[v13,16/19] sifive: fu540: Add sample SD gpt partition layout

From: Jagan Teki <jagan at amarulasolutions.com>

From: Jagan Teki <jagan at amarulasolutions.com>

This is a sample GPT partition layout for SD card,
right now three important partitions are added to
make the system bootable.

partition layout:

Part    Start LBA       End LBA         Name
        Attributes
        Type GUID
        Partition GUID
  1     0x00000022      0x00000821      "loader1"
        attrs:  0x0000000000000000
        type:   5b193300-fc78-40cd-8002-e86c45580b47
        guid:   cbcbef44-e627-42bc-b134-93b6f3784b8c
  2     0x00000822      0x00002821      "loader2"
        attrs:  0x0000000000000000
        type:   2e54b353-1271-4842-806f-e436d6af6985
        guid:   f54eba28-d8de-4852-978d-1a673777e2ae
  3     0x00002822      0x00020821      "rootfs"
        attrs:  0x0000000000000004
        type:   0fc63daf-8483-4772-8e79-3d69d8477de4
        type:   linux
        guid:   9561df46-8d55-4799-a83b-cfee9ef6ff93

Note:
- loader1 would be fsbl or spl
- loader2 would be U-Boot or U-Boot proper

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
 board/sifive/fu540/Kconfig     |  2 ++
 include/configs/sifive-fu540.h | 13 +++++++++++++
 2 files changed, 15 insertions(+)

Message ID	20200529060340.26708-17-pragnesh.patel@sifive.com
State	New
Headers	show List-Id: U-Boot discussion <u-boot.lists.denx.de> From: pragnesh.patel at sifive.com (Pragnesh Patel) Date: Fri, 29 May 2020 11:33:36 +0530 Subject: [PATCH v13 16/19] sifive: fu540: Add sample SD gpt partition layout In-Reply-To: <20200529060340.26708-1-pragnesh.patel@sifive.com> References: <20200529060340.26708-1-pragnesh.patel@sifive.com> Message-ID: <20200529060340.26708-17-pragnesh.patel@sifive.com>
Series	RISC-V SiFive FU540 support SPL \| expand [v13,00/19] RISC-V SiFive FU540 support SPL [v13,01/19] misc: add driver for the SiFive otp controller [v13,02/19] riscv: sifive: fu540: Use OTP DM driver for serial environment variable [v13,03/19] riscv: Add _image_binary_end for SPL [v13,04/19] lib: Makefile: build crc7.c when CONFIG_MMC_SPI [v13,05/19] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files [v13,06/19] sifive: fu540: add ddr driver [v13,07/19] sifive: dts: fu540: Add DDR controller and phy register settings [v13,08/19] riscv: sifive: dts: fu540: add U-Boot dmc node [v13,09/19] clk: sifive: fu540-prci: Add clock enable and disable ops [v13,10/19] clk: sifive: fu540-prci: Add ddr clock initialization [v13,11/19] clk: sifive: fu540-prci: Release ethernet clock reset [v13,12/19] riscv: sifive: dts: fu540: set ethernet clock rate [v13,13/19] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux [v13,14/19] riscv: cpu: fu540: Add support for cpu fu540 [v13,15/19] riscv: sifive: fu540: add SPL configuration [v13,16/19] sifive: fu540: Add sample SD gpt partition layout [v13,17/19] sifive: fu540: Add U-Boot proper sector start [v13,18/19] configs: fu540: Add config options for U-Boot SPL [v13,19/19] doc: sifive: fu540: Add description for OpenSBI generic platform

[v13,16/19] sifive: fu540: Add sample SD gpt partition layout

Commit Message

Patch