similarity index 100%
rename from arch/arm/mach-s3c/include/plat/adc-core.h
rename to arch/arm/mach-s3c/adc-core.h
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/regulator/consumer.h>
-#include <plat/regs-adc.h>
+#include "regs-adc.h"
#include <linux/soc/samsung/s3c-adc.h>
/* This driver is designed to control the usage of the ADC block between
@@ -19,7 +19,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
#include "bast.h"
@@ -15,7 +15,7 @@
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
#include <mach/irqs.h>
#include "bast.h"
@@ -31,14 +31,14 @@
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "pm.h"
#include "common-smdk-s3c24xx.h"
@@ -10,8 +10,8 @@
#include <linux/init.h>
#include <linux/io.h>
-#include <plat/map-base.h>
-#include <plat/cpu.h>
+#include <mach/map-base.h>
+#include "cpu.h"
unsigned long samsung_cpu_id;
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/cpu.h
rename to arch/arm/mach-s3c/cpu.h
@@ -12,8 +12,8 @@
#include <linux/io.h>
#include <linux/clk.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
#include <linux/soc/samsung/s3c-cpufreq-core.h>
@@ -13,8 +13,8 @@
#include <asm/cpuidle.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
#include "regs-sys-s3c64xx.h"
#include "regs-syscon-power-s3c64xx.h"
@@ -8,7 +8,7 @@
#ifndef MACH_CRAG6410_H
#define MACH_CRAG6410_H
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
@@ -11,12 +11,12 @@
#include <linux/export.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/devs.h>
+#include "devs.h"
#include <linux/platform_data/asoc-s3c.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
@@ -11,8 +11,8 @@
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "gpio-cfg.h"
#include "backlight-s3c64xx.h"
@@ -15,10 +15,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/devs.h>
+#include "devs.h"
/* Serial port registrations */
@@ -10,7 +10,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
+#include "devs.h"
/* uart devices */
@@ -39,31 +39,31 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#ifdef CONFIG_PLAT_S3C24XX
-#include <mach/regs-s3c2443-clock.h>
+#include "regs-s3c2443-clock.h"
#endif /* CONFIG_PLAT_S3C24XX */
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/fb.h>
+#include "fb.h"
#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
+#include "keypad.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/pwm-core.h>
-#include <plat/sdhci.h>
+#include "pwm-core.h"
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/usb-phy.h>
+#include "usb-phy.h"
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/devs.h
rename to arch/arm/mach-s3c/devs.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/dma-s3c24xx.h
rename to arch/arm/mach-s3c/dma-s3c24xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/dma-s3c64xx.h
rename to arch/arm/mach-s3c/dma-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/dma.h
rename to arch/arm/mach-s3c/dma.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/fb.h
rename to arch/arm/mach-s3c/fb.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/gpio-cfg-helpers.h
rename to arch/arm/mach-s3c/gpio-cfg-helpers.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/gpio-cfg.h
rename to arch/arm/mach-s3c/gpio-cfg.h
similarity index 99%
rename from arch/arm/mach-s3c/include/plat/gpio-core.h
rename to arch/arm/mach-s3c/gpio-core.h
@@ -11,7 +11,7 @@
#define __PLAT_SAMSUNG_GPIO_CORE_H
/* Bring in machine-local definitions, especially S3C_GPIO_END */
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/gpio/driver.h>
#define GPIOCON_OFF (0x00)
similarity index 99%
rename from arch/arm/mach-s3c/include/mach/gpio-samsung-s3c24xx.h
rename to arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
@@ -14,7 +14,7 @@
#ifndef GPIO_SAMSUNG_S3C24XX_H
#define GPIO_SAMSUNG_S3C24XX_H
-#include <mach/map.h>
+#include "map.h"
/*
* GPIO sizes for various SoCs:
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/gpio-samsung-s3c64xx.h
rename to arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
@@ -27,15 +27,15 @@
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/pm.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "pm.h"
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/gpio-samsung.h
rename to arch/arm/mach-s3c/gpio-samsung.h
@@ -6,7 +6,7 @@
#ifndef __MACH_S3C24XX_GTA02_H
#define __MACH_S3C24XX_GTA02_H __FILE__
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
@@ -13,9 +13,9 @@
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include "h1940.h"
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/hardware-s3c24xx.h
rename to arch/arm/mach-s3c/hardware-s3c24xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/iic-core.h
rename to arch/arm/mach-s3c/iic-core.h
@@ -10,7 +10,7 @@
#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H
#define __ASM_ARM_ARCH_IO_S3C24XX_H
-#include <plat/map-base.h>
