| Message ID | 1596297341-13549-1-git-send-email-amit.pundir@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v3] arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium) | expand |
On Sat 01 Aug 08:55 PDT 2020, Amit Pundir wrote: > Add initial dts support for Xiaomi Poco F1 (Beryllium). > > This initial support is based on upstream Dragonboard 845c > (sdm845) device. With this dts, Beryllium boots AOSP up to > ADB shell over USB-C. > > Supported functionality includes UFS, USB-C (peripheral), > microSD card and Vol+/Vol-/power keys. Bluetooth should work > too but couldn't be verified from adb command line, it is > verified when enabled from UI with few WIP display patches. > > Just like initial db845c support, initializing the SMMU is > clearing the mapping used for the splash screen framebuffer, > which causes the device to hang during boot and recovery > needs a hard power reset. This can be worked around using: > > fastboot oem select-display-panel none > > To switch ON the display back run: > > fastboot oem select-display-panel > > But this only works on Beryllium devices running bootloader > version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with > Android-9 based release. Newer bootloader version do not > support switching OFF the display panel at all. So we need > a few additional smmu patches (under review) from here to > boot to shell: > https://github.com/pundiramit/linux/commits/beryllium-mainline > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org> > --- > v3: Added a reserved-memory region from downstream kernel to fix > a boot regression with recent dma-pool changes in v5.8-rc6. > v2: Updated machine compatible string for seemingly inevitable > future quirks. > > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sdm845-beryllium.dts | 331 ++++++++++++++++++++++++++ > 2 files changed, 332 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 0f2c33d611df..3ef1b48bc0cb 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sdm845-beryllium.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > new file mode 100644 > index 000000000000..af66459712fe > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > @@ -0,0 +1,331 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sdm845.dtsi" > +#include "pm8998.dtsi" > +#include "pmi8998.dtsi" > + > +/ { > + model = "Xiaomi Technologies Inc. Beryllium"; > + compatible = "xiaomi,beryllium", "qcom,sdm845"; > + > + /* required for bootloader to select correct board */ > + qcom,board-id = <69 0>; > + qcom,msm-id = <321 0x20001>; > + > + aliases { > + hsuart0 = &uart6; > + }; > + > + dc12v: dc12v-regulator { This is a phone, it doesn't have a 12V DC jack. So while I don't know the exact power grid for this device, this node shouldn't be here. > + compatible = "regulator-fixed"; > + regulator-name = "DC12V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-always-on; > + }; > + > + gpio_keys { y/_/-/ > + compatible = "gpio-keys"; > + autorepeat; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&vol_up_pin_a>; > + > + vol-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + vbat: vbat-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VBAT"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <4200000>; > + regulator-max-microvolt = <4200000>; > + regulator-always-on; > + }; > + > + vbat_som: vbat-som-regulator { This is specific to db845c, with its power grid split between the main board and the SOM. Please omit. > + compatible = "regulator-fixed"; > + regulator-name = "VBAT_SOM"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <4200000>; > + regulator-max-microvolt = <4200000>; > + regulator-always-on; > + }; > + > + vdc_3v3: vdc-3v3-regulator { This is probably not on the Poco and it's not referenced, please remove. > + compatible = "regulator-fixed"; > + regulator-name = "VDC_3V3"; > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdc_5v: vdc-5v-regulator { Ditto. > + compatible = "regulator-fixed"; > + regulator-name = "VDC_5V"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <500000>; > + regulator-always-on; > + }; > + > + vreg_s4a_1p8: vreg-s4a-1p8 { > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s4a_1p8"; > + > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > +}; > + > +&apps_rsc { > + pm8998-rpmh-regulators { > + compatible = "qcom,pm8998-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vreg_l1a_0p875: ldo1 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a_2p95: ldo13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17a_1p3: ldo17 { > + regulator-min-microvolt = <1304000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l20a_2p95: ldo20 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2968000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l21a_2p95: ldo21 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2968000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l24a_3p075: ldo24 { > + regulator-min-microvolt = <3088000>; > + regulator-max-microvolt = <3088000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l25a_3p3: ldo25 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l26a_1p2: ldo26 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&gcc { > + protected-clocks = <GCC_QSPI_CORE_CLK>, > + <GCC_QSPI_CORE_CLK_SRC>, > + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; > +}; > + > +/* Reserved memory changes from downstream */ > +/ { > + reserved-memory { > + removed_region: memory@88f00000 { Do you know what these 26MB are used for? Do you think it's possible to give it a more appropriate label? The size happens to be the same as &adsp_mem from sdm845.dtsi, this is probably not a coincidence. That said, this overlaps at least &rmtfs_mem, &qseecom_mem and &camera_mem, so I would expect that you have a few warnings about this early in the log? Please shuffle things around to avoid this. > + no-map; > + reg = <0 0x88f00000 0 0x1A00000>; Please lowercase the 'A' Regards, Bjorn > + }; > + }; > +}; > + > +&pm8998_gpio { > + vol_up_pin_a: vol-up-active { > + pins = "gpio6"; > + function = "normal"; > + input-enable; > + bias-pull-up; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > + }; > +}; > + > +&pm8998_pon { > + resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; > + > + vmmc-supply = <&vreg_l21a_2p95>; > + vqmmc-supply = <&vreg_l13a_2p95>; > + > + bus-width = <4>; > + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <81 4>; > + > + sdc2_default_state: sdc2-default { > + clk { > + pins = "sdc2_clk"; > + bias-disable; > + > + /* > + * It seems that mmc_test reports errors if drive > + * strength is not 16 on clk, cmd, and data pins. > + */ > + drive-strength = <16>; > + }; > + > + cmd { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + }; > + > + sdc2_card_det_n: sd-card-det-n { > + pins = "gpio126"; > + function = "gpio"; > + bias-pull-up; > + }; > +}; > + > +&uart6 { > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn3990-bt"; > + > + vddio-supply = <&vreg_s4a_1p8>; > + vddxo-supply = <&vreg_l7a_1p8>; > + vddrf-supply = <&vreg_l17a_1p3>; > + vddch0-supply = <&vreg_l25a_3p3>; > + max-speed = <3200000>; > + }; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_1_hsphy { > + status = "okay"; > + > + vdd-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l12a_1p8>; > + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; > + > + qcom,imp-res-offset-value = <8>; > + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; > + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; > + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; > +}; > + > +&usb_1_qmpphy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l26a_1p2>; > + vdda-pll-supply = <&vreg_l1a_0p875>; > +}; > + > +&ufs_mem_hc { > + status = "okay"; > + > + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l20a_2p95>; > + vcc-max-microamp = <800000>; > +}; > + > +&ufs_mem_phy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l26a_1p2>; > +}; > + > +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ > + > +&qup_uart6_default { > + pinmux { > + pins = "gpio45", "gpio46", "gpio47", "gpio48"; > + function = "qup6"; > + }; > + > + cts { > + pins = "gpio45"; > + bias-disable; > + }; > + > + rts-tx { > + pins = "gpio46", "gpio47"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + rx { > + pins = "gpio48"; > + bias-pull-up; > + }; > +}; > -- > 2.7.4 >
