@@ -46,6 +46,28 @@ config GPIO_HOG
is a mechanism providing automatic GPIO request and config-
uration as part of the gpio-controller's driver probe function.
+config DM_GPIO_LOOKUP_LABEL
+ bool "Enable searching for gpio labelnames"
+ depends on DM_GPIO
+ default y
+ help
+ This option enables searching for gpio names in
+ the defined gpio labels, if the search for the
+ gpio bank name failed. This makes sense if you use
+ different gpios on different hardware versions
+ for the same functionality in board code.
+
+config SPL_DM_GPIO_LOOKUP_LABEL
+ bool "Enable searching for gpio labelnames"
+ depends on DM_GPIO && SPL_DM && SPL_GPIO_SUPPORT
+ default n
+ help
+ This option enables searching for gpio names in
+ the defined gpio labels, if the search for the
+ gpio bank name failed. This makes sense if you use
+ different gpios on different hardware versions
+ for the same functionality in board code.
+
config ALTERA_PIO
bool "Altera PIO driver"
depends on DM_GPIO
@@ -67,6 +67,46 @@ static int gpio_to_device(unsigned int gpio, struct gpio_desc *desc)
return ret ? ret : -ENOENT;
}
+#if CONFIG_IS_ENABLED(DM_GPIO_LOOKUP_LABEL)
+/**
+ * dm_gpio_lookup_label() - look for name in gpio device
+ *
+ * search in uc_priv, if there is a gpio with labelname same
+ * as name.
+ *
+ * @name: name which is searched
+ * @uc_priv: gpio_dev_priv pointer.
+ * @offset: gpio offset within the device
+ * @return: 0 if found, -ENOENT if not.
+ */
+static int
+dm_gpio_lookup_label(const char *name, struct gpio_dev_priv *uc_priv,
+ ulong *offset)
+{
+ int len;
+ int i;
+
+ *offset = -1;
+ len = strlen(name);
+ for (i = 0; i < uc_priv->gpio_count; i++) {
+ if (!uc_priv->name[i])
+ continue;
+ if (!strncmp(name, uc_priv->name[i], len)) {
+ *offset = i;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+#else
+static int
+dm_gpio_lookup_label(const char *name, struct gpio_dev_priv *uc_priv,
+ ulong *offset)
+{
+ return -ENOENT;
+}
+#endif
+
int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc)
{
struct gpio_dev_priv *uc_priv = NULL;
@@ -95,6 +135,13 @@ int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc)
if (!strict_strtoul(name + len, 10, &offset))
break;
}
+
+ /*
+ * if we did not found a gpio through its bank
+ * name, we search for a valid gpio label.
+ */
+ if (!dm_gpio_lookup_label(name, uc_priv, &offset))
+ break;
}
if (!dev)
@@ -131,6 +131,13 @@ static int dm_test_gpio(struct unit_test_state *uts)
ut_assertok(dm_gpio_set_value(desc, 0));
ut_asserteq(0, dm_gpio_get_value(desc));
+ /* Check if lookup for labels work */
+ ut_assertok(gpio_lookup_name("hog_input_active_low", &dev, &offset,
+ &gpio));
+ ut_asserteq_str(dev->name, "base-gpios");
+ ut_asserteq(0, offset);
+ ut_asserteq(CONFIG_SANDBOX_GPIO_COUNT + 0, gpio);
+
return 0;
}
DM_TEST(dm_test_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition. This is useful for example if you have a wp pin on different gpios on different board versions. If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions. Signed-off-by: Heiko Schocher <hs at denx.de> --- Example on the aristainetos board: => gpio clear wp_spi_nor.gpio-hog gpio: pin wp_spi_nor.gpio-hog (gpio 47) value is 0 => before this patch, you need to know where your pin is: => gpio clear GPIO2_15 gpio: pin GPIO2_15 (gpio 47) value is 0 => travis build: Changes in v4: - rebased to current master ac14bc4169 Changes in v3: - add comment from Simon Glass make this new function configurable through Kconfig option DM_GPIO_LOOKUP_LABEL Changes in v2: - add comment from Simon Glass move code into seperate function dm_gpio_lookup_label() add test if dm_gpio_lookup_label() works drivers/gpio/Kconfig | 22 ++++++++++++++++++ drivers/gpio/gpio-uclass.c | 47 ++++++++++++++++++++++++++++++++++++++ test/dm/gpio.c | 7 ++++++ 3 files changed, 76 insertions(+)