diff mbox series

[06/11] extcon: ptn5150: Simplify getting vbus-gpios with flags

Message ID 20200812162958.6180-6-krzk@kernel.org
State Accepted
Commit e095882ee28a7b1c1c19c43606b83ec6a5912666
Headers show
Series None | expand

Commit Message

Krzysztof Kozlowski Aug. 12, 2020, 4:29 p.m. UTC 
Instead of obtaining GPIO as input and configuring it right after to
output-low, just use proper GPIOD_OUT_LOW flag.  Code is smaller and
simpler.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/extcon/extcon-ptn5150.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 12e52ddbd77e..3b99ad41b06e 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -239,16 +239,11 @@  static int ptn5150_i2c_probe(struct i2c_client *i2c,
 
 	info->dev = &i2c->dev;
 	info->i2c = i2c;
-	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_IN);
+	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_OUT_LOW);
 	if (IS_ERR(info->vbus_gpiod)) {
 		dev_err(dev, "failed to get VBUS GPIO\n");
 		return PTR_ERR(info->vbus_gpiod);
 	}
-	ret = gpiod_direction_output(info->vbus_gpiod, 0);
-	if (ret) {
-		dev_err(dev, "failed to set VBUS GPIO direction\n");
-		return -EINVAL;
-	}
 
 	mutex_init(&info->mutex);