| Message ID | 20200915120203.290295-1-dmitry.baryshkov@linaro.org |
|---|---|
| State | Accepted |
| Commit | 01e869cc0db9ab0d87818cb926ee97629e2a3f98 |
| Headers | show |
| Series | arm64: dts: sm8250: Add OPP table for all qup devices | expand |
On Tue, Sep 15, 2020 at 03:02:03PM +0300, Dmitry Baryshkov wrote: > qup has a requirement to vote on the performance state of the CX domain > in sm8250 devices. Add OPP tables for these and also add power-domains > property for all qup instances for uart and spi. > i2c does not support scaling and uses a fixed clock. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 69 ++++++++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index c989bc1370ab..6cd45a667ba9 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -411,6 +411,25 @@ ipcc: mailbox@408000 { > #mbox-cells = <2>; > }; > > + qup_opp_table: qup-opp-table { > + compatible = "operating-points-v2"; > + > + opp-50000000 { > + opp-hz = /bits/ 64 <50000000>; > + required-opps = <&rpmhpd_opp_min_svs>; > + }; > + > + opp-75000000 { > + opp-hz = /bits/ 64 <75000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-120000000 { > + opp-hz = /bits/ 64 <120000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + }; > + > qupv3_id_2: geniqup@8c0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x008c0000 0x0 0x6000>; > @@ -445,6 +464,8 @@ spi14: spi@880000 { > interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -471,6 +492,8 @@ spi15: spi@884000 { > interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -497,6 +520,8 @@ spi16: spi@888000 { > interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -523,6 +548,8 @@ spi17: spi@88c000 { > interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -534,6 +561,8 @@ uart17: serial@88c000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart17_default>; > interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -560,6 +589,8 @@ spi18: spi@890000 { > interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -571,6 +602,8 @@ uart18: serial@890000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart18_default>; > interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -597,6 +630,8 @@ spi19: spi@894000 { > interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > @@ -635,6 +670,8 @@ spi0: spi@980000 { > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -661,6 +698,8 @@ spi1: spi@984000 { > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -687,6 +726,8 @@ spi2: spi@988000 { > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -698,6 +739,8 @@ uart2: serial@988000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart2_default>; > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -724,6 +767,8 @@ spi3: spi@98c000 { > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -750,6 +795,8 @@ spi4: spi@990000 { > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -776,6 +823,8 @@ spi5: spi@994000 { > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -802,6 +851,8 @@ spi6: spi@998000 { > interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -813,6 +864,8 @@ uart6: serial@998000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart6_default>; > interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -839,6 +892,8 @@ spi7: spi@99c000 { > interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > @@ -877,6 +932,8 @@ spi8: spi@a80000 { > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -903,6 +960,8 @@ spi9: spi@a84000 { > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -929,6 +988,8 @@ spi10: spi@a88000 { > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -955,6 +1016,8 @@ spi11: spi@a8c000 { > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -981,6 +1044,8 @@ spi12: spi@a90000 { > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -992,6 +1057,8 @@ uart12: serial@a90000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart12_default>; > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -1018,6 +1085,8 @@ spi13: spi@a94000 { > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > -- > 2.28.0 >
On Tue 15 Sep 12:02 UTC 2020, Dmitry Baryshkov wrote: > qup has a requirement to vote on the performance state of the CX domain > in sm8250 devices. Add OPP tables for these and also add power-domains > property for all qup instances for uart and spi. > i2c does not support scaling and uses a fixed clock. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Applied Thanks, Bjorn > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 69 ++++++++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index c989bc1370ab..6cd45a667ba9 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -411,6 +411,25 @@ ipcc: mailbox@408000 { > #mbox-cells = <2>; > }; > > + qup_opp_table: qup-opp-table { > + compatible = "operating-points-v2"; > + > + opp-50000000 { > + opp-hz = /bits/ 64 <50000000>; > + required-opps = <&rpmhpd_opp_min_svs>; > + }; > + > + opp-75000000 { > + opp-hz = /bits/ 64 <75000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-120000000 { > + opp-hz = /bits/ 64 <120000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + }; > + > qupv3_id_2: geniqup@8c0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x008c0000 0x0 0x6000>; > @@ -445,6 +464,8 @@ spi14: spi@880000 { > interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -471,6 +492,8 @@ spi15: spi@884000 { > interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -497,6 +520,8 @@ spi16: spi@888000 { > interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -523,6 +548,8 @@ spi17: spi@88c000 { > interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -534,6 +561,8 @@ uart17: serial@88c000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart17_default>; > interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -560,6 +589,8 @@ spi18: spi@890000 { > interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -571,6 +602,8 @@ uart18: serial@890000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart18_default>; > interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -597,6 +630,8 @@ spi19: spi@894000 { > interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > @@ -635,6 +670,8 @@ spi0: spi@980000 { > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -661,6 +698,8 @@ spi1: spi@984000 { > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -687,6 +726,8 @@ spi2: spi@988000 { > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -698,6 +739,8 @@ uart2: serial@988000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart2_default>; > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -724,6 +767,8 @@ spi3: spi@98c000 { > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -750,6 +795,8 @@ spi4: spi@990000 { > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -776,6 +823,8 @@ spi5: spi@994000 { > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -802,6 +851,8 @@ spi6: spi@998000 { > interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -813,6 +864,8 @@ uart6: serial@998000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart6_default>; > interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -839,6 +892,8 @@ spi7: spi@99c000 { > interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > @@ -877,6 +932,8 @@ spi8: spi@a80000 { > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -903,6 +960,8 @@ spi9: spi@a84000 { > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -929,6 +988,8 @@ spi10: spi@a88000 { > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -955,6 +1016,8 @@ spi11: spi@a8c000 { > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -981,6 +1044,8 @@ spi12: spi@a90000 { > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -992,6 +1057,8 @@ uart12: serial@a90000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart12_default>; > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -1018,6 +1085,8 @@ spi13: spi@a94000 { > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SM8250_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; > -- > 2.28.0 >
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index c989bc1370ab..6cd45a667ba9 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -411,6 +411,25 @@ ipcc: mailbox@408000 { #mbox-cells = <2>; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -445,6 +464,8 @@ spi14: spi@880000 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -471,6 +492,8 @@ spi15: spi@884000 { interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -497,6 +520,8 @@ spi16: spi@888000 { interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -523,6 +548,8 @@ spi17: spi@88c000 { interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -534,6 +561,8 @@ uart17: serial@88c000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart17_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -560,6 +589,8 @@ spi18: spi@890000 { interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -571,6 +602,8 @@ uart18: serial@890000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart18_default>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -597,6 +630,8 @@ spi19: spi@894000 { interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -635,6 +670,8 @@ spi0: spi@980000 { interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -661,6 +698,8 @@ spi1: spi@984000 { interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -687,6 +726,8 @@ spi2: spi@988000 { interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -698,6 +739,8 @@ uart2: serial@988000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -724,6 +767,8 @@ spi3: spi@98c000 { interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -750,6 +795,8 @@ spi4: spi@990000 { interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -776,6 +823,8 @@ spi5: spi@994000 { interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -802,6 +851,8 @@ spi6: spi@998000 { interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -813,6 +864,8 @@ uart6: serial@998000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -839,6 +892,8 @@ spi7: spi@99c000 { interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -877,6 +932,8 @@ spi8: spi@a80000 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -903,6 +960,8 @@ spi9: spi@a84000 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -929,6 +988,8 @@ spi10: spi@a88000 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -955,6 +1016,8 @@ spi11: spi@a8c000 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -981,6 +1044,8 @@ spi12: spi@a90000 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -992,6 +1057,8 @@ uart12: serial@a90000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1018,6 +1085,8 @@ spi13: spi@a94000 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SM8250_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; };
qup has a requirement to vote on the performance state of the CX domain in sm8250 devices. Add OPP tables for these and also add power-domains property for all qup instances for uart and spi. i2c does not support scaling and uses a fixed clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 69 ++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+)