diff mbox series

[PATCHv2,2/8] imx: Remove ARCH= references from documentation

Message ID 20200526183655.29136-2-trini@konsulko.com
State Accepted
Commit 2b41e19cc54717e0be940b98243de3ae340a32c9
Headers show
Series [PATCHv2,1/8] amlogic: Remove ARCH= references from documentation | expand

Commit Message

Tom Rini May 26, 2020, 6:36 p.m. UTC 
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

Cc: Adam Ford <aford173 at gmail.com>
Cc: Vanessa Maegima <vanessa.maegima at nxp.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Igor Opaniuk <igor.opaniuk at toradex.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Changes in v2:
- Move actions cubieboard to its own commit, oops.

As an aside, the README files that haven't already been converted to rST
should be converted rST and moved to doc/board/ and the MAINTAINERS file
updated to include the new documentation file too.  Thanks!
---
 board/beacon/imx8mm/README                         | 2 +-
 board/logicpd/imx6/README                          | 2 +-
 board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +-
 doc/board/toradex/colibri_imx7.rst                 | 1 -
 4 files changed, 3 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/board/beacon/imx8mm/README b/board/beacon/imx8mm/README
index 4223fbd15dd6..dce176fa0b23 100644
--- a/board/beacon/imx8mm/README
+++ b/board/beacon/imx8mm/README
@@ -26,7 +26,7 @@  $ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
 Build U-Boot
 ============
 $ make imx8mm_beacon_defconfig
-$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
+$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
 
 Burn U-Boot to microSD Card
 ===========================
diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README
index 26d053a32c3b..19f79c5734bc 100644
--- a/board/logicpd/imx6/README
+++ b/board/logicpd/imx6/README
@@ -17,7 +17,7 @@  Building U-Boot for Logic PD Development Kit
 To build U-Boot for the Dual and Quad variants:
 
  make imx6q_logic_defconfig
- make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-
+ make u-boot.imx CROSS_COMPILE=arm-linux-
 
 
 Flashing U-Boot into the SD card
diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
index 40324ffe5f34..1b346093b88d 100644
--- a/board/technexion/pico-imx7d/README.pico-imx7d_BL33
+++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
@@ -4,7 +4,7 @@  The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
 world in this case.
 
 - Build u-boot
-    Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm
+    Set environment variable of CROSS_COMPILE for your toolchain
     $ make pico-imx7d_bl33_defconfig
     $ make all
 
diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst
index 6fb952666661..a30e721379ee 100644
--- a/doc/board/toradex/colibri_imx7.rst
+++ b/doc/board/toradex/colibri_imx7.rst
@@ -18,7 +18,6 @@  Build U-Boot
 .. code-block:: bash
 
     $ export CROSS_COMPILE=arm-linux-gnueabi-
-    $ export ARCH=arm
     $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig
     $ make