@@ -454,15 +454,19 @@ static struct pci_ops ks_child_pcie_ops = {
};
/**
- * ks_pcie_v3_65_scan_bus() - keystone scan_bus post initialization
+ * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization
*
* This sets BAR0 to enable inbound access for MSI_IRQ register
*/
-static void ks_pcie_v3_65_scan_bus(struct pcie_port *pp)
+static int ks_pcie_v3_65_add_bus(struct pci_bus *bus)
{
+ struct pcie_port *pp = bus->sysdata;
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+ if (!pci_is_root_bus(bus))
+ return 0;
+
/* Configure and set up BAR0 */
ks_pcie_set_dbi_mode(ks_pcie);
@@ -477,12 +481,15 @@ static void ks_pcie_v3_65_scan_bus(struct pcie_port *pp)
* be sufficient. Use physical address to avoid any conflicts.
*/
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
+
+ return 0;
}
static struct pci_ops ks_pcie_ops = {
.map_bus = dw_pcie_own_conf_map_bus,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
+ .add_bus = ks_pcie_v3_65_add_bus,
};
/**
@@ -842,7 +849,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
static const struct dw_pcie_host_ops ks_pcie_host_ops = {
.host_init = ks_pcie_host_init,
.msi_host_init = ks_pcie_msi_host_init,
- .scan_bus = ks_pcie_v3_65_scan_bus,
};
static const struct dw_pcie_host_ops ks_pcie_am654_host_ops = {
TI keystone is the only Designware driver using .scan_bus(). This function pointer is the only thing preventing the Designware driver from using pci_host_probe(). Let's use the pci_ops.add_bus hook instead. Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pci-keystone.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) -- 2.25.1