| Message ID | 20200905103233.16922-1-linus.walleij@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next] net: dsa: rtl8366: Properly clear member config | expand |
On Sat, 5 Sep 2020 12:32:33 +0200 Linus Walleij wrote: > When removing a port from a VLAN we are just erasing the > member config for the VLAN, which is wrong: other ports > can be using it. > > Just mask off the port and only zero out the rest of the > member config once ports using of the VLAN are removed > from it. > > Reported-by: Florian Fainelli <f.fainelli@gmail.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> I see you labeled this for net-net, but it reads like a fix, is it not? Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Like commit 15ab7906cc92 ("net: dsa: rtl8366: Fix VLAN semantics") had? > diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c > index 2dcde7a91721..bd3c947976ce 100644 > --- a/drivers/net/dsa/rtl8366.c > +++ b/drivers/net/dsa/rtl8366.c > @@ -471,13 +471,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, > return ret; > > if (vid == vlanmc.vid) { > - /* clear VLAN member configurations */ > - vlanmc.vid = 0; > - vlanmc.priority = 0; > - vlanmc.member = 0; > - vlanmc.untag = 0; > - vlanmc.fid = 0; > - > + /* Remove this port from the VLAN */ > + vlanmc.member &= ~BIT(port); > + vlanmc.untag &= ~BIT(port); > + /* > + * If no ports are members of this VLAN > + * anymore then clear the whole member > + * config so it can be reused. > + */ > + if (!vlanmc.member && vlanmc.untag) { > + vlanmc.vid = 0; > + vlanmc.priority = 0; > + vlanmc.fid = 0; > + } > ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); > if (ret) { > dev_err(smi->dev,
On Sun, Sep 6, 2020 at 7:41 PM Jakub Kicinski <kuba@kernel.org> wrote: > On Sat, 5 Sep 2020 12:32:33 +0200 Linus Walleij wrote: > > When removing a port from a VLAN we are just erasing the > > member config for the VLAN, which is wrong: other ports > > can be using it. > > > > Just mask off the port and only zero out the rest of the > > member config once ports using of the VLAN are removed > > from it. > > > > Reported-by: Florian Fainelli <f.fainelli@gmail.com> > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > > I see you labeled this for net-net, but it reads like a fix, is it not? > > Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") > > Like commit 15ab7906cc92 ("net: dsa: rtl8366: Fix VLAN semantics") had? Yes you're right, also it is pretty separate from the other patches to this driver so there shouldn't be any annoying conflicts. If you're applying the patch could you add it in the process, or do you want me to resend? Yours, Linus Walleij
On Sun, 6 Sep 2020 21:23:37 +0200 Linus Walleij wrote: > On Sun, Sep 6, 2020 at 7:41 PM Jakub Kicinski <kuba@kernel.org> wrote: > > On Sat, 5 Sep 2020 12:32:33 +0200 Linus Walleij wrote: > > > When removing a port from a VLAN we are just erasing the > > > member config for the VLAN, which is wrong: other ports > > > can be using it. > > > > > > Just mask off the port and only zero out the rest of the > > > member config once ports using of the VLAN are removed > > > from it. > > > > > > Reported-by: Florian Fainelli <f.fainelli@gmail.com> > > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > > > > I see you labeled this for net-net, but it reads like a fix, is it not? > > > > Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") > > > > Like commit 15ab7906cc92 ("net: dsa: rtl8366: Fix VLAN semantics") had? > > Yes you're right, also it is pretty separate from the other patches to > this driver so there shouldn't be any annoying conflicts. > > If you're applying the patch could you add it > in the process, or do you want me to resend? Done & applied to net, thank you!
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c index 2dcde7a91721..bd3c947976ce 100644 --- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -471,13 +471,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, return ret; if (vid == vlanmc.vid) { - /* clear VLAN member configurations */ - vlanmc.vid = 0; - vlanmc.priority = 0; - vlanmc.member = 0; - vlanmc.untag = 0; - vlanmc.fid = 0; - + /* Remove this port from the VLAN */ + vlanmc.member &= ~BIT(port); + vlanmc.untag &= ~BIT(port); + /* + * If no ports are members of this VLAN + * anymore then clear the whole member + * config so it can be reused. + */ + if (!vlanmc.member && vlanmc.untag) { + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.fid = 0; + } ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); if (ret) { dev_err(smi->dev,
When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/net/dsa/rtl8366.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) -- 2.26.2