diff mbox series

[2/5] arm64: dts: imx8mq-evk: Replace deprecated phy reset properties

Message ID 20200823111508.1165-2-krzk@kernel.org
State Accepted
Commit 0e825b32c033e1998d0ebaf247f5dab3c340e3bf
Headers show
Series None | expand

Commit Message

Krzysztof Kozlowski Aug. 23, 2020, 11:15 a.m. UTC
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested on HW.
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c9241abf0df3..8aa9cd8e495a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -137,8 +137,6 @@ 
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
-	phy-reset-gpios = <&gpio1 9  GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <10>;
 	fsl,magic-packet;
 	status = "okay";
 
@@ -149,6 +147,8 @@ 
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
 		};
 	};
 };