diff mbox series

[v3,05/29] tpm: cr50: Use the correct GPIO binding

Message ID 20200330171226.v3.5.Iffff549a1b63fedb9e8ec87cdc5e9e28478a4587@changeid
State Accepted
Commit 32e8ee004a3dad1a9cc06bd3ac44d8ba562afc3e
Headers show
Series dm: Add programmatic generation of ACPI tables (part A) | expand

Commit Message

Simon Glass March 30, 2020, 11:12 p.m. UTC 
This device should use ready-gpios rather than ready-gpio. Fix it.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v3: None
Changes in v2: None

 arch/x86/dts/chromebook_coral.dts                               | 2 +-
 doc/device-tree-bindings/gpio/intel,apl-gpio.txt                | 2 +-
 .../interrupt-controller/intel,acpi-gpe.txt                     | 2 +-
 drivers/tpm/cr50_i2c.c                                          | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
index af52e11c89a..d48ef3573ec 100644
--- a/arch/x86/dts/chromebook_coral.dts
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -292,7 +292,7 @@ 
 				reg = <0x50>;
 				compatible = "google,cr50";
 				u-boot,i2c-offset-len = <0>;
-				ready-gpio = <&gpio_n 28 GPIO_ACTIVE_LOW>;
+				ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
 				interrupts-extended = <&acpi_gpe 0x3c 0>;
 			};
 		};
diff --git a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt
index cf0659b70ec..8422ff63abd 100644
--- a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt
+++ b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt
@@ -47,7 +47,7 @@  Example:
 			reg = <0x50>;
 			compatible = "google,cr50";
 			u-boot,i2c-offset-len = <0>;
-			ready-gpio = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>;
+			ready-gpios = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff --git a/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt b/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt
index d9252bf29f7..2fe02d8a227 100644
--- a/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt
+++ b/doc/device-tree-bindings/interrupt-controller/intel,acpi-gpe.txt
@@ -25,6 +25,6 @@  Example:
 	tpm at 50 {
 		reg = <0x50>;
 		compatible = "google,cr50";
-		ready-gpio = <&gpio_n 0x1c GPIO_ACTIVE_LOW>;
+		ready-gpios = <&gpio_n 0x1c GPIO_ACTIVE_LOW>;
 		interrupts-extended = <&acpi_gpe 0x3c 0>;
 	};
diff --git a/drivers/tpm/cr50_i2c.c b/drivers/tpm/cr50_i2c.c
index c1d2d2fa381..b67051af26a 100644
--- a/drivers/tpm/cr50_i2c.c
+++ b/drivers/tpm/cr50_i2c.c
@@ -607,7 +607,7 @@  static int cr50_i2c_ofdata_to_platdata(struct udevice *dev)
 		priv->irq = irq;
 		priv->use_irq = true;
 	} else {
-		ret = gpio_request_by_name(dev, "ready-gpio", 0,
+		ret = gpio_request_by_name(dev, "ready-gpios", 0,
 					   &priv->ready_gpio, GPIOD_IS_IN);
 		if (ret) {
 			log_warning("Cr50 does not have an ready GPIO/interrupt (err=%d)\n",