[23/24] spi: Zap fsl_espi

diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index bfa601e91b..304b3ff246 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2970,8 +2970,6 @@  struct ccsr_pman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_IFC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_IFC_OFFSET)
-#define CONFIG_SYS_MPC85xx_ESPI_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
 #define CONFIG_SYS_MPC85xx_PCIX_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
 #define CONFIG_SYS_MPC85xx_PCIX2_ADDR \
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8fccfbf20d..c4135cdbff 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -410,14 +410,6 @@  config ZYNQMP_GQSPI
 
 endif # if DM_SPI
 
-config FSL_ESPI
-	bool "Freescale eSPI driver"
-	imply SPI_FLASH_BAR
-	help
-	  Enable the Freescale eSPI driver. This driver can be used to
-	  access the SPI interface and SPI NOR flash on platforms embedding
-	  this Freescale eSPI IP core.
-
 config SH_QSPI
 	bool "Renesas Quad SPI driver"
 	help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 54881a7412..a1b907875a 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -28,7 +28,6 @@  obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
 obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
 obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
 obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
-obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
 obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
 obj-$(CONFIG_ICH_SPI) +=  ich.o
 obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
deleted file mode 100644
index 50d194f614..0000000000
--- a/drivers/spi/fsl_espi.c
+++ /dev/null
@@ -1,386 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * eSPI controller driver.
- *
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- * Author: Mingkai Hu (Mingkai.hu at freescale.com)
- */
-
-#include <common.h>
-#include <log.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <malloc.h>
-#include <spi.h>
-#include <asm/immap_85xx.h>
-
-struct fsl_spi_slave {
-	struct spi_slave slave;
-	ccsr_espi_t	*espi;
-	unsigned int	div16;
-	unsigned int	pm;
-	int		tx_timeout;
-	unsigned int	mode;
-	size_t		cmd_len;
-	u8		cmd_buf[16];
-	size_t		data_len;
-	unsigned int    max_transfer_length;
-};
-
-#define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave)
-#define US_PER_SECOND		1000000UL
-
-#define ESPI_MAX_CS_NUM		4
-#define ESPI_FIFO_WIDTH_BIT	32
-
-#define ESPI_EV_RNE		BIT(9)
-#define ESPI_EV_TNF		BIT(8)
-#define ESPI_EV_DON		BIT(14)
-#define ESPI_EV_TXE		BIT(15)
-#define ESPI_EV_RFCNT_SHIFT	24
-#define ESPI_EV_RFCNT_MASK	(0x3f << ESPI_EV_RFCNT_SHIFT)
-
-#define ESPI_MODE_EN		BIT(31)	/* Enable interface */
-#define ESPI_MODE_TXTHR(x)	((x) << 8)	/* Tx FIFO threshold */
-#define ESPI_MODE_RXTHR(x)	((x) << 0)	/* Rx FIFO threshold */
-
-#define ESPI_COM_CS(x)		((x) << 30)
-#define ESPI_COM_TRANLEN(x)	((x) << 0)
-
-#define ESPI_CSMODE_CI_INACTIVEHIGH	BIT(31)
-#define ESPI_CSMODE_CP_BEGIN_EDGCLK	BIT(30)
-#define ESPI_CSMODE_REV_MSB_FIRST	BIT(29)
-#define ESPI_CSMODE_DIV16		BIT(28)
-#define ESPI_CSMODE_PM(x)		((x) << 24)
-#define ESPI_CSMODE_POL_ASSERTED_LOW	BIT(20)
-#define ESPI_CSMODE_LEN(x)		((x) << 16)
-#define ESPI_CSMODE_CSBEF(x)		((x) << 12)
-#define ESPI_CSMODE_CSAFT(x)		((x) << 8)
-#define ESPI_CSMODE_CSCG(x)		((x) << 3)
-
-#define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \
-		ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \
-		ESPI_CSMODE_CSCG(1))
-
-#define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int mode)
-{
-	struct fsl_spi_slave *fsl;
-	sys_info_t sysinfo;
-	unsigned long spibrg = 0;
-	unsigned long spi_freq = 0;
-	unsigned char pm = 0;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs);
-	if (!fsl)
-		return NULL;
-
-	fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
-	fsl->mode = mode;
-	fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
