diff mbox series

[v3,10/11] Bluetooth: ath3k: use usb_control_msg_send() and usb_control_msg_recv()

Message ID 20200914153756.3412156-11-gregkh@linuxfoundation.org
State Superseded
Headers show
Series USB: new USB control message helper functions | expand

Commit Message

Greg KH Sept. 14, 2020, 3:37 p.m. UTC
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v3:
 - no change from v2

v2:
 - no change from v1

 drivers/bluetooth/ath3k.c | 90 +++++++++++----------------------------
 1 file changed, 26 insertions(+), 64 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 4ce270513695..1472cccfd0b3 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -212,19 +212,16 @@  static int ath3k_load_firmware(struct usb_device *udev,
 
 	BT_DBG("udev %p", udev);
 
-	pipe = usb_sndctrlpipe(udev, 0);
-
 	send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 	if (!send_buf) {
 		BT_ERR("Can't allocate memory chunk for firmware");
 		return -ENOMEM;
 	}
 
-	memcpy(send_buf, firmware->data, FW_HDR_SIZE);
-	err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
-			      0, 0, send_buf, FW_HDR_SIZE,
-			      USB_CTRL_SET_TIMEOUT);
-	if (err < 0) {
+	err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
+				   0, 0, firmware->data, FW_HDR_SIZE,
+				   USB_CTRL_SET_TIMEOUT);
+	if (err) {
 		BT_ERR("Can't change to loading configuration err");
 		goto error;
 	}
@@ -259,44 +256,17 @@  static int ath3k_load_firmware(struct usb_device *udev,
 
 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 {
-	int ret, pipe = 0;
-	char *buf;
-
-	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	pipe = usb_rcvctrlpipe(udev, 0);
-	ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
-			      USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-			      buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
-
-	*state = *buf;
-	kfree(buf);
-
-	return ret;
+	return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
+				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				    state, 1, USB_CTRL_SET_TIMEOUT);
 }
 
 static int ath3k_get_version(struct usb_device *udev,
 			struct ath3k_version *version)
 {
-	int ret, pipe = 0;
-	struct ath3k_version *buf;
-	const int size = sizeof(*buf);
-
-	buf = kmalloc(size, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	pipe = usb_rcvctrlpipe(udev, 0);
-	ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
-			      USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-			      buf, size, USB_CTRL_SET_TIMEOUT);
-
-	memcpy(version, buf, size);
-	kfree(buf);
-
-	return ret;
+	return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
+				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				    version, sizeof(*version), USB_CTRL_SET_TIMEOUT);
 }
 
 static int ath3k_load_fwfile(struct usb_device *udev,
@@ -316,13 +286,10 @@  static int ath3k_load_fwfile(struct usb_device *udev,
 	}
 
 	size = min_t(uint, count, FW_HDR_SIZE);
-	memcpy(send_buf, firmware->data, size);
 
-	pipe = usb_sndctrlpipe(udev, 0);
-	ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
-			USB_TYPE_VENDOR, 0, 0, send_buf,
-			size, USB_CTRL_SET_TIMEOUT);
-	if (ret < 0) {
+	ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
+				   firmware->data, size, USB_CTRL_SET_TIMEOUT);
+	if (ret) {
 		BT_ERR("Can't change to loading configuration err");
 		kfree(send_buf);
 		return ret;
@@ -355,23 +322,19 @@  static int ath3k_load_fwfile(struct usb_device *udev,
 	return 0;
 }
 
-static int ath3k_switch_pid(struct usb_device *udev)
+static void ath3k_switch_pid(struct usb_device *udev)
 {
-	int pipe = 0;
-
-	pipe = usb_sndctrlpipe(udev, 0);
-	return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
-			USB_TYPE_VENDOR, 0, 0,
-			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
+			     0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 static int ath3k_set_normal_mode(struct usb_device *udev)
 {
 	unsigned char fw_state;
-	int pipe = 0, ret;
+	int ret;
 
 	ret = ath3k_get_state(udev, &fw_state);
-	if (ret < 0) {
+	if (ret) {
 		BT_ERR("Can't get state to change to normal mode err");
 		return ret;
 	}
@@ -381,10 +344,9 @@  static int ath3k_set_normal_mode(struct usb_device *udev)
 		return 0;
 	}
 
-	pipe = usb_sndctrlpipe(udev, 0);
-	return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
-			USB_TYPE_VENDOR, 0, 0,
-			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
+				    USB_TYPE_VENDOR, 0, 0, NULL, 0,
+				    USB_CTRL_SET_TIMEOUT);
 }
 
 static int ath3k_load_patch(struct usb_device *udev)
@@ -397,7 +359,7 @@  static int ath3k_load_patch(struct usb_device *udev)
 	int ret;
 
 	ret = ath3k_get_state(udev, &fw_state);
-	if (ret < 0) {
+	if (ret) {
 		BT_ERR("Can't get state to change to load ram patch err");
 		return ret;
 	}
@@ -408,7 +370,7 @@  static int ath3k_load_patch(struct usb_device *udev)
 	}
 
 	ret = ath3k_get_version(udev, &fw_version);
-	if (ret < 0) {
+	if (ret) {
 		BT_ERR("Can't get version to change to load ram patch err");
 		return ret;
 	}
@@ -449,13 +411,13 @@  static int ath3k_load_syscfg(struct usb_device *udev)
 	int clk_value, ret;
 
 	ret = ath3k_get_state(udev, &fw_state);
-	if (ret < 0) {
+	if (ret) {
 		BT_ERR("Can't get state to change to load configuration err");
 		return -EBUSY;
 	}
 
 	ret = ath3k_get_version(udev, &fw_version);
-	if (ret < 0) {
+	if (ret) {
 		BT_ERR("Can't get version to change to load ram patch err");
 		return ret;
 	}
@@ -529,7 +491,7 @@  static int ath3k_probe(struct usb_interface *intf,
 			return ret;
 		}
 		ret = ath3k_set_normal_mode(udev);
-		if (ret < 0) {
+		if (ret) {
 			BT_ERR("Set normal mode failed");
 			return ret;
 		}