| Message ID | 20200514115258.21042-7-pragnesh.patel@sifive.com |
|---|---|
| State | New |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
On Thu, May 14, 2020 at 7:53 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > Add driver for fu540 to support ddr initialization in SPL. > This driver is based on FSBL > (https://github.com/sifive/freedom-u540-c000-bootloader.git) > > Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > --- > board/sifive/fu540/Kconfig | 2 + > drivers/ram/Kconfig | 1 + > drivers/ram/Makefile | 2 + > drivers/ram/sifive/Kconfig | 13 + > drivers/ram/sifive/Makefile | 6 + > drivers/ram/sifive/fu540_ddr.c | 417 +++++++++++++++++++++++++++++++++ > 6 files changed, 441 insertions(+) > create mode 100644 drivers/ram/sifive/Kconfig > create mode 100644 drivers/ram/sifive/Makefile > create mode 100644 drivers/ram/sifive/fu540_ddr.c > > diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig > index 4330ac4491..d41c305227 100644 > --- a/board/sifive/fu540/Kconfig > +++ b/board/sifive/fu540/Kconfig > @@ -19,6 +19,8 @@ config SYS_TEXT_BASE > config BOARD_SPECIFIC_OPTIONS # dummy > def_bool y > select GENERIC_RISCV > + select RAM > + select SPL_RAM if SPL > imply CMD_DHCP > imply CMD_EXT2 > imply CMD_EXT4 > diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig > index 56fea7c94c..66074d1feb 100644 > --- a/drivers/ram/Kconfig > +++ b/drivers/ram/Kconfig > @@ -75,3 +75,4 @@ config IMXRT_SDRAM > > source "drivers/ram/rockchip/Kconfig" > source "drivers/ram/stm32mp1/Kconfig" > +source "drivers/ram/sifive/Kconfig" nits: please insert this line after the rockchip one, by following the alphabetical order > diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile > index 5c897410c6..769c9d6218 100644 > --- a/drivers/ram/Makefile > +++ b/drivers/ram/Makefile > @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ > obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ > > obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o > + > +obj-$(CONFIG_RAM_SIFIVE) += sifive/ > diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig > new file mode 100644 > index 0000000000..6aca22ab2a > --- /dev/null > +++ b/drivers/ram/sifive/Kconfig > @@ -0,0 +1,13 @@ > +config RAM_SIFIVE > + bool "Ram drivers support for SiFive SoCs" > + depends on RAM && RISCV > + default y > + help > + This enables support for ram drivers of SiFive SoCs. > + > +config SIFIVE_FU540_DDR > + bool "SiFive FU540 DDR driver" > + depends on RAM_SIFIVE > + default y if TARGET_SIFIVE_FU540 > + help > + This enables DDR support for the platforms based on SiFive FU540 SoC. > diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile > new file mode 100644 > index 0000000000..d66efec264 > --- /dev/null > +++ b/drivers/ram/sifive/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (c) 2020 SiFive, Inc > +# > + > +obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o > diff --git a/drivers/ram/sifive/fu540_ddr.c b/drivers/ram/sifive/fu540_ddr.c > new file mode 100644 > index 0000000000..7ace6447eb > --- /dev/null > +++ b/drivers/ram/sifive/fu540_ddr.c > @@ -0,0 +1,417 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * (C) Copyright 2020 SiFive, Inc. > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <init.h> > +#include <ram.h> > +#include <regmap.h> > +#include <syscon.h> > +#include <asm/io.h> > +#include <clk.h> > +#include <wait_bit.h> > + > +#define DENALI_CTL_0 0 > +#define DENALI_CTL_21 21 > +#define DENALI_CTL_120 120 > +#define DENALI_CTL_132 132 > +#define DENALI_CTL_136 136 > +#define DENALI_CTL_170 170 > +#define DENALI_CTL_181 181 > +#define DENALI_CTL_182 182 > +#define DENALI_CTL_184 184 > +#define DENALI_CTL_208 208 > +#define DENALI_CTL_209 209 > +#define DENALI_CTL_210 210 > +#define DENALI_CTL_212 