+#include <mach/map-base.h>
/*
* ISA style IO, for each machine to sort out mappings for,
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/map-base.h
rename to arch/arm/mach-s3c/include/mach/map-base.h
@@ -23,8 +23,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
static struct cpu_table *cpu;
@@ -14,8 +14,8 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
#include <linux/soc/samsung/s3c-cpufreq-core.h>
@@ -23,10 +23,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <mach/s3c2412.h>
+#include "s3c2412.h"
#define print_ns(x) ((x) / 10), ((x) % 10)
@@ -13,14 +13,14 @@
#include <linux/syscore_ops.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/pm-core.h>
+#include "cpu.h"
+#include "pm.h"
+#include <mach/map-base.h>
+#include "map-s3c.h"
+
+#include "regs-irq.h"
+#include "regs-gpio.h"
+#include "pm-core.h"
#include <asm/irq.h>
@@ -20,11 +20,11 @@
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "regs-gpio.h"
+#include "cpu.h"
+#include "pm.h"
/* We handled all the IRQ types in this code, to save having to make several
* small files to handle each different type separately. Having the EINT_GRP
@@ -10,8 +10,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
-#include <mach/regs-irq.h>
+#include "map.h"
+#include "regs-irq.h"
#include <linux/spi/s3c24xx-fiq.h>
@@ -26,12 +26,12 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
+#include "regs-irq.h"
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "regs-irqtype.h"
+#include "pm.h"
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/keypad.h
rename to arch/arm/mach-s3c/keypad.h
@@ -31,13 +31,13 @@
#include <asm/mach-types.h>
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "cpu.h"
+#include "gpio-cfg.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -27,8 +27,8 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -39,8 +39,8 @@
#include <net/ax88796.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include "anubis.h"
@@ -30,19 +30,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include "s3c64xx.h"
#include "regs-modem-s3c64xx.h"
@@ -28,8 +28,8 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -38,8 +38,8 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3c24xx.h"
@@ -41,13 +41,13 @@
#include <asm/mach-types.h>
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
+#include "cpu.h"
#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "gpio-cfg.h"
#include "bast.h"
#include "s3c24xx.h"
@@ -27,7 +27,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
#include "crag6410.h"
@@ -44,22 +44,22 @@
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "sdhci.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/keypad.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "keypad.h"
+#include "devs.h"
+#include "cpu.h"
#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pm.h>
+#include "pm.h"
#include "s3c64xx.h"
#include "crag6410.h"
@@ -59,14 +59,14 @@
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "gta02.h"
@@ -48,16 +48,16 @@
#include <sound/uda1380.h>
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/map.h>
-#include <mach/hardware-s3c24xx.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
+#include "map.h"
+#include "hardware-s3c24xx.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "h1940.h"
@@ -25,19 +25,19 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/fb.h>
+#include "gpio-samsung.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c64xx.h"
@@ -31,10 +31,10 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/hardware-s3c24xx.h>
-#include <mach/regs-gpio.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <asm/mach-types.h>
@@ -43,10 +43,10 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include "s3c24xx.h"
@@ -33,10 +33,10 @@
#include <linux/platform_data/fb-s3c2410.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/irqs.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -47,9 +47,9 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <sound/s3c24xx_uda134x.h>
@@ -23,17 +23,17 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/soc/samsung/s3c-adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <mach/irqs.h>
@@ -27,15 +27,15 @@
#include <linux/io.h>
#include <linux/mmc/host.h>
-#include <mach/hardware-s3c24xx.h>
+#include "hardware-s3c24xx.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
@@ -43,9 +43,8 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
@@ -25,16 +25,16 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c64xx.h"
@@ -32,13 +32,13 @@
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
@@ -15,7 +15,7 @@
#include <linux/mfd/tps65010.h>
#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
@@ -36,13 +36,13 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "gpio-cfg.h"
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include "s3c24xx.h"
#include "osiris.h"
