diff mbox series

rk3399: SPI boot: Return from ROM unsuccessful (with TPL)

Message ID CAM+7aWv7VU3SVzvPhm74FAVcaZ=z04UYyqtzTYV2yPBAmsuwDg@mail.gmail.com
State New
Headers show
Series rk3399: SPI boot: Return from ROM unsuccessful (with TPL) | expand

Commit Message

Suniel Mahesh May 23, 2020, 6:10 p.m. UTC 
On Wed, May 20, 2020 at 5:39 PM Jagan Teki <jagan at amarulasolutions.com>
wrote:

> It seems like SPI boot on rk3399 with TPL based is unable to return
> from ROM or switching to from TPL to SPL is unsuccessful.
>
> I have verified board_init_f on spl.c and the control is not even
> reached here. On the other hand the SPL-alone boot flow works fine
> from SPI.
>
> SPI boot log:
>
> U-Boot TPL 2020.07-rc2-00047-gd2ebbbd0e6,`irty (May 20 2020 - 17:22:25)
> Channel 0: LPDDR4, 50MHz
> BW=30 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Shze=2048LB
> Channel 1: LPDR4,50MHz
> BW=32 CoL=10 Bk=8 CR0 Row=15 CS1 Row=15 CS=2 Die BW=16 Cize=2048LB
> 256B stride
> 256B spride
> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> lpddr4_set_rate8 changE freq to 800000000 mhz 0, 0
> Trying to bont from BOOTROM
> Returning to boot ROM...
>
> Any inputs?
>

Hi,

We have done the following changes and booted via SPI flash on
roc-rk3399-pc and rockpro64-rk3399 targets.

U-Boot TPL 2020.07-rc2-00204-ge74f823-dirty (May 23 2020 - 23:18:34)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
spl_boot_device:
Trying to boot from BOOTROM
board_return_to_bootrom:
Returning to boot ROM...

U-Boot TPL 2020.07-rc2-00204-ge74f823-dirty (May 23 2020 - 23:18:34)
sdram_init: LPDDR4 - 50MHz failed!
rk3399_dmc_init DRAM init failed -22
spl_boot_device:
Trying to boot from BOOTROM
board_return_to_bootrom:
Returning to boot ROM...

for some reason, TPL loads twice. Unable to understand this behaviour. Any
inputs ?
diff mbox series

Patch

diff --git a/Makefile b/Makefile
index 463fa72..167de36 100644
--- a/Makefile
+++ b/Makefile
@@ -1439,10 +1439,10 @@  u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD)
FORCE
 ifeq ($(CONFIG_ARCH_ROCKCHIP),y)

 # rockchip image type
-ifeq ($(CONFIG_SPL_SPI_LOAD),y)
-ROCKCHIP_IMG_TYPE := rkspi
-else
+ifeq ($(CONFIG_SPL_MMC_SUPPORT),y)
 ROCKCHIP_IMG_TYPE := rksd
+else
+ROCKCHIP_IMG_TYPE := rkspi
 endif

diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
index 141dd0b..a331d1a 100644
--- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
@@ -11,8 +11,12 @@ 
                spi0 = &spi1;
        };

+       config {
+               u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+       };
+
        chosen {
-               u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+               u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci,
&sdmmc;
        };

        vcc_hub_en: vcc_hub_en-regulator {
@@ -40,6 +44,12 @@ 
        vin-supply = <&vcc_vbus_typec0>;
 };

+&spi1 {
+       spi_flash: flash at 0 {
+               u-boot,dm-pre-reloc;
+       };
+};
+
 &vdd_log {
        regulator-min-microvolt = <430000>;
        regulator-init-microvolt = <950000>;

diff --git a/configs/roc-pc-rk3399_defconfig
b/configs/roc-pc-rk3399_defconfig
index aff690f..7ae6789 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -7,12 +7,15 @@  CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y