212 > +#define DENALI_CTL_214 214 > +#define DENALI_CTL_216 216 > +#define DENALI_CTL_224 224 > +#define DENALI_CTL_225 225 > +#define DENALI_CTL_260 260 > + > +#define DENALI_PHY_1152 1152 > +#define DENALI_PHY_1214 1214 > + > +#define PAYLOAD_DEST 0x80000000 > +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) > + > +#define DRAM_CLASS_OFFSET 8 > +#define DRAM_CLASS_DDR4 0xA > +#define OPTIMAL_RMODW_EN_OFFSET 0 > +#define DISABLE_RD_INTERLEAVE_OFFSET 16 > +#define OUT_OF_RANGE_OFFSET 1 > +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 > +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 > +#define MC_INIT_COMPLETE_OFFSET 8 > +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 > +#define DFI_PHY_WRLELV_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 > +#define VREF_EN_OFFSET 24 > +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 > +#define AXI0_ADDRESS_RANGE_ENABLE 8 > +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 > +#define RDLVL_EN_OFFSET 16 > +#define RDLVL_GATE_EN_OFFSET 24 > +#define WRLVL_EN_OFFSET 0 > + > +#define PHY_RX_CAL_DQ0_0_OFFSET 0 > +#define PHY_RX_CAL_DQ1_0_OFFSET 16 > + > +struct fu540_ddrctl { > + volatile u32 denali_ctl[265]; > +}; > + > +struct fu540_ddrphy { > + volatile u32 denali_phy[1215]; > +}; > + > +/** > + * struct fu540_ddr_info > + * > + * @dev : pointer for the device > + * @info : UCLASS RAM information > + * @ctl : DDR controller base address > + * @phy : DDR PHY base address > + * @ctrl : DDR control base address > + * @physical_filter_ctrl : DDR physical filter control base address > + */ > +struct fu540_ddr_info { > + struct udevice *dev; > + struct ram_info info; > + struct fu540_ddrctl *ctl; > + struct fu540_ddrphy *phy; > + struct clk ddr_clk; > + u32 *physical_filter_ctrl; > +}; > + > +#if defined(CONFIG_TPL_BUILD) || \ > + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) nits: we don't support TPL, so the logic can be simplified to: #if defined(CONFIG_SPL_BUILD) Please fix this globally in this file > + > +struct fu540_ddr_params { > + struct fu540_ddrctl pctl_regs; > + struct fu540_ddrphy phy_regs; > +}; > + > +struct sifive_dmc_plat { > +#if CONFIG_IS_ENABLED(OF_PLATDATA) nits: OF_PLATDATA is not supported. Drop this? > + struct dtd_sifive_fu540_dmc dtplat; > +#else > + struct fu540_ddr_params ddr_params; > +#endif > +}; > + [snip] Regards, Bin
Hi Bin, >-----Original Message----- >From: Bin Meng <bmeng.cn at gmail.com> >Sent: 17 May 2020 17:38 >To: Pragnesh Patel <pragnesh.patel at sifive.com> >Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Atish Patra ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul >Walmsley <paul.walmsley at sifive.com>; Jagan Teki ><jagan at amarulasolutions.com>; Anup Patel <anup.patel at wdc.com>; Sagar >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer >Dabbelt <palmer at dabbelt.com>; Kever Yang <kever.yang at rock-chips.com>; >YouMin Chen <cym at rock-chips.com>; Giulio Benetti ><giulio.benetti at benettiengineering.com>; Kevin Scholz <k-scholz at ti.com>; >Lokesh Vutla <lokeshvutla at ti.com> >Subject: Re: [PATCH v10 06/18] sifive: fu540: add ddr driver > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >On Thu, May 14, 2020 at 7:53 PM Pragnesh Patel ><pragnesh.patel at sifive.com> wrote: >> >> Add driver for fu540 to support ddr initialization in SPL. >> This driver is based on FSBL >> (https://github.com/sifive/freedom-u540-c000-bootloader.git) >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >> --- >> board/sifive/fu540/Kconfig | 2 + >> drivers/ram/Kconfig | 1 + >> drivers/ram/Makefile | 2 + >> drivers/ram/sifive/Kconfig | 13 + >> drivers/ram/sifive/Makefile | 6 + >> drivers/ram/sifive/fu540_ddr.c | 417 >> +++++++++++++++++++++++++++++++++ >> 6 files