@@ -22,12 +22,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
#include "s3c24xx.h"
#include "otom.h"
@@ -36,12 +36,12 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -24,15 +24,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
#include <linux/soc/samsung/s3c-adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
@@ -46,14 +46,14 @@
#include <sound/uda1380.h>
-#include <mach/hardware-s3c24xx.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
#include "s3c24xx.h"
#include "h1940.h"
@@ -35,13 +35,13 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "h1940.h"
@@ -16,10 +16,10 @@
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
#include "s3c24xx.h"
@@ -8,8 +8,8 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
#include "s3c64xx.h"
@@ -18,17 +18,17 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
@@ -15,14 +15,14 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
#include "s3c64xx.h"
#include "mach-smartq.h"
@@ -15,14 +15,14 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
#include "s3c64xx.h"
#include "mach-smartq.h"
@@ -19,8 +19,8 @@
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -31,8 +31,8 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -23,23 +23,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware-s3c24xx.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -25,26 +25,26 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware-s3c24xx.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "regs-s3c2443-clock.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
-#include <plat/fb.h>
+#include "fb.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -26,15 +26,15 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -25,13 +25,13 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
#include "common-smdk-s3c24xx.h"
@@ -23,12 +23,12 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include "s3c64xx.h"
@@ -46,23 +46,23 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/keypad.h>
+#include "keypad.h"
#include "backlight-s3c64xx.h"
#include "s3c64xx.h"
@@ -29,8 +29,8 @@
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -35,12 +35,12 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
#include "bast.h"
#include "s3c24xx.h"
@@ -28,17 +28,17 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include "s3c24xx.h"
similarity index 97%
rename from arch/arm/mach-s3c/include/plat/map-s3c.h
rename to arch/arm/mach-s3c/map-s3c.h
@@ -9,7 +9,7 @@
#ifndef __ASM_PLAT_MAP_S3C_H
#define __ASM_PLAT_MAP_S3C_H __FILE__
-#include <mach/map.h>
+#include "map.h"
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
@@ -65,6 +65,6 @@ extern void __iomem *s3c24xx_va_gpio2;
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
-#include <plat/map-s5p.h>
+#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */
similarity index 98%
rename from arch/arm/mach-s3c/include/mach/map-s3c24xx.h
rename to arch/arm/mach-s3c/map-s3c24xx.h
@@ -9,8 +9,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* interrupt controller is the first thing we put in, to make
similarity index 98%
rename from arch/arm/mach-s3c/include/mach/map-s3c64xx.h
rename to arch/arm/mach-s3c/map-s3c64xx.h
@@ -11,8 +11,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* Post-mux Chip Select Regions Xm0CSn_
similarity index 94%
rename from arch/arm/mach-s3c/include/plat/map-s5p.h
rename to arch/arm/mach-s3c/map-s5p.h
@@ -15,6 +15,6 @@
#define VA_VIC2 VA_VIC(2)
#define VA_VIC3 VA_VIC(3)
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#endif /* __ASM_PLAT_MAP_S5P_H */
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/map.h
rename to arch/arm/mach-s3c/map.h
@@ -10,9 +10,9 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
#include "regs-sys-s3c64xx.h"
@@ -9,8 +9,8 @@
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
+#include "devs.h"
+#include "sdhci.h"
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
@@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
-#include <plat/pm-common.h>
+#include "pm-common.h"
/* helper functions to save and restore register state */
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/pm-common.h
rename to arch/arm/mach-s3c/pm-common.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/pm-core-s3c24xx.h
rename to arch/arm/mach-s3c/pm-core-s3c24xx.h
similarity index 96%
rename from arch/arm/mach-s3c/include/mach/pm-core-s3c64xx.h
rename to arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -14,9 +14,9 @@
#include <linux/serial_s3c.h>
#include <linux/delay.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/map.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "map.h"
static inline void s3c_pm_debug_init_uart(void)
{
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/pm-core.h
rename to arch/arm/mach-s3c/pm-core.h
@@ -13,10 +13,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "pm.h"
