@@ -400,10 +400,14 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
u32 num_viewport = ks_pcie->num_viewport;
struct dw_pcie *pci = ks_pcie->pci;
struct pcie_port *pp = &pci->pp;
- u64 start = pp->mem->start;
- u64 end = pp->mem->end;
+ u64 start, end;
+ struct resource *mem;
int i;
+ mem = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM)->res;
+ start = mem->start;
+ end = mem->end;
+
/* Disable BARs for inbound access */
ks_pcie_set_dbi_mode(ks_pcie);
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
@@ -265,6 +265,7 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
u8 secondary_bus;
u32 cfg_control;
u32 reg;
+ struct resource *bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS)->res;
target_bus_cfg = &pcie->target_bus_cfg;
@@ -278,13 +279,13 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
target_bus_cfg->ecam_mask = ecam_bus_mask;
/* This portion is taken from the cfg_target_bus reg */
target_bus_cfg->reg_mask = ~target_bus_cfg->ecam_mask;
- target_bus_cfg->reg_val = pp->busn->start & target_bus_cfg->reg_mask;
+ target_bus_cfg->reg_val = bus->start & target_bus_cfg->reg_mask;
al_pcie_target_bus_set(pcie, target_bus_cfg->reg_val,
target_bus_cfg->reg_mask);
- secondary_bus = pp->busn->start + 1;
- subordinate_bus = pp->busn->end;
+ secondary_bus = bus->start + 1;
+ subordinate_bus = bus->end;
/* Set the valid values of secondary and subordinate buses */
cfg_control_offset = AXI_BASE_OFFSET + pcie->reg_offsets.ob_ctrl +
@@ -331,17 +331,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
resource_list_for_each_entry(win, &bridge->windows) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
- pp->io = win->res;
- pp->io->name = "I/O";
- pp->io_size = resource_size(pp->io);
- pp->io_bus_addr = pp->io->start - win->offset;
- pp->io_base = pci_pio_to_address(pp->io->start);
- break;
- case IORESOURCE_MEM:
- pp->mem = win->res;
- pp->mem->name = "MEM";
- pp->mem_size = resource_size(pp->mem);
- pp->mem_bus_addr = pp->mem->start - win->offset;
+ pp->io_size = resource_size(win->res);
+ pp->io_bus_addr = win->res->start - win->offset;
+ pp->io_base = pci_pio_to_address(win->res->start);
break;
case 0:
pp->cfg = win->res;
@@ -350,9 +342,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_base = pp->cfg->start;
pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
break;
- case IORESOURCE_BUS:
- pp->busn = win->res;
- break;
}
}
@@ -366,8 +355,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
}
- pp->mem_base = pp->mem->start;
-
if (!pp->va_cfg0_base) {
pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
pp->cfg0_base, pp->cfg0_size);
@@ -438,8 +425,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
goto err_free_msi;
}
- pp->root_bus_nr = pp->busn->start;
-
bridge->dev.parent = dev;
bridge->sysdata = pp;
bridge->busnr = pp->root_bus_nr;
@@ -623,9 +608,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
* ATU, so we should not program the ATU here.
*/
if (pp->bridge->child_ops == &dw_child_pcie_ops) {
+ struct resource_entry *entry =
+ resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
+
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_TYPE_MEM, pp->mem_base,
- pp->mem_bus_addr, pp->mem_size);
+ PCIE_ATU_TYPE_MEM, entry->res->start,
+ entry->res->start - entry->offset,
+ resource_size(entry->res));
if (pci->num_viewport > 2)
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX2,
PCIE_ATU_TYPE_IO, pp->io_base,
@@ -176,13 +176,7 @@ struct pcie_port {
resource_size_t io_base;
phys_addr_t io_bus_addr;
u32 io_size;
- u64 mem_base;
- phys_addr_t mem_bus_addr;
- u32 mem_size;
struct resource *cfg;
- struct resource *io;
- struct resource *mem;
- struct resource *busn;
int irq;
const struct dw_pcie_host_ops *ops;
int msi_irq;
The PCI bridge resources are stored in pci_host_bridge.windows, so there's no need to store them in a DWC specific struct. There's also no need to parse the resources and store them a 2nd time as they are mainly used for one time setup of iATU windows. Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pci-keystone.c | 8 +++-- drivers/pci/controller/dwc/pcie-al.c | 7 +++-- .../pci/controller/dwc/pcie-designware-host.c | 29 ++++++------------- drivers/pci/controller/dwc/pcie-designware.h | 6 ---- 4 files changed, 19 insertions(+), 31 deletions(-) -- 2.25.1