changed, 441 insertions(+) >> create mode 100644 drivers/ram/sifive/Kconfig create mode 100644 >> drivers/ram/sifive/Makefile create mode 100644 >> drivers/ram/sifive/fu540_ddr.c >> >> diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig >> index 4330ac4491..d41c305227 100644 >> --- a/board/sifive/fu540/Kconfig >> +++ b/board/sifive/fu540/Kconfig >> @@ -19,6 +19,8 @@ config SYS_TEXT_BASE config >BOARD_SPECIFIC_OPTIONS >> # dummy >> def_bool y >> select GENERIC_RISCV >> + select RAM >> + select SPL_RAM if SPL >> imply CMD_DHCP >> imply CMD_EXT2 >> imply CMD_EXT4 >> diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index >> 56fea7c94c..66074d1feb 100644 >> --- a/drivers/ram/Kconfig >> +++ b/drivers/ram/Kconfig >> @@ -75,3 +75,4 @@ config IMXRT_SDRAM >> >> source "drivers/ram/rockchip/Kconfig" >> source "drivers/ram/stm32mp1/Kconfig" >> +source "drivers/ram/sifive/Kconfig" > >nits: please insert this line after the rockchip one, by following the alphabetical >order Will update in v11. > >> diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index >> 5c897410c6..769c9d6218 100644 >> --- a/drivers/ram/Makefile >> +++ b/drivers/ram/Makefile >> @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ >> obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ >> >> obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o >> + >> +obj-$(CONFIG_RAM_SIFIVE) += sifive/ >> diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig >> new file mode 100644 index 0000000000..6aca22ab2a >> --- /dev/null >> +++ b/drivers/ram/sifive/Kconfig >> @@ -0,0 +1,13 @@ >> +config RAM_SIFIVE >> + bool "Ram drivers support for SiFive SoCs" >> + depends on RAM && RISCV >> + default y >> + help >> + This enables support for ram drivers of SiFive SoCs. >> + >> +config SIFIVE_FU540_DDR >> + bool "SiFive FU540 DDR driver" >> + depends on RAM_SIFIVE >> + default y if TARGET_SIFIVE_FU540 >> + help >> + This enables DDR support for the platforms based on SiFive FU540 >SoC. >> diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile >> new file mode 100644 index 0000000000..d66efec264 >> --- /dev/null >> +++ b/drivers/ram/sifive/Makefile >> @@ -0,0 +1,6 @@ >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> +# Copyright (c) 2020 SiFive, Inc >> +# >> + >> +obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o >> diff --git a/drivers/ram/sifive/fu540_ddr.c >> b/drivers/ram/sifive/fu540_ddr.c new file mode 100644 index >> 0000000000..7ace6447eb >> --- /dev/null >> +++ b/drivers/ram/sifive/fu540_ddr.c >> @@ -0,0 +1,417 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * (C) Copyright 2020 SiFive, Inc. >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + */ >> + >> +#include <common.h> >> +#include <dm.h> >> +#include <init.h> >> +#include <ram.h> >> +#include <regmap.h> >> +#include <syscon.h> >> +#include <asm/io.h> >> +#include <clk.h> >> +#include <wait_bit.h> >> + >> +#define DENALI_CTL_0 0 >> +#define DENALI_CTL_21 21 >> +#define DENALI_CTL_120 120 >> +#define DENALI_CTL_132 132 >> +#define DENALI_CTL_136 136 >> +#define DENALI_CTL_170 170 >> +#define DENALI_CTL_181 181 >> +#define DENALI_CTL_182 182 >> +#define DENALI_CTL_184 184 >> +#define DENALI_CTL_208 208 >> +#define DENALI_CTL_209 209 >> +#define DENALI_CTL_210 210 >> +#define DENALI_CTL_212 212 >> +#define DENALI_CTL_214 214 >> +#define DENALI_CTL_216 216 >> +#define DENALI_CTL_224 224 >> +#define DENALI_CTL_225 225 >> +#define DENALI_CTL_260 260 >> + >> +#define DENALI_PHY_1152 1152 >> +#define DENALI_PHY_1214 1214 >> + >> +#define PAYLOAD_DEST 0x80000000 >> +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) >> + >> +#define DRAM_CLASS_OFFSET 8 >> +#define DRAM_CLASS_DDR4 0xA >> +#define OPTIMAL_RMODW_EN_OFFSET 0 >> +#define DISABLE_RD_INTERLEAVE_OFFSET 