-
-	/* Set eSPI BRG clock source */
-	get_sys_info(&sysinfo);
-	spibrg = sysinfo.freq_systembus / 2;
-	fsl->div16 = 0;
-	if ((spibrg / max_hz) > 32) {
-		fsl->div16 = ESPI_CSMODE_DIV16;
-		pm = spibrg / (max_hz * 16 * 2);
-		if (pm > 16) {
-			pm = 16;
-			debug("Requested speed is too low: %d Hz, %ld Hz "
-				"is used.\n", max_hz, spibrg / (32 * 16));
-		}
-	} else
-		pm = spibrg / (max_hz * 2);
-	if (pm)
-		pm--;
-	fsl->pm = pm;
-
-	if (fsl->div16)
-		spi_freq = spibrg / ((pm + 1) * 2 * 16);
-	else
-		spi_freq = spibrg / ((pm + 1) * 2);
-
-	/* set tx_timeout to 10 times of one espi FIFO entry go out */
-	fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT
-				* 10), spi_freq);
-
-	return &fsl->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
-	free(fsl);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
-	ccsr_espi_t *espi = fsl->espi;
-	unsigned char pm = fsl->pm;
-	unsigned int cs = slave->cs;
-	unsigned int mode =  fsl->mode;
-	unsigned int div16 = fsl->div16;
-	int i;
-
-	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs);
-
-	/* Enable eSPI interface */
-	out_be32(&espi->mode, ESPI_MODE_RXTHR(3)
-			| ESPI_MODE_TXTHR(4) | ESPI_MODE_EN);
-
-	out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */
-	out_be32(&espi->mask, 0x00000000); /* Mask  all eSPI interrupts */
-
-	/* Init CS mode interface */
-	for (i = 0; i < ESPI_MAX_CS_NUM; i++)
-		out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL);
-
-	out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) &
-		~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16
-		| ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK
-		| ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF)));
-
-	/* Set eSPI BRG clock source */
-	out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
-		| ESPI_CSMODE_PM(pm) | div16);
-
-	/* Set eSPI mode */
-	if (mode & SPI_CPHA)
-		out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
-			| ESPI_CSMODE_CP_BEGIN_EDGCLK);
-	if (mode & SPI_CPOL)
-		out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
-			| ESPI_CSMODE_CI_INACTIVEHIGH);
-
-	/* Character bit order: msb first */
-	out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
-		| ESPI_CSMODE_REV_MSB_FIRST);
-
-	/* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */
-	out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
-		| ESPI_CSMODE_LEN(7));
-
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-
-}
-
-static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout)
-{
-	ccsr_espi_t *espi = fsl->espi;
-	unsigned int tmpdout, event;
-	int tmp_tx_timeout;
-
-	if (dout)
-		tmpdout = *(u32 *)dout;
-	else
-		tmpdout = 0;
-
-	out_be32(&espi->tx, tmpdout);
-	out_be32(&espi->event, ESPI_EV_TNF);
-	debug("***spi_xfer:...%08x written\n", tmpdout);
-
-	tmp_tx_timeout = fsl->tx_timeout;
-	/* Wait for eSPI transmit to go out */
-	while (tmp_tx_timeout--) {
-		event = in_be32(&espi->event);
-		if (event & ESPI_EV_DON || event & ESPI_EV_TXE) {
-			out_be32(&espi->event, ESPI_EV_TXE);
-			break;
-		}
-		udelay(1);
-	}
-
-	if (tmp_tx_timeout < 0)
-		debug("***spi_xfer:...Tx timeout! event = %08x\n", event);
-}
-
-static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din, unsigned int bytes)
-{
-	ccsr_espi_t *espi = fsl->espi;
-	unsigned int tmpdin, rx_times;
-	unsigned char *buf, *p_cursor;
-
-	if (bytes <= 0)
-		return 0;
-
-	rx_times = DIV_ROUND_UP(bytes, 4);
-	buf = (unsigned char *)malloc(4 * rx_times);
-	if (!buf) {
-		debug("SF: Failed to malloc memory.\n");
-		return -1;
-	}
-	p_cursor = buf;
-	while (rx_times--) {
-		tmpdin = in_be32(&espi->rx);
-		debug("***spi_xfer:...%08x readed\n", tmpdin);
-		*(u32 *)p_cursor = tmpdin;
-		p_cursor += 4;
-	}
-
-	if (din)
-		memcpy(din, buf, bytes);
-
-	free(buf);
-	out_be32(&espi->event, ESPI_EV_RNE);
-
-	return bytes;
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out,
-		void *data_in, unsigned long flags)
-{