/* PM GPIO helpers */
@@ -7,9 +7,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
.text
.global h1940_pm_return
@@ -16,12 +16,12 @@
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
#include "h1940.h"
@@ -20,11 +20,11 @@
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "pm.h"
+#include "wakeup-mask.h"
#include "regs-dsc-s3c24xx.h"
#include "s3c2412-power.h"
@@ -11,10 +11,10 @@
#include <asm/cacheflush.h>
-#include <mach/regs-s3c2443-clock.h>
+#include "regs-s3c2443-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
#include "s3c2412-power.h"
@@ -21,15 +21,15 @@
#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
#include <asm/mach/time.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "pm.h"
#include "regs-mem-s3c24xx.h"
@@ -14,17 +14,17 @@
#include <linux/gpio.h>
#include <linux/pm_domain.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "wakeup-mask.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "gpio-samsung.h"
#include "regs-gpio-memport-s3c64xx.h"
#include "regs-modem-s3c64xx.h"
@@ -18,16 +18,16 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-irq.h"
#include <mach/irqs.h>
#include <asm/irq.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <mach/pm-core.h>
+#include "cpu.h"
+#include "pm.h"
+#include "pm-core.h"
/* for external use */
similarity index 98%
rename from arch/arm/mach-s3c/include/plat/pm.h
rename to arch/arm/mach-s3c/pm.h
@@ -11,7 +11,7 @@
* management
*/
-#include <plat/pm-common.h>
+#include "pm-common.h"
struct device;
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/pwm-core.h
rename to arch/arm/mach-s3c/pwm-core.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/regs-adc.h
rename to arch/arm/mach-s3c/regs-adc.h
similarity index 99%
rename from arch/arm/mach-s3c/include/mach/regs-clock-s3c24xx.h
rename to arch/arm/mach-s3c/regs-clock-s3c24xx.h
@@ -9,7 +9,7 @@
#ifndef __ASM_ARM_REGS_CLOCK
#define __ASM_ARM_REGS_CLOCK
-#include <mach/map.h>
+#include "map.h"
#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-clock-s3c64xx.h
rename to arch/arm/mach-s3c/regs-clock-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-clock.h
rename to arch/arm/mach-s3c/regs-clock.h
similarity index 99%
rename from arch/arm/mach-s3c/include/mach/regs-gpio-s3c24xx.h
rename to arch/arm/mach-s3c/regs-gpio-s3c24xx.h
@@ -10,7 +10,7 @@
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-gpio-s3c64xx.h
rename to arch/arm/mach-s3c/regs-gpio-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-gpio.h
rename to arch/arm/mach-s3c/regs-gpio.h
similarity index 98%
rename from arch/arm/mach-s3c/include/mach/regs-irq-s3c24xx.h
rename to arch/arm/mach-s3c/regs-irq-s3c24xx.h
@@ -8,7 +8,7 @@
#ifndef ___ASM_ARCH_REGS_IRQ_H
#define ___ASM_ARCH_REGS_IRQ_H
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
/* interrupt controller */
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-irq-s3c64xx.h
rename to arch/arm/mach-s3c/regs-irq-s3c64xx.h
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/regs-irq.h
rename to arch/arm/mach-s3c/regs-irq.h
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/regs-irqtype.h
rename to arch/arm/mach-s3c/regs-irqtype.h
@@ -9,7 +9,7 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
similarity index 99%
rename from arch/arm/mach-s3c/include/mach/regs-s3c2443-clock.h
rename to arch/arm/mach-s3c/regs-s3c2443-clock.h
@@ -11,7 +11,7 @@
#define __ASM_ARM_REGS_S3C2443_CLOCK
#include <linux/delay.h>
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
similarity index 100%
rename from arch/arm/mach-s3c/include/mach/rtc-core-s3c24xx.h
rename to arch/arm/mach-s3c/rtc-core-s3c24xx.h
@@ -25,21 +25,21 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
#include "s3c24xx.h"
@@ -29,13 +29,13 @@
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "nand-core-s3c24xx.h"
similarity index 96%
rename from arch/arm/mach-s3c/include/mach/s3c2412.h
rename to arch/arm/mach-s3c/s3c2412.h
@@ -8,7 +8,7 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
@@ -26,25 +26,25 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core-s3c24xx.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/sdhci.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "sdhci.h"
+#include "pm.h"
-#include <plat/iic-core.h>
-#include <plat/adc-core.h>
+#include "iic-core.h"
+#include "adc-core.h"
#include "s3c24xx.h"
#include "fb-core-s3c24xx.h"
@@ -23,16 +23,16 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio-samsung.h>
#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
#include "s3c24xx.h"
@@ -21,18 +21,18 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/gpio-samsung.h>
#include <linux/atomic.h>
#include <asm/irq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
#include "s3c24xx.h"
