@@ -5,6 +5,29 @@
/dts-v1/;
+#include <dt-bindings/memory/bcm-ns3-mc.h>
+
+/*
+ * Single mem reserve region which includes the following:
+ * Components name Start Addr Size
+ * ------------------------------------------------
+ * GIC LPI tables 0x8AD7_0000 0x0009_0000
+ * Nitro FW 0x8AE0_0000 0x0020_0000
+ * Nitro Crash dump 0x8B00_0000 0x0200_0000
+ * OPTEE OS 0x8D00_0000 0x0200_0000
+ * BL31 services 0x8F00_0000 0x0010_0000
+ * Tmon 0x8F10_0000 0x0000_1000
+ * LPM/reserved 0x8F10_1000 0x0000_1000
+ * ATF to Bl33 info 0x8F10_2000 0x0000_1000
+ * ATF error logs 0x8F10_3000 0x0001_0000
+ * Error log parser 0x8F11_3000 0x0010_0000
+ */
+
+/memreserve/ BCM_NS3_MEM_RSVE_START BCM_NS3_MEM_RSVE_END;
+
+/* CRMU page tables */
+/memreserve/ BCM_NS3_CRMU_PGT_START BCM_NS3_CRMU_PGT_SIZE;
+
#include "ns3.dtsi"
/ {
@@ -13,6 +13,9 @@
#include <asm/system.h>
#include <dt-bindings/memory/bcm-ns3-mc.h>
#include <fdtdec.h>
+#include <fdt_support.h>
+
+#define BANK_OFFSET(bank) ((u64)BCM_NS3_DDR_INFO_BASE + 8 + ((bank) * 16))
static struct mm_region ns3_mem_map[] = {
{
@@ -23,9 +26,15 @@ static struct mm_region ns3_mem_map[] = {
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
- .virt = 0x80000000UL,
- .phys = 0x80000000UL,
- .size = 0x80000000UL,
+ .virt = BCM_NS3_MEM_START,
+ .phys = BCM_NS3_MEM_START,
+ .size = BCM_NS3_MEM_LEN,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = BCM_NS3_BANK_1_MEM_START,
+ .phys = BCM_NS3_BANK_1_MEM_START,
+ .size = BCM_NS3_BANK_1_MEM_LEN,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
@@ -44,6 +53,72 @@ DECLARE_GLOBAL_DATA_PTR;
*/
struct bl33_info *bl33_info __section(".data");
+/*
+ * Run modulo 256 checksum calculation and return the calculated checksum
+ */
+static u8 checksum_calc(u8 *p, unsigned int len)
+{
+ unsigned int i;
+ u8 chksum = 0;
+
+ for (i = 0; i < len; i++)
+ chksum += p[i];
+
+ return chksum;
+}
+
+/*
+ * This function parses the memory layout informaion from a reserved area in
+ * DDR, and then fix up the FDT before passing it to Linux.
+ *
+ * In the case of error, do nothing and the default memory layout in DT will
+ * be used
+ */
+static void mem_info_parse_fixup(void *fdt)
+{
+ u32 *p32, sig, i, nr_banks;
+ u64 *p64;
+ u64 start[BCM_NS3_MAX_NR_BANKS];
+ u64 len[BCM_NS3_MAX_NR_BANKS];
+
+ /* validate signature */
+ p32 = (u32 *)BCM_NS3_DDR_INFO_BASE;
+ sig = *p32;
+ if (sig != BCM_NS3_DDR_INFO_SIG) {
+ printf("DDR info signature 0x%x invalid\n", sig);
+ return;
+ }
+
+ /* run checksum test to validate data */
+ if (checksum_calc((u8 *)p32, BCM_NS3_DDR_INFO_LEN) != 0) {
+ printf("Checksum on DDR info failed\n");
+ return;
+ }
+
+ /* parse information for each bank */
+ nr_banks = 0;
+ for (i = 0; i < BCM_NS3_MAX_NR_BANKS; i++) {
+ /* skip banks with a length of zero */
+ p64 = (u64 *)BANK_OFFSET(i);
+ if (*(p64 + 1) == 0)
+ continue;
+
+ start[i] = *p64;
+ len[i] = *(p64 + 1);
+
+ printf("mem[%u] 0x%llx - 0x%llx\n", i, start[i],
+ start[i] + len[i] - 1);
+ nr_banks++;
+ }
+
+ if (!nr_banks) {
+ printf("No DDR banks detected\n");
+ return;
+ }
+
+ fdt_fixup_memory_banks(fdt, start, len, nr_banks);
+}
+
int board_init(void)
{
if (bl33_info->version != BL33_INFO_VERSION)
@@ -98,6 +173,8 @@ int ft_board_setup(void *fdt, bd_t *bd)
{
gic_lpi_tables_init(BCM_NS3_GIC_LPI_BASE, MAX_GIC_REDISTRIBUTORS);
+ mem_info_parse_fixup(fdt);
+
return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
@@ -4,6 +4,7 @@ CONFIG_TARGET_BCMNS3=y
CONFIG_SYS_TEXT_BASE=0xFF000000
CONFIG_ENV_SIZE=0x80000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_OF_BOARD_SETUP=y
CONFIG_LOGLEVEL=7
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
@@ -21,3 +22,4 @@ CONFIG_CLK=y
CONFIG_CLK_CCF=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
+CONFIG_SPL_OF_LIBFDT=y