| Message ID | 20200909195640.3127341-2-robert.marko@sartura.hr |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm: dts: qcom: ipq4019: add more boards | expand |
On Wed, Sep 9, 2020 at 9:56 PM Robert Marko <robert.marko@sartura.hr> wrote: > > Lets add labels to more commonly used nodes for easier modification in board DTS files. > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > Cc: Luka Perkov <luka.perkov@sartura.hr> > --- > Changes since v1: > * Drop include that does not exist > > arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi > index 3d056aada8d1..7bf1da916f25 100644 > --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi > +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi > @@ -190,7 +190,7 @@ gcc: clock-controller@1800000 { > reg = <0x1800000 0x60000>; > }; > > - rng@22000 { > + prng: rng@22000 { > compatible = "qcom,prng"; > reg = <0x22000 0x140>; > clocks = <&gcc GCC_PRNG_AHB_CLK>; > @@ -310,7 +310,7 @@ cryptobam: dma@8e04000 { > status = "disabled"; > }; > > - crypto@8e3a000 { > + crypto: crypto@8e3a000 { > compatible = "qcom,crypto-v5.1"; > reg = <0x08e3a000 0x6000>; > clocks = <&gcc GCC_CRYPTO_AHB_CLK>, > @@ -396,7 +396,7 @@ blsp1_uart2: serial@78b0000 { > dma-names = "rx", "tx"; > }; > > - watchdog@b017000 { > + watchdog: watchdog@b017000 { > compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; > reg = <0xb017000 0x40>; > clocks = <&sleep_clk>; > -- > 2.26.2 > Hi, Is there an issue with the patch preventing the review? Regards, Robert
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 3d056aada8d1..7bf1da916f25 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -190,7 +190,7 @@ gcc: clock-controller@1800000 { reg = <0x1800000 0x60000>; }; - rng@22000 { + prng: rng@22000 { compatible = "qcom,prng"; reg = <0x22000 0x140>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -310,7 +310,7 @@ cryptobam: dma@8e04000 { status = "disabled"; }; - crypto@8e3a000 { + crypto: crypto@8e3a000 { compatible = "qcom,crypto-v5.1"; reg = <0x08e3a000 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, @@ -396,7 +396,7 @@ blsp1_uart2: serial@78b0000 { dma-names = "rx", "tx"; }; - watchdog@b017000 { + watchdog: watchdog@b017000 { compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; reg = <0xb017000 0x40>; clocks = <&sleep_clk>;
Lets add labels to more commonly used nodes for easier modification in board DTS files. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> --- Changes since v1: * Drop include that does not exist arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)