-	struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
-	ccsr_espi_t *espi = fsl->espi;
-	unsigned int event, rx_bytes;
-	const void *dout = NULL;
-	void *din = NULL;
-	int len = 0;
-	int num_blks, num_chunks, max_tran_len, tran_len;
-	int num_bytes;
-	unsigned char *buffer = NULL;
-	size_t buf_len;
-	u8 *cmd_buf = fsl->cmd_buf;
-	size_t cmd_len = fsl->cmd_len;
-	size_t data_len = bitlen / 8;
-	size_t rx_offset = 0;
-	int rf_cnt;
-
-	max_tran_len = fsl->max_transfer_length;
-	switch (flags) {
-	case SPI_XFER_BEGIN:
-		cmd_len = fsl->cmd_len = data_len;
-		memcpy(cmd_buf, data_out, cmd_len);
-		return 0;
-	case 0:
-	case SPI_XFER_END:
-		if (bitlen == 0) {
-			spi_cs_deactivate(slave);
-			return 0;
-		}
-		buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len);
-		len = cmd_len + data_len;
-		rx_offset = cmd_len;
-		buffer = (unsigned char *)malloc(buf_len);
-		if (!buffer) {
-			debug("SF: Failed to malloc memory.\n");
-			return 1;
-		}
-		memcpy(buffer, cmd_buf, cmd_len);
-		if (data_in == NULL)
-			memcpy(buffer + cmd_len, data_out, data_len);
-		break;
-	case SPI_XFER_BEGIN | SPI_XFER_END:
-		len = data_len;
-		buffer = (unsigned char *)malloc(len * 2);
-		if (!buffer) {
-			debug("SF: Failed to malloc memory.\n");
-			return 1;
-		}
-		memcpy(buffer, data_out, len);
-		rx_offset = len;
-		cmd_len = 0;
-		break;
-	}
-
-	debug("spi_xfer: data_out %08X(%p) data_in %08X(%p) len %u\n",
-	      *(uint *)data_out, data_out, *(uint *)data_in, data_in, len);
-
-	num_chunks = DIV_ROUND_UP(data_len, max_tran_len);
-	while (num_chunks--) {
-		if (data_in)
-			din = buffer + rx_offset;
-		dout = buffer;
-		tran_len = min(data_len, (size_t)max_tran_len);
-		num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
-		num_bytes = (tran_len + cmd_len) % 4;
-		fsl->data_len = tran_len + cmd_len;
-		spi_cs_activate(slave);
-
-		/* Clear all eSPI events */
-		out_be32(&espi->event , 0xffffffff);
-		/* handle data in 32-bit chunks */
-		while (num_blks) {
-			event = in_be32(&espi->event);
-			if (event & ESPI_EV_TNF) {
-				fsl_espi_tx(fsl, dout);
-				/* Set up the next iteration */
-				if (len > 4) {
-					len -= 4;
-					dout += 4;
-				}
-			}
-
-			event = in_be32(&espi->event);
-			if (event & ESPI_EV_RNE) {
-				rf_cnt = ((event & ESPI_EV_RFCNT_MASK)
-						>> ESPI_EV_RFCNT_SHIFT);
-				if (rf_cnt >= 4)
-					rx_bytes = 4;
-				else if (num_blks == 1 && rf_cnt == num_bytes)
-					rx_bytes = num_bytes;
-				else
-					continue;
-				if (fsl_espi_rx(fsl, din, rx_bytes)
-						== rx_bytes) {
-					num_blks--;
-					if (din)
-						din = (unsigned char *)din
-							+ rx_bytes;
-				}
-			}
-		}
-		if (data_in) {
-			memcpy(data_in, buffer + 2 * cmd_len, tran_len);
-			if (*buffer == 0x0b) {
-				data_in += tran_len;
-				data_len -= tran_len;
-				*(int *)buffer += tran_len;
-			}
-		}
-		spi_cs_deactivate(slave);
-	}
-
-	free(buffer);
-	return 0;
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs < ESPI_MAX_CS_NUM;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
-	ccsr_espi_t *espi = fsl->espi;
-	unsigned int com = 0;
-	size_t data_len = fsl->data_len;
-
-	com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF));
-	com |= ESPI_COM_CS(slave->cs);
-	com |= ESPI_COM_TRANLEN(data_len - 1);
-	out_be32(&espi->com, com);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
-	ccsr_espi_t *espi = fsl->espi;
-
-	/* clear the RXCNT and TXCNT */
-	out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN));
-	out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN);
-}
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 9b6b45116a..92e202e5aa 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3115,7 +3115,6 @@  CONFIG_SYS_MPC85xx_ECM_ADDR
 CONFIG_SYS_MPC85xx_ECM_OFFSET
 CONFIG_SYS_MPC85xx_ESDHC_ADDR
 CONFIG_SYS_MPC85xx_ESDHC_OFFSET
-CONFIG_SYS_MPC85xx_ESPI_ADDR
 CONFIG_SYS_MPC85xx_ESPI_OFFSET
 CONFIG_SYS_MPC85xx_GPIO3_ADDR
 CONFIG_SYS_MPC85xx_GPIO_ADDR