@@ -23,21 +23,21 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core-s3c24xx.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc-core.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "adc-core.h"
#include "s3c24xx.h"
#include "fb-core-s3c24xx.h"
@@ -25,15 +25,15 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
#include "s3c24xx.h"
#include "nand-core-s3c24xx.h"
@@ -22,9 +22,9 @@
#include <linux/dmaengine.h>
#include <linux/clk/samsung.h>
-#include <mach/hardware-s3c24xx.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "hardware-s3c24xx.h"
+#include "map.h"
+#include "regs-clock.h"
#include <asm/irq.h>
#include <asm/cacheflush.h>
#include <asm/system_info.h>
@@ -33,12 +33,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/dma.h>
+#include "regs-gpio.h"
+#include "dma-s3c24xx.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pwm-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pwm-core.h"
#include "s3c24xx.h"
@@ -28,12 +28,12 @@
#include <asm/irq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "iic-core.h"
#include "s3c64xx.h"
#include "onenand-core-s3c64xx.h"
@@ -30,13 +30,13 @@
#include <asm/irq.h>
#include <linux/soc/samsung/s3c-pm.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "adc-core.h"
+#include "iic-core.h"
#include "ata-core-s3c64xx.h"
#include "s3c64xx.h"
@@ -35,18 +35,17 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+#include "pwm-core.h"
+#include "regs-irqtype.h"
#include "s3c64xx.h"
#include "irq-uart-s3c64xx.h"
similarity index 99%
rename from arch/arm/mach-s3c/include/plat/sdhci.h
rename to arch/arm/mach-s3c/sdhci.h
@@ -15,7 +15,7 @@
#define __PLAT_S3C_SDHCI_H __FILE__
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/devs.h>
+#include "devs.h"
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
@@ -5,8 +5,8 @@
// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
#include <media/drv-intf/s3c_camif.h>
/* Number of camera port pins, without FIELD */
@@ -12,9 +12,9 @@
#include <linux/fb.h>
#include <linux/gpio.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "fb.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c64xx_fb_gpio_setup_24bpp(void)
{
@@ -10,10 +10,11 @@
struct platform_device;
-#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
@@ -9,12 +9,13 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
@@ -6,9 +6,9 @@
// GPIO configuration for S3C64XX KeyPad device
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "keypad.h"
+#include "gpio-samsung.h"
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
@@ -14,10 +14,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+#include "sdhci.h"
void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
@@ -13,9 +13,9 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "sdhci.h"
+#include "gpio-samsung.h"
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
@@ -8,10 +8,10 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
-#include <mach/hardware-s3c24xx.h>
-#include <mach/regs-gpio.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
@@ -5,8 +5,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
@@ -12,8 +12,8 @@ struct platform_device; /* don't need the contents */
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
/**
* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
@@ -8,9 +8,9 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
+#include "map.h"
+#include "cpu.h"
+#include "usb-phy.h"
#include "regs-sys-s3c64xx.h"
#include "regs-usb-hsotg-phy-s3c64xx.h"
@@ -12,12 +12,12 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
@@ -21,7 +21,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include "bast.h"
#include "simtec.h"
@@ -19,12 +19,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
+#include "map.h"
+#include "regs-gpio.h"
#include <asm/mach-types.h>
-#include <plat/pm.h>
+#include "pm.h"
#include "regs-mem-s3c24xx.h"
@@ -23,12 +23,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <mach/irqs.h>
#include <asm/irq.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
@@ -13,10 +13,10 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
#include "regs-mem-s3c24xx.h"
@@ -8,9 +8,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
.text
@@ -13,10 +13,10 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
/*
* S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
@@ -11,12 +11,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
#undef S3C64XX_VA_GPIO
#define S3C64XX_VA_GPIO (0x0)
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/usb-phy.h
rename to arch/arm/mach-s3c/usb-phy.h
@@ -11,8 +11,8 @@
#include <linux/irq.h>
#include <linux/io.h>
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
+#include "wakeup-mask.h"
+#include "pm.h"
void samsung_sync_wakemask(void __iomem *reg,
const struct samsung_wakeup_mask *mask, int nr_mask)
similarity index 100%
rename from arch/arm/mach-s3c/include/plat/wakeup-mask.h
rename to arch/arm/mach-s3c/wakeup-mask.h