| Message ID | 20200331004851.282583-10-marex@denx.de |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: stm32: Fix Avenger96 | expand |
Hi Marek On 3/31/20 2:48 AM, Marek Vasut wrote: > Add another mux option for DWMAC RGMII, this is used on AV96 board. > > Signed-off-by: Marek Vasut <marex at denx.de> > Cc: Patrick Delaunay <patrick.delaunay at st.com> > Cc: Patrice Chotard <patrice.chotard at st.com> Reviewed-by: Patrice Chotard <patrice.chotard at st.com> Thanks > --- > V2: No change > --- > arch/arm/dts/stm32mp157-pinctrl.dtsi | 51 ++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi > index 964e4910ec..422dad1ddd 100644 > --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi > +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi > @@ -288,6 +288,57 @@ > }; > }; > > + ethernet0_rgmii_pins_b: rgmii-1 { > + pins1 { > + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ > + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ > + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ > + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ > + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ > + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ > + <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */ > + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ > + bias-disable; > + drive-push-pull; > + slew-rate = <2>; > + }; > + pins2 { > + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ > + bias-disable; > + drive-push-pull; > + slew-rate = <0>; > + }; > + pins3 { > + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ > + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ > + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ > + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ > + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ > + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ > + bias-disable; > + }; > + }; > + > + ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 { > + pins1 { > + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ > + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ > + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ > + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ > + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ > + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ > + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ > + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ > + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ > + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ > + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ > + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ > + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ > + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ > + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ > + }; > + }; > + > fmc_pins_a: fmc-0 { > pins1 { > pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
Hi Marek, > From: Marek Vasut <marex at denx.de> > Sent: mardi 31 mars 2020 02:49 > > Add another mux option for DWMAC RGMII, this is used on AV96 board. > > Signed-off-by: Marek Vasut <marex at denx.de> > Cc: Patrick Delaunay <patrick.delaunay at st.com> > Cc: Patrice Chotard <patrice.chotard at st.com> > --- > V2: No change > --- Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com> Thanks Patrick
diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 964e4910ec..422dad1ddd 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -288,6 +288,57 @@ }; }; + ethernet0_rgmii_pins_b: rgmii-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
Add another mux option for DWMAC RGMII, this is used on AV96 board. Signed-off-by: Marek Vasut <marex at denx.de> Cc: Patrick Delaunay <patrick.delaunay at st.com> Cc: Patrice Chotard <patrice.chotard at st.com> --- V2: No change --- arch/arm/dts/stm32mp157-pinctrl.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)