@@ -314,26 +314,23 @@ static inline int is_10g_interface(phy_interface_t interface)
/**
* phy_init() - Initializes the PHY drivers
- *
* This function registers all available PHY drivers
*
- * @return 0 if OK, -ve on error
+ * @return: 0 if OK, -ve on error
*/
int phy_init(void);
/**
* phy_reset() - Resets the specified PHY
- *
* Issues a reset of the PHY and waits for it to complete
*
* @phydev: PHY to reset
- * @return 0 if OK, -ve on error
+ * @return: 0 if OK, -ve on error
*/
int phy_reset(struct phy_device *phydev);
/**
* phy_find_by_mask() - Searches for a PHY on the specified MDIO bus
- *
* The function checks the PHY addresses flagged in phy_mask and returns a
* phy_device pointer if it detects a PHY.
* This function should only be called if just one PHY is expected to be present
@@ -343,7 +340,7 @@ int phy_reset(struct phy_device *phydev);
* @bus: MII/MDIO bus to scan
* @phy_mask: bitmap of PYH addresses to scan
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
phy_interface_t interface);
@@ -359,7 +356,6 @@ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev);
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
- *
* Creates a PHY device for the PHY at the given address, if one doesn't exist
* already, and associates it with the Ethernet device.
* The function may be called with addr <= 0, in this case addr value is ignored
@@ -371,7 +367,7 @@ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev);
* @addr: PHY address on MDIO bus
* @dev: Ethernet device to associate to the PHY
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct udevice *dev,
@@ -395,7 +391,6 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
- *
* Creates a PHY device for the PHY at the given address, if one doesn't exist
* already, and associates it with the Ethernet device.
* The function may be called with addr <= 0, in this case addr value is ignored
@@ -407,7 +402,7 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
* @addr: PHY address on MDIO bus
* @dev: Ethernet device to associate to the PHY
* @interface: type of MAC-PHY interface
- * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ * @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct eth_device *dev,
@@ -467,7 +462,7 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
* phy_get_interface_by_name() - Look up a PHY interface name
*
* @str: PHY interface name, e.g. "mii"
- * @return PHY_INTERFACE_MODE_... value, or -1 if not found
+ * @return: PHY_INTERFACE_MODE_... value, or -1 if not found
*/
int phy_get_interface_by_name(const char *str);
@@ -475,6 +470,7 @@ int phy_get_interface_by_name(const char *str);
* phy_interface_is_rgmii - Convenience function for testing if a PHY interface
* is RGMII (all variants)
* @phydev: the phy_device struct
+ * @return: true if MII bus is RGMII or false if it is not
*/
static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
{
@@ -486,6 +482,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
* phy_interface_is_sgmii - Convenience function for testing if a PHY interface
* is SGMII (all variants)
* @phydev: the phy_device struct
+ * @return: true if MII bus is SGMII or false if it is not
*/
static inline bool phy_interface_is_sgmii(struct phy_device *phydev)
{