16 >> +#define OUT_OF_RANGE_OFFSET 1 >> +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 >> +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 >> +#define MC_INIT_COMPLETE_OFFSET 8 >> +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 >> +#define DFI_PHY_WRLELV_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 >> +#define VREF_EN_OFFSET 24 >> +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 >> +#define AXI0_ADDRESS_RANGE_ENABLE 8 >> +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 >> +#define RDLVL_EN_OFFSET 16 >> +#define RDLVL_GATE_EN_OFFSET 24 >> +#define WRLVL_EN_OFFSET 0 >> + >> +#define PHY_RX_CAL_DQ0_0_OFFSET 0 >> +#define PHY_RX_CAL_DQ1_0_OFFSET 16 >> + >> +struct fu540_ddrctl { >> + volatile u32 denali_ctl[265]; >> +}; >> + >> +struct fu540_ddrphy { >> + volatile u32 denali_phy[1215]; }; >> + >> +/** >> + * struct fu540_ddr_info >> + * >> + * @dev : pointer for the device >> + * @info : UCLASS RAM information >> + * @ctl : DDR controller base address >> + * @phy : DDR PHY base address >> + * @ctrl : DDR control base address >> + * @physical_filter_ctrl : DDR physical filter control base address >> + */ >> +struct fu540_ddr_info { >> + struct udevice *dev; >> + struct ram_info info; >> + struct fu540_ddrctl *ctl; >> + struct fu540_ddrphy *phy; >> + struct clk ddr_clk; >> + u32 *physical_filter_ctrl; >> +}; >> + >> +#if defined(CONFIG_TPL_BUILD) || \ >> + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) > >nits: we don't support TPL, so the logic can be simplified to: > >#if defined(CONFIG_SPL_BUILD) > >Please fix this globally in this file Will update in v11. > >> + >> +struct fu540_ddr_params { >> + struct fu540_ddrctl pctl_regs; >> + struct fu540_ddrphy phy_regs; >> +}; >> + >> +struct sifive_dmc_plat { >> +#if CONFIG_IS_ENABLED(OF_PLATDATA) > >nits: OF_PLATDATA is not supported. Drop this? Yes, will update in v11. > >> + struct dtd_sifive_fu540_dmc dtplat; #else >> + struct fu540_ddr_params ddr_params; #endif }; >> + > >[snip] > >Regards, >Bin
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig index 4330ac4491..d41c305227 100644 --- a/board/sifive/fu540/Kconfig +++ b/board/sifive/fu540/Kconfig @@ -19,6 +19,8 @@ config SYS_TEXT_BASE config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select GENERIC_RISCV + select RAM + select SPL_RAM if SPL imply CMD_DHCP imply CMD_EXT2 imply CMD_EXT4 diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 56fea7c94c..66074d1feb 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -75,3 +75,4 @@ config IMXRT_SDRAM source "drivers/ram/rockchip/Kconfig" source "drivers/ram/stm32mp1/Kconfig" +source "drivers/ram/sifive/Kconfig" diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index 5c897410c6..769c9d6218 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/ obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o + +obj-$(CONFIG_RAM_SIFIVE) += sifive/ diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig new file mode 100644 index 0000000000..6aca22ab2a --- /dev/null +++ b/drivers/ram/sifive/Kconfig @@ -0,0 +1,13 @@ +config RAM_SIFIVE + bool "Ram drivers support for SiFive SoCs" + depends on RAM && RISCV + default y + help + This enables support for ram drivers of SiFive SoCs. + +config SIFIVE_FU540_DDR + bool "SiFive FU540 DDR driver" + depends on RAM_SIFIVE + default y if TARGET_SIFIVE_FU540 + help + This enables DDR support for the platforms based on SiFive FU540 SoC. diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile new file mode 100644 index 0000000000..d66efec264 --- /dev/null +++ b/drivers/ram/sifive/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2020 SiFive, Inc +# + +obj-$(CONFIG_SIFIVE_FU540_DDR) += fu540_ddr.o diff --git a/drivers/ram/sifive/fu540_ddr.c b/drivers/ram/sifive/fu540_ddr.c new file mode 100644 index 0000000000..7ace6447eb --- /dev/null +++ b/drivers/ram/sifive/fu540_ddr.