diff mbox series

[3/4] sunxi: pmic_bus: Add DM I2C support

Message ID 20200529162839.3544366-4-b.spranger@linutronix.de
State New
Headers show
Series Add support for LX TestBox | expand

Commit Message

Benedikt Spranger May 29, 2020, 4:28 p.m. UTC 
Add support for U-Boot DM.

Signed-off-by: Benedikt Spranger <b.spranger at linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt at linutronix.de>
---
 arch/arm/mach-sunxi/pmic_bus.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c
index 091c59331b..8ecd037528 100644
--- a/arch/arm/mach-sunxi/pmic_bus.c
+++ b/arch/arm/mach-sunxi/pmic_bus.c
@@ -34,6 +34,8 @@ 
 #undef PMIC_I2C_ADDR
 #endif
 
+struct udevice *pmic_dev __section(.data) = NULL;
+
 int pmic_bus_init(void)
 {
 	/* This cannot be 0 because it is used in SPL before BSS is ready */
@@ -43,6 +45,16 @@  int pmic_bus_init(void)
 	if (!needs_init)
 		return 0;
 
+#if defined PMIC_I2C_ADDR && defined CONFIG_DM_I2C
+	struct udevice *dev = NULL;
+	int rc;
+
+	rc = i2c_get_chip_for_busnum(0, PMIC_I2C_ADDR, 1, &dev);
+	if (rc)
+		return rc;
+	pmic_dev = dev;
+#endif
+
 #if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
 # ifdef CONFIG_MACH_SUN6I
 	p2wi_init();
@@ -69,7 +81,11 @@  int pmic_bus_init(void)
 int pmic_bus_read(u8 reg, u8 *data)
 {
 #ifdef PMIC_I2C_ADDR
+#ifndef CONFIG_DM_I2C
 	return i2c_read(PMIC_I2C_ADDR, reg, 1, data, 1);
+#else
+	return dm_i2c_read(pmic_dev, reg, data, 1);
+#endif
 #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
 # ifdef CONFIG_MACH_SUN6I
 	return p2wi_read(reg, data);
@@ -84,7 +100,11 @@  int pmic_bus_read(u8 reg, u8 *data)
 int pmic_bus_write(u8 reg, u8 data)
 {
 #ifdef PMIC_I2C_ADDR
+#ifndef CONFIG_DM_I2C
 	return i2c_write(PMIC_I2C_ADDR, reg, 1, &data, 1);
+#else
+	return dm_i2c_read(pmic_dev, reg, &data, 1);
+#endif
 #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
 # ifdef CONFIG_MACH_SUN6I
 	return p2wi_write(reg, data);