diff mbox series

[v4,9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)

Message ID 20200525113959.11886-10-s.nawrocki@samsung.com
State New
Headers show
Series include/bitfield.h: include byteorder.h | expand

Commit Message

Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics May 25, 2020, 11:39 a.m. UTC 
From: Marek Szyprowski <m.szyprowski at samsung.com>

This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI
and USB commands. To get it working one has to call the following commands:
"pci enum; usb start;", thus such commands have been added to the default
"preboot" environment variable. One has to update their environment if it
is already configured to get this feature working out of the box.

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
Changes since v3:
 - added missing rpi_4_defconfig changes
Changes since v2:
 - rpi_4_32b_defconfig, rpi_4_defconfig changes moved to separate
   patch
Changes since v1:
 - removed unneeded CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY entry.
Changes since RFC:
 - none.
---
 configs/rpi_4_defconfig     | 9 +++++++++
 configs/rpi_arm64_defconfig | 8 +++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
index 6d148da..3f1a1b5 100644
--- a/configs/rpi_4_defconfig
+++ b/configs/rpi_4_defconfig
@@ -8,6 +8,8 @@  CONFIG_NR_DRAM_BANKS=2
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="pci enum; usb start;"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
@@ -15,6 +17,8 @@  CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_FS_UUID=y
 CONFIG_OF_BOARD=y
 CONFIG_ENV_FAT_INTERFACE="mmc"
@@ -28,12 +32,17 @@  CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
 CONFIG_BCMGENET=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_BRCMSTB=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
index fea86be..f12d1e3 100644
--- a/configs/rpi_arm64_defconfig
+++ b/configs/rpi_arm64_defconfig
@@ -7,13 +7,14 @@  CONFIG_NR_DRAM_BANKS=2
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="usb start"
+CONFIG_PREBOOT="pci enum; usb start;"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_FS_UUID=y
 CONFIG_OF_BOARD=y
@@ -26,11 +27,16 @@  CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
 CONFIG_BCMGENET=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_BRCMSTB=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_HOST_ETHER=y