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * (C) Copyright 2020 SiFive, Inc. + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + */ + +#include <common.h> +#include <dm.h> +#include <init.h> +#include <ram.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <clk.h> +#include <wait_bit.h> + +#define DENALI_CTL_0 0 +#define DENALI_CTL_21 21 +#define DENALI_CTL_120 120 +#define DENALI_CTL_132 132 +#define DENALI_CTL_136 136 +#define DENALI_CTL_170 170 +#define DENALI_CTL_181 181 +#define DENALI_CTL_182 182 +#define DENALI_CTL_184 184 +#define DENALI_CTL_208 208 +#define DENALI_CTL_209 209 +#define DENALI_CTL_210 210 +#define DENALI_CTL_212 212 +#define DENALI_CTL_214 214 +#define DENALI_CTL_216 216 +#define DENALI_CTL_224 224 +#define DENALI_CTL_225 225 +#define DENALI_CTL_260 260 + +#define DENALI_PHY_1152 1152 +#define DENALI_PHY_1214 1214 + +#define PAYLOAD_DEST 0x80000000 +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL) + +#define DRAM_CLASS_OFFSET 8 +#define DRAM_CLASS_DDR4 0xA +#define OPTIMAL_RMODW_EN_OFFSET 0 +#define DISABLE_RD_INTERLEAVE_OFFSET 16 +#define OUT_OF_RANGE_OFFSET 1 +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 +#define MC_INIT_COMPLETE_OFFSET 8 +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 +#define DFI_PHY_WRLELV_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 +#define VREF_EN_OFFSET 24 +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 +#define AXI0_ADDRESS_RANGE_ENABLE 8 +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 +#define RDLVL_EN_OFFSET 16 +#define RDLVL_GATE_EN_OFFSET 24 +#define WRLVL_EN_OFFSET 0 + +#define PHY_RX_CAL_DQ0_0_OFFSET 0 +#define PHY_RX_CAL_DQ1_0_OFFSET 16 + +struct fu540_ddrctl { + volatile u32 denali_ctl[265]; +}; + +struct fu540_ddrphy { + volatile u32 denali_phy[1215]; +}; + +/** + * struct fu540_ddr_info + * + * @dev : pointer for the device + * @info : UCLASS RAM information + * @ctl : DDR controller base address + * @phy : DDR PHY base address + * @ctrl : DDR control base address + * @physical_filter_ctrl : DDR physical filter control base address + */ +struct fu540_ddr_info { + struct udevice *dev; + struct ram_info info; + struct fu540_ddrctl *ctl; + struct fu540_ddrphy *phy; + struct clk ddr_clk; + u32 *physical_filter_ctrl; +}; + +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + +struct fu540_ddr_params { + struct fu540_ddrctl pctl_regs; + struct fu540_ddrphy phy_regs; +}; + +struct sifive_dmc_plat { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_sifive_fu540_dmc dtplat; +#else + struct fu540_ddr_params ddr_params; +#endif +}; + +/* + * TODO : It can be possible to use common sdram_copy_to_reg() API + * n: Unit bytes + */ +static void sdram_copy_to_reg(volatile u32 *dest, + volatile u32 *src, u32 n) +{ + int i; + + for (i = 0; i < n / sizeof(u32); i++) { + writel(*src, dest); + src++; + dest++; + } +} + +static void fu540_ddr_setup_range_protection(volatile u32 *ctl, u64 end_addr) +{ + u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; + + writel(0x0, DENALI_CTL_209 + ctl); + writel(end_addr_16kblocks, DENALI_CTL_210 + ctl); + writel(0x0, DENALI_CTL_212 + ctl); + writel(0x0, DENALI_CTL_214 + ctl); + writel(0x0, DENALI_CTL_216 + ctl); + setbits_le32(DENALI_CTL_224 + ctl, + 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); + writel(0xFFFFFFFF, DENALI_CTL_225 + ctl); + setbits_le32(DENALI_CTL_208 + ctl, 0x1 << AXI0_ADDRESS_RANGE_ENABLE); + setbits_le32(DENALI_CTL_208 + ctl, + 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET); +} + +static void fu540_ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl, + u64 ddr_end) +{ + volatile u64 *filterreg = (volatile u64 *)physical_filter_ctrl; + + setbits_le32(DENALI_CTL_0 + ctl, 0x1); + + wait_for_bit_le32((void *)ctl + DENALI_CTL_132, + BIT(MC_INIT_COMPLETE_OFFSET), false, 100, false); + + /* Disable the BusBlocker in front of the controller AXI slave ports */ + filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2); +} + +static void fu540_ddr_check_errata(u32 regbase, u32 updownreg) +{ + u64 fails = 0; + u32 dq = 0; + u32 down, up; + u8 failc0, failc1; + u32 phy_rx_cal_dqn_0_offset; + + for (u32 bit = 0; bit < 2; bit++) { + if (bit == 0) { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ0_0_OFFSET; + } else { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ1_0_OFFSET; + } + + down = (updownreg >> + phy_rx_cal_dqn_0_offset) & 0x3F; + up = (updownreg >> + (phy_rx_cal_dqn_0_offset + 6)) & + 0x3F; + + failc0 = ((down == 0) && (up == 0x3F)); + failc1 = ((up == 0) && (down == 0x3F)); + + /* print error message on failure */ + if (failc0 || failc1) { + if (fails == 0) + printf("DDR error in fixing up\n"); + + fails |= (1 << dq); + + char slicelsc = '0'; + char slicemsc = '0'; + + slicelsc += (dq % 10); + slicemsc += (dq / 10); + printf("S "); + printf("%c", slicemsc); + printf("%c", slicelsc); + + if (failc0) + printf("U"); + else + printf("D"); + + printf("\n"); + } + dq++; + } +} + +static u64 fu540_ddr_phy_fixup(volatile u32 *ddrphyreg) +{ + u32 slicebase = 0; + + /* check errata condition */ + for (u32 slice = 0; slice < 8; slice++) { + u32 regbase = slicebase + 34; + + for (u32 reg = 0; reg < 4; reg++) { + u32 updownreg = readl(regbase + reg + ddrphyreg); + + fu540_ddr_check_errata(regbase, updownreg); + } + slicebase += 128; + } + + return(0); +} + +static u32 fu540_ddr_get_dram_class(volatile u32 *ctl) +{ + u32 reg = readl(DENALI_CTL_0 + ctl); + + return ((reg >> DRAM_CLASS_OFFSET) & 0xF); +} + +static int fu540_ddr_setup(struct udevice *dev) +{ + struct fu540_ddr_info *priv = dev_get_priv(dev); + struct sifive_dmc_plat *plat = dev_get_platdata(dev); + struct fu540_ddr_params *params = &plat->ddr_params; + volatile u32 *denali_ctl = priv->ctl->denali_ctl; + volatile u32 *denali_phy = priv->phy->denali_phy; + const u64 ddr_size = DDR_MEM_SIZE; + const u64 ddr_end = PAYLOAD_DEST + ddr_size; + int ret, i; + u32 physet; + + ret = dev_read_u32_array(dev, "sifive,ddr-params", + (u32 *)&plat->ddr_params, + sizeof(plat->ddr_params) / sizeof(u32)); + if (ret) { + printf("%s: Cannot read sifive,ddr-params %d\n", + __func__, ret); + return ret; + } + + sdram_copy_to_reg(priv->ctl->denali_ctl, + params->pctl_regs.denali_ctl, + sizeof(struct fu540_ddrctl)); + + /* phy reset */ + for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) { + physet = params->phy_regs.denali_phy[i]; + priv->phy->denali_phy[i] = physet; + } + + for (i = 0; i < DENALI_PHY_1152; i++) { + physet = params->phy_regs.denali_phy[i]; + priv->phy->denali_phy[i] = physet; + } + + /* Disable read interleave DENALI_CTL_120 */ + setbits_le32(DENALI_CTL_120 + denali_ctl, + 1 << DISABLE_RD_INTERLEAVE_OFFSET); + + /* Disable optimal read/modify/write logic DENALI_CTL_21 */ + clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << OPTIMAL_RMODW_EN_OFFSET); + + /* Enable write Leveling DENALI_CTL_170 */ + setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET) + | (1 << DFI_PHY_WRLELV_MODE_OFFSET)); + + /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */ + setbits_le32(DENALI_CTL_181 + denali_ctl, + 1 << DFI_PHY_RDLVL_MODE_OFFSET); + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_EN_OFFSET); + + /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */ + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_GATE_EN_OFFSET); + setbits_le32(DENALI_CTL_182 + denali_ctl, + 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); + + if (fu540_ddr_get_dram_class(denali_ctl) == DRAM_CLASS_DDR4) { + /* Enable vref training DENALI_CTL_184 */ + setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET); + } + + /* Mask off leveling completion interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, + 1 << LEVELING_OPERATION_COMPLETED_OFFSET); + + /* Mask off MC init complete interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << MC_INIT_COMPLETE_OFFSET); + + /* Mask off out of range interrupts DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << OUT_OF_RANGE_OFFSET) + | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET)); + + /* set up range protection */ + fu540_ddr_setup_range_protection(denali_ctl, DDR_MEM_SIZE); + + /* Mask off port command error interrupt DENALI_CTL_136 */ + setbits_le32(DENALI_CTL_136 + denali_ctl, + 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET); + + fu540_ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end); + + fu540_ddr_phy_fixup(denali_phy); + + /* check size */ + priv->info.size = get_ram_size((long *)priv->info.base, + DDR_MEM_SIZE); + + debug("%s : %lx\n", __func__, priv->info.size); + + /* check memory access for all memory */ + if (priv->info.size != DDR_MEM_SIZE) { + printf("DDR invalid size : 0x%lx, expected 0x%lx\n", + priv->info.size, DDR_MEM_SIZE); + return -EINVAL; + } + + return 0; +} +#endif + +static int fu540_ddr_probe(struct udevice *dev) +{ + struct fu540_ddr_info *priv = dev_get_priv(dev); + +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + struct regmap *map; + int ret; + u32 clock = 0; + + debug("FU540 DDR probe\n"); + priv->dev = dev; + + ret = regmap_init_mem(dev_ofnode(dev), &map); + if (ret) + return ret; + + ret = clk_get_by_index(dev, 0, &priv->ddr_clk); + if (ret) { + debug("clk get failed %d\n", ret); + return ret; + } + + ret = dev_read_u32(dev, "clock-frequency", &clock); + if (ret) { + debug("clock-frequency not found in dt %d\n", ret); + return ret; + } else { + ret = clk_set_rate(&priv->ddr_clk, clock); + if (ret < 0) { + debug("Could not set DDR clock\n"); + return ret; + } + } + + ret = clk_enable(&priv->ddr_clk); + priv->ctl = regmap_get_range(map, 0); + priv->phy = regmap_get_range(map, 1); + priv->physical_filter_ctrl = regmap_get_range(map, 2); + + priv->info.base = CONFIG_SYS_SDRAM_BASE; + + priv->info.size = 0; + return fu540_ddr_setup(dev); +#else + priv->info.base = CONFIG_SYS_SDRAM_BASE; + priv->info.size = DDR_MEM_SIZE; +#endif + return 0; +} + +static int fu540_ddr_get_info(struct udevice *dev, struct ram_info *info) +{ + struct fu540_ddr_info *priv = dev_get_priv(dev); + + *info = priv->info; + + return 0; +} + +static struct ram_ops fu540_ddr_ops = { + .get_info = fu540_ddr_get_info, +}; + +static const struct udevice_id fu540_ddr_ids[] = { + { .compatible = "sifive,fu540-c000-ddr" }, + { } +}; + +U_BOOT_DRIVER(fu540_ddr) = { + .name = "fu540_ddr", + .id = UCLASS_RAM, + .of_match = fu540_ddr_ids, + .ops = &fu540_ddr_ops, + .probe = fu540_ddr_probe, + .priv_auto_alloc_size = sizeof(struct fu540_ddr_info), +#if defined(CONFIG_TPL_BUILD) || \ + (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + .platdata_auto_alloc_size = sizeof(struct sifive_dmc_plat), +#endif +};
Add driver for fu540 to support ddr initialization in SPL. This driver is based on FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> --- board/sifive/fu540/Kconfig | 2 + drivers/ram/Kconfig | 1 + drivers/ram/Makefile | 2 + drivers/ram/sifive/Kconfig | 13 + drivers/ram/sifive/Makefile | 6 + drivers/ram/sifive/fu540_ddr.c | 417 +++++++++++++++++++++++++++++++++ 6 files changed, 441 insertions(+) create mode 100644 drivers/ram/sifive/Kconfig create mode 100644 drivers/ram/sifive/Makefile create mode 100644 drivers/ram/sifive/fu540_ddr.c