_lock(&lr->wait.lock);
+ if (kfifo_is_empty(&lr->events)) {
+ if (bytes_read) {
+ spin_unlock(&lr->wait.lock);
+ return bytes_read;
+ }
+
+ if (file->f_flags & O_NONBLOCK) {
+ spin_unlock(&lr->wait.lock);
+ return -EAGAIN;
+ }
+
+ ret = wait_event_interruptible_locked(lr->wait,
+ !kfifo_is_empty(&lr->events));
+ if (ret) {
+ spin_unlock(&lr->wait.lock);
+ return ret;
+ }
+ }
+
+ ret = kfifo_out(&lr->events, &le, 1);
+ spin_unlock(&lr->wait.lock);
+ if (ret != 1) {
+ /*
+ * This should never happen - we were holding the
+ * lock from the moment we learned the fifo is no
+ * longer empty until now.
+ */
+ ret = -EIO;
+ break;
+ }
+
+ if (copy_to_user(buf + bytes_read, &le, sizeof(le)))
+ return -EFAULT;
+ bytes_read += sizeof(le);
+ } while (count >= bytes_read + sizeof(le));
+
+ return bytes_read;
+}
+
static void linereq_free(struct linereq *lr)
{
unsigned int i;
for (i = 0; i < lr->num_lines; i++) {
+ edge_detector_stop(&lr->lines[i]);
if (lr->lines[i].desc)
gpiod_free(lr->lines[i].desc);
}
+ kfifo_free(&lr->events);
kfree(lr->label);
put_device(&lr->gdev->dev);
kfree(lr);
@@ -635,6 +886,8 @@ static int linereq_release(struct inode *inode, struct file *file)
static const struct file_operations line_fileops = {
.release = linereq_release,
+ .read = linereq_read,
+ .poll = linereq_poll,
.owner = THIS_MODULE,
.llseek = noop_llseek,
.unlocked_ioctl = linereq_ioctl,
@@ -650,7 +903,8 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
struct linereq *lr;
struct file *file;
unsigned long flags;
- unsigned int i;
+ unsigned int i, size;
+ bool has_edge_detection;
int fd, ret;
if (copy_from_user(&ulr, ip, sizeof(ulr)))
@@ -667,6 +921,11 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
if (ret)
return ret;
+ /* event_buffer_size is only valid with edge detection */
+ has_edge_detection = gpio_v2_line_config_has_edge_detection(lc);
+ if (ulr.event_buffer_size && !has_edge_detection)
+ return -EINVAL;
+
lr = kzalloc(struct_size(lr, lines, ulr.num_lines), GFP_KERNEL);
if (!lr)
return -ENOMEM;
@@ -674,6 +933,9 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
lr->gdev = gdev;
get_device(&gdev->dev);
+ for (i = 0; i < ulr.num_lines; i++)
+ lr->lines[i].req = lr;
+
/* Make sure this is terminated */
ulr.consumer[sizeof(ulr.consumer)-1] = '\0';
if (strlen(ulr.consumer)) {
@@ -684,6 +946,21 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
}
}
+ init_waitqueue_head(&lr->wait);
+ if (has_edge_detection) {
+ size = ulr.event_buffer_size;
+
+ if (size > GPIO_V2_LINES_MAX*16)
+ size = GPIO_V2_LINES_MAX*16;
+ else if (size == 0)
+ size = ulr.num_lines*16;
+
+ ret = kfifo_alloc(&lr->events, size, GFP_KERNEL);
+ if (ret)
+ goto out_free_linereq;
+ }
+
+ atomic_set(&lr->seqno, 0);
lr->num_lines = ulr.num_lines;
/* Request each GPIO */
@@ -722,6 +999,10 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
ret = gpiod_direction_input(desc);
if (ret)
goto out_free_linereq;
+ lr->lines[i].eflags = flags & GPIO_V2_LINE_EDGE_FLAGS;
+ ret = edge_detector_setup(&lr->lines[i], lc);
+ if (ret)
+ goto out_free_linereq;
}
blocking_notifier_call_chain(&desc->gdev->notifier,
@@ -1243,6 +1524,13 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
if (test_bit(FLAG_PULL_UP, &desc->flags))
info->flags |= GPIO_V2_LINE_FLAG_BIAS_PULL_UP;
+ if (test_bit(FLAG_EDGE_RISING, &desc->flags))
+ info->flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
+ if (test_bit(FLAG_EDGE_FALLING, &desc->flags))
+ info->flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
+
+ info->num_attrs = 0;
+
spin_unlock_irqrestore(&gpio_lock, flags);
}
@@ -2041,6 +2041,8 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
clear_bit(FLAG_PULL_UP, &desc->flags);
clear_bit(FLAG_PULL_DOWN, &desc->flags);
clear_bit(FLAG_BIAS_DISABLE, &desc->flags);
+ clear_bit(FLAG_EDGE_RISING, &desc->flags);
+ clear_bit(FLAG_EDGE_FALLING, &desc->flags);
clear_bit(FLAG_IS_HOGGED, &desc->flags);
#ifdef CONFIG_OF_DYNAMIC
desc->hog = NULL;
@@ -114,6 +114,8 @@ struct gpio_desc {
#define FLAG_PULL_UP 13 /* GPIO has pull up enabled */
#define FLAG_PULL_DOWN 14 /* GPIO has pull down enabled */
#define FLAG_BIAS_DISABLE 15 /* GPIO has pull disabled */
+#define FLAG_EDGE_RISING 16 /* GPIO CDEV detects rising edge events */
+#define FLAG_EDGE_FALLING 17 /* GPIO CDEV detects falling edge events */
/* Connection label */
const char *label;
Add support for edge detection to lines requested using GPIO_V2_GET_LINE_IOCTL. The edge_detector implementation is based on the v1 lineevent implementation. Signed-off-by: Kent Gibson <warthog618@gmail.com> --- drivers/gpio/gpiolib-cdev.c | 290 +++++++++++++++++++++++++++++++++++- drivers/gpio/gpiolib.c | 2 + drivers/gpio/gpiolib.h | 2 + 3 files changed, 293 insertions(+), 1 deletion(-)