diff mbox series

[v6,12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

Message ID 1597402388-14112-13-git-send-email-rohitkr@codeaurora.org
State New
Headers show
Series ASoC: qcom: Add support for SC7180 lpass variant | expand

Commit Message

Rohit Kumar Aug. 14, 2020, 10:53 a.m. UTC
Update lpass-cpu binding with yaml formats.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 --------------
 .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 189 +++++++++++++++++++++
 2 files changed, 189 insertions(+), 130 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index c07202c..00000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,130 +0,0 @@ 
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
-			  "qcom,sc7180-lpass-cpu"
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: A list which must include the following entries:
-				* "ahbix-clk"
-				* "mi2s-osr-clk"
-				* "mi2s-bit-clk"
-			: required clocks for "qcom,lpass-cpu-apq8016"
-				* "ahbix-clk"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "mi2s-bit-clk2"
-				* "mi2s-bit-clk3"
-				* "pcnoc-mport-clk"
-				* "pcnoc-sway-clk"
-			: required clocks for "qcom,lpass-cpu-sc7180"
-				* "audio-core"
-				* "mclk0"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "pcnoc-sway-clk"
-				* "pcnoc-mport-clk"
-
-- interrupts		: Must contain an entry for each entry in
-			  interrupt-names.
-- interrupt-names	: A list which must include the following entries:
-				* "lpass-irq-lpaif"
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "lpass-lpaif"
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp		: Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg			: Must be one of the DAI IDs
-			  (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
-			  Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines	: List of serial data lines to use for capture
-			  Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Examples:
-1)
-
-lpass@28100000 {
-	compatible = "qcom,lpass-cpu";
-	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-	interrupts = <0 85 1>;
-	interrupt-names = "lpass-irq-lpaif";
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&mi2s_default>;
-	pinctrl-1 = <&mi2s_idle>;
-	reg = <0x28100000 0x10000>;
-	reg-names = "lpass-lpaif";
-	qcom,adsp = <&adsp>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* Optional to set different MI2S SD lines */
-	dai@3 {
-		reg = <MI2S_QUATERNARY>;
-		qcom,playback-sd-lines = <0 1>;
-	};
-};
-
-2)
-
-#include <dt-bindings/sound/sc7180-lpass.h>
-
-lpass_cpu: lpass {
-	compatible = "qcom,sc7180-lpass-cpu";
-
-	reg = <0 0x62F00000 0 0x29000>;
-
-	iommus = <&apps_smmu 0x1020 0>;
-
-	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
-	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
-	clock-names = "pcnoc-sway-clk", "audio-core",
-			"mclk0", "pcnoc-mport-clk",
-			"mi2s-bit-clk0", "mi2s-bit-clk1";
-	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "lpass-irq-lpaif";
-
-
-	#sound-dai-cells = <1>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mi2s-primary@0 {
-		reg = <MI2S_PRIMARY>;
-		qcom,playback-sd-lines = <1>;
-		qcom,capture-sd-lines = <0>;
-	};
-
-	mi2s-secondary@1 {
-		reg = <MI2S_SECONDARY>;
-		qcom,playback-sd-lines = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 00000000..09c9bd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,189 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <rohitkr@codeaurora.org>
+
+description: |
+  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
+  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
+  is a module to configure Low-Power Audio Interface(LPAIF) core registers
+  across different IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,sc7180-lpass-cpu
+
+  reg:
+    maxItems: 1
+    description: LPAIF core registers
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+    description: LPAIF DMA buffer interrupt
+
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    maxItems: 1
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "(^mi2s-[0-9a-f]$|mi2s)":
+    type: object
+    description: Required properties for each DAI
+
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+      qcom,playback-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for playback
+
+      qcom,capture-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for capture
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-osr-clk
+            - const: mi2s-bit-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,apq8016-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+            - const: mi2s-bit-clk2
+            - const: mi2s-bit-clk3
+            - const: pcnoc-mport-clk
+            - const: pcnoc-sway-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7180-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pcnoc-sway-clk
+            - const: audio-core
+            - const: mclk0
+            - const: pcnoc-mport-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+      required:
+        - iommus
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/sound/sc7180-lpass.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        lpass@62f00000 {
+            compatible = "qcom,sc7180-lpass-cpu";
+
+            reg = <0 0x62f00000  0 0x29000>;
+
+            iommus = <&apps_smmu 0x1020 0>;
+            power-domains = <&lpass_hm 0>;
+
+            clocks = <&gcc 131>,
+                 <&lpasscorecc 6>,
+                 <&lpasscorecc 7>,
+                 <&lpasscorecc 10>,
+                 <&lpasscorecc 8>,
+                 <&lpasscorecc 9>;
+
+            clock-names = "pcnoc-sway-clk", "audio-core",
+                          "mclk0", "pcnoc-mport-clk",
+                          "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+            interrupts = <0 160 1>;
+
+            #sound-dai-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* Optional to set different MI2S SD lines */
+            mi2s-primary@0 {
+                reg = <MI2S_PRIMARY>;
+                qcom,playback-sd-lines = <1>;
+                qcom,capture-sd-lines = <0>;
+            };
+        };
+    };
+
+...