On Tue, 4 Aug 2020 at 11:46, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Sat 01 Aug 08:55 PDT 2020, Amit Pundir wrote: > > > Add initial dts support for Xiaomi Poco F1 (Beryllium). > > > > This initial support is based on upstream Dragonboard 845c > > (sdm845) device. With this dts, Beryllium boots AOSP up to > > ADB shell over USB-C. > > > > Supported functionality includes UFS, USB-C (peripheral), > > microSD card and Vol+/Vol-/power keys. Bluetooth should work > > too but couldn't be verified from adb command line, it is > > verified when enabled from UI with few WIP display patches. > > > > Just like initial db845c support, initializing the SMMU is > > clearing the mapping used for the splash screen framebuffer, > > which causes the device to hang during boot and recovery > > needs a hard power reset. This can be worked around using: > > > > fastboot oem select-display-panel none > > > > To switch ON the display back run: > > > > fastboot oem select-display-panel > > > > But this only works on Beryllium devices running bootloader > > version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with > > Android-9 based release. Newer bootloader version do not > > support switching OFF the display panel at all. So we need > > a few additional smmu patches (under review) from here to > > boot to shell: > > https://github.com/pundiramit/linux/commits/beryllium-mainline > > > > Signed-off-by: Amit Pundir <amit.pundir@linaro.org> > > --- > > v3: Added a reserved-memory region from downstream kernel to fix > > a boot regression with recent dma-pool changes in v5.8-rc6. > > v2: Updated machine compatible string for seemingly inevitable > > future quirks. > > > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > arch/arm64/boot/dts/qcom/sdm845-beryllium.dts | 331 ++++++++++++++++++++++++++ > > 2 files changed, 332 insertions(+) > > create mode 100644 arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > index 0f2c33d611df..3ef1b48bc0cb 100644 > > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += sdm845-beryllium.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > > new file mode 100644 > > index 000000000000..af66459712fe > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts > > @@ -0,0 +1,331 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > +#include "sdm845.dtsi" > > +#include "pm8998.dtsi" > > +#include "pmi8998.dtsi" > > + > > +/ { > > + model = "Xiaomi Technologies Inc. Beryllium"; > > + compatible = "xiaomi,beryllium", "qcom,sdm845"; > > + > > + /* required for bootloader to select correct board */ > > + qcom,board-id = <69 0>; > > + qcom,msm-id = <321 0x20001>; > > + > > + aliases { > > + hsuart0 = &uart6; > > + }; > > + > > + dc12v: dc12v-regulator { > > This is a phone, it doesn't have a 12V DC jack. So while I don't know > the exact power grid for this device, this node shouldn't be here. Ack. Will remove it in next version. > > > + compatible = "regulator-fixed"; > > + regulator-name = "DC12V"; > > + regulator-min-microvolt = <12000000>; > > + regulator-max-microvolt = <12000000>; > > + regulator-always-on; > > + }; > > + > > + gpio_keys { > > y/_/-/ Ack. > > > + compatible = "gpio-keys"; > > + autorepeat; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&vol_up_pin_a>; > > + > > + vol-up { > > + label = "Volume Up"; > > + linux,code = <KEY_VOLUMEUP>; > > + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; > > + }; > > + }; > > + > > + vbat: vbat-regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "VBAT"; > > + > > + vin-supply = <&dc12v>; > > + regulator-min-microvolt = <4200000>; > > + regulator-max-microvolt = <4200000>; > > + regulator-always-on; > > + }; > > + > > + vbat_som: vbat-som-regulator { > > This is specific to db845c, with its power grid split between the main > board and the SOM. Please omit. Ack. > > > + compatible = "regulator-fixed"; > > + regulator-name = "VBAT_SOM"; > > + > > + vin-supply = <&dc12v>; > > + regulator-min-microvolt = <4200000>; > > + regulator-max-microvolt = <4200000>; > > + regulator-always-on; > > + }; > > + > > + vdc_3v3: vdc-3v3-regulator { > > This is probably not on the Poco and it's not referenced, please remove. Ack. > > > + compatible = "regulator-fixed"; > > + regulator-name = "VDC_3V3"; > > + vin-supply = <&dc12v>; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + }; > > + > > + vdc_5v: vdc-5v-regulator { > > Ditto. Ack. > > > + compatible = "regulator-fixed"; > > + regulator-name = "VDC_5V"; > > + > > + vin-supply = <&dc12v>; > > + regulator-min-microvolt = <500000>; > > + regulator-max-microvolt = <500000>; > > + regulator-always-on; > > + }; > > + > > + vreg_s4a_1p8: vreg-s4a-1p8 { > > + compatible = "regulator-fixed"; > > + regulator-name = "vreg_s4a_1p8"; > > + > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + }; > > +}; > > + > > +&apps_rsc { > > + pm8998-rpmh-regulators { > > + compatible = "qcom,pm8998-rpmh-regulators"; > > + qcom,pmic-id = "a"; > > + > > + vreg_l1a_0p875: ldo1 { > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l7a_1p8: ldo7 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l12a_1p8: ldo12 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l13a_2p95: ldo13 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <2960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l17a_1p3: ldo17 { > > + regulator-min-microvolt = <1304000>; > > + regulator-max-microvolt = <1304000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l20a_2p95: ldo20 { > > + regulator-min-microvolt = <2960000>; > > + regulator-max-microvolt = <2968000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l21a_2p95: ldo21 { > > + regulator-min-microvolt = <2960000>; > > + regulator-max-microvolt = <2968000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l24a_3p075: ldo24 { > > + regulator-min-microvolt = <3088000>; > > + regulator-max-microvolt = <3088000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l25a_3p3: ldo25 { > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3312000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l26a_1p2: ldo26 { > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > +}; > > + > > +&gcc { > > + protected-clocks = <GCC_QSPI_CORE_CLK>, > > + <GCC_QSPI_CORE_CLK_SRC>, > > + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; > > +}; > > + > > +/* Reserved memory changes from downstream */ > > +/ { > > + reserved-memory { > > + removed_region: memory@88f00000 { > > Do you know what these 26MB are used for? Do you think it's possible to > give it a more appropriate label? The size happens to be the same as > &adsp_mem from sdm845.dtsi, this is probably not a coincidence. In downstream, this removed region is marked as removed-dma-pool compatible, https://github.com/MiCode/Xiaomi_Kernel_OpenSource/commit/b982b6dc77ac34c184abe83dd293ac08fc607ba3, a carved out memory region not exposed to the kernel. I honestly didn't know what to name this region, so I kept it as it was. I can't boot past the bootloader if I don't mark this region as reserved. > > That said, this overlaps at least &rmtfs_mem, &qseecom_mem and > &camera_mem, so I would expect that you have a few warnings about this > early in the log? Please shuffle things around to avoid this. Sorry, I do know that it definitely overlaps with upstream &rmtfs_mem, but I ignored that because plan was to just boot to shell with this base dts. I was planning to submit a follow-up patch with downstream reserved memory mappings, which do not coincide with the upstream sdm845.dtsi mem regions you mentioned above, along with relevant wifi/adsp/cdsp nodes. But let me take this opportunity to submit them in the next version of this base dts. > > > + no-map; > > + reg = <0 0x88f00000 0 0x1A00000>; > > Please lowercase the 'A' Ack. Regards, Amit Pundir > > Regards, > Bjorn > > > + }; > > + }; > > +}; > > + > > +&pm8998_gpio { > > + vol_up_pin_a: vol-up-active { > > + pins = "gpio6"; > > + function = "normal"; > > + input-enable; > > + bias-pull-up; > > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > > + }; > > +}; > > + > > +&pm8998_pon { > > + resin { > > + compatible = "qcom,pm8941-resin"; > > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > > + debounce = <15625>; > > + bias-pull-up; > > + linux,code = <KEY_VOLUMEDOWN>; > > + }; > > +}; > > + > > +&qupv3_id_0 { > > + status = "okay"; > > +}; > > + > > +&sdhc_2 { > > + status = "okay"; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; > > + > > + vmmc-supply = <&vreg_l21a_2p95>; > > + vqmmc-supply = <&vreg_l13a_2p95>; > > + > > + bus-width = <4>; > > + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +&tlmm { > > + gpio-reserved-ranges = <0 4>, <81 4>; > > + > > + sdc2_default_state: sdc2-default { > > + clk { > > + pins = "sdc2_clk"; > > + bias-disable; > > + > > + /* > > + * It seems that mmc_test reports errors if drive > > + * strength is not 16 on clk, cmd, and data pins. > > + */ > > + drive-strength = <16>; > > + }; > > + > > + cmd { > > + pins = "sdc2_cmd"; > > + bias-pull-up; > > + drive-strength = <10>; > > + }; > > + > > + data { > > + pins = "sdc2_data"; > > + bias-pull-up; > > + drive-strength = <10>; > > + }; > > + }; > > + > > + sdc2_card_det_n: sd-card-det-n { > > + pins = "gpio126"; > > + function = "gpio"; > > + bias-pull-up; > > + }; > > +}; > > + > > +&uart6 { > > + status = "okay"; > > + > > + bluetooth { > > + compatible = "qcom,wcn3990-bt"; > > + > > + vddio-supply = <&vreg_s4a_1p8>; > > + vddxo-supply = <&vreg_l7a_1p8>; > > + vddrf-supply = <&vreg_l17a_1p3>; > > + vddch0-supply = <&vreg_l25a_3p3>; > > + max-speed = <3200000>; > > + }; > > +}; > > + > > +&usb_1 { > > + status = "okay"; > > +}; > > + > > +&usb_1_dwc3 { > > + dr_mode = "peripheral"; > > +}; > > + > > +&usb_1_hsphy { > > + status = "okay"; > > + > > + vdd-supply = <&vreg_l1a_0p875>; > > + vdda-pll-supply = <&vreg_l12a_1p8>; > > + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; > > + > > + qcom,imp-res-offset-value = <8>; > > + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; > > + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; > > + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; > > +}; > > + > > +&usb_1_qmpphy { > > + status = "okay"; > > + > > + vdda-phy-supply = <&vreg_l26a_1p2>; > > + vdda-pll-supply = <&vreg_l1a_0p875>; > > +}; > > + > > +&ufs_mem_hc { > > + status = "okay"; > > + > > + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; > > + > > + vcc-supply = <&vreg_l20a_2p95>; > > + vcc-max-microamp = <800000>; > > +}; > > + > > +&ufs_mem_phy { > > + status = "okay"; > > + > > + vdda-phy-supply = <&vreg_l1a_0p875>; > > + vdda-pll-supply = <&vreg_l26a_1p2>; > > +}; > > + > > +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ > > + > > +&qup_uart6_default { > > + pinmux { > > + pins = "gpio45", "gpio46", "gpio47", "gpio48"; > > + function = "qup6"; > > + }; > > + > > + cts { > > + pins = "gpio45"; > > + bias-disable; > > + }; > > + > > + rts-tx { > > + pins = "gpio46", "gpio47"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + rx { > > + pins = "gpio48"; > > + bias-pull-up; > > + }; > > +}; > > -- > > 2.7.4 > >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0f2c33d611df..3ef1b48bc0cb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts new file mode 100644 index 000000000000..af66459712fe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-beryllium.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Xiaomi Technologies Inc. Beryllium"; + compatible = "xiaomi,beryllium", "qcom,sdm845"; + + /* required for bootloader to select correct board */ + qcom,board-id = <69 0>; + qcom,msm-id = <321 0x20001>; + + aliases { + hsuart0 = &uart6; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +/* Reserved memory changes from downstream */ +/ { + reserved-memory { + removed_region: memory@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x1A00000>; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +};
Add initial dts support for Xiaomi Poco F1 (Beryllium). This initial support is based on upstream Dragonboard 845c (sdm845) device. With this dts, Beryllium boots AOSP up to ADB shell over USB-C. Supported functionality includes UFS, USB-C (peripheral), microSD card and Vol+/Vol-/power keys. Bluetooth should work too but couldn't be verified from adb command line, it is verified when enabled from UI with few WIP display patches. Just like initial db845c support, initializing the SMMU is clearing the mapping used for the splash screen framebuffer, which causes the device to hang during boot and recovery needs a hard power reset. This can be worked around using: fastboot oem select-display-panel none To switch ON the display back run: fastboot oem select-display-panel But this only works on Beryllium devices running bootloader version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with Android-9 based release. Newer bootloader version do not support switching OFF the display panel at all. So we need a few additional smmu patches (under review) from here to boot to shell: https://github.com/pundiramit/linux/commits/beryllium-mainline Signed-off-by: Amit Pundir <amit.pundir@linaro.org> --- v3: Added a reserved-memory region from downstream kernel to fix a boot regression with recent dma-pool changes in v5.8-rc6. v2: Updated machine compatible string for seemingly inevitable future quirks. arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sdm845-beryllium.dts | 331 ++++++++++++++++++++++++++ 2 files changed, 332 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-beryllium.dts -- 2.7.4