diff mbox series

[v8,11/21] clk: sifive: fu540-prci: Add ehternet clock initialization in SPL

Message ID 20200509143037.26009-12-pragnesh.patel@sifive.com
State New
Headers show
Series RISC-V SiFive FU540 support SPL | expand

Commit Message

Pragnesh Patel May 9, 2020, 2:30 p.m. UTC 
Add ehternet clock initialization for SPL

Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
 drivers/clk/sifive/fu540-prci.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index 033562274e..e7ceda0dcf 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -41,6 +41,8 @@ 
 #include <linux/clk/analogbits-wrpll-cln28hpc.h>
 #include <dt-bindings/clock/sifive-fu540-prci.h>
 
+#define MHz		1000000
+
 /*
  * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
  *     hfclk and rtcclk
@@ -709,6 +711,29 @@  static int sifive_fu540_prci_disable(struct clk *clk)
 	return ret;
 }
 
+#ifdef CONFIG_SPL_BUILD
+static void ethernet_init(struct udevice *dev)
+{
+	u32 v;
+	struct clk clock;
+	struct __prci_data *pd = dev_get_priv(dev);
+
+	/* GEMGXL init */
+	clock.id = PRCI_CLK_GEMGXLPLL;
+	sifive_fu540_prci_set_rate(&clock, 125UL * MHz);
+	sifive_fu540_prci_clock_enable(&__prci_init_clocks[clock.id], 1);
+
+	/* Release GEMGXL reset */
+	v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET);
+	v |= PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK;
+	__prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd);
+
+	/* Procmon => core clock */
+	__prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET,
+			pd);
+}
+#endif
+
 static int sifive_fu540_prci_probe(struct udevice *dev)
 {
 	int i, err;
@@ -734,6 +759,10 @@  static int sifive_fu540_prci_probe(struct udevice *dev)
 			__prci_wrpll_read_cfg0(pd, pc->pwd);
 	}
 
+#ifdef CONFIG_SPL_BUILD
+	ethernet_init(dev);
+#endif
+
 	return 0;
 }