@@ -166,17 +166,135 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
return 0;
}
+/**
+ * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * @host: Pointer to the sdhci_host structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host,
+ int degrees)
+{
+ struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+ int timing = mode2timing[mmc->selected_mode];
+
+ /*
+ * This is applicable for SDHCI_SPEC_300 and above
+ * ZynqMP does not set phase for <=25MHz clock.
+ * If degrees is zero, no need to do anything.
+ */
+ if (host->version < SDHCI_SPEC_300 ||
+ timing == MMC_TIMING_LEGACY ||
+ timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ return 0;
+
+ switch (timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 30 Taps are available */
+ tap_max = 30;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 15 Taps are available */
+ tap_max = 15;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 8 Taps are available */
+ tap_max = 8;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ arasan_zynqmp_set_tapdelay(priv->deviceid, 0, tap_delay);
+
+ return ret;
+}
+
+/**
+ * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * @host: Pointer to the sdhci_host structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
+ int degrees)
+{
+ struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+ int timing = mode2timing[mmc->selected_mode];
+
+ /*
+ * This is applicable for SDHCI_SPEC_300 and above
+ * ZynqMP does not set phase for <=25MHz clock.
+ * If degrees is zero, no need to do anything.
+ */
+ if (host->version < SDHCI_SPEC_300 ||
+ timing == MMC_TIMING_LEGACY ||
+ timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ return 0;
+
+ switch (timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 120 Taps are available */
+ tap_max = 120;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 60 Taps are available */
+ tap_max = 60;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 30 Taps are available */
+ tap_max = 30;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ arasan_zynqmp_set_tapdelay(priv->deviceid, tap_delay, 0);
+
+ return ret;
+}
+
static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
{
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
+ struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
struct mmc *mmc = (struct mmc *)host->mmc;
- u8 uhsmode;
+ struct udevice *dev = mmc->dev;
+ u8 timing = mode2timing[mmc->selected_mode];
+ u32 iclk_phase = clk_data->clk_phase_in[timing];
+ u32 oclk_phase = clk_data->clk_phase_out[timing];
- uhsmode = mode2timing[mmc->selected_mode];
+ dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);
- if (uhsmode >= UHS_SDR25_BUS_SPEED)
- arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
- priv->bank);
+ if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
+ device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
+ sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
+ sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
+ }
}
static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing,