@@ -14,6 +14,11 @@
#include <asm/io.h>
#include <asm/armv8/mmu.h>
#include <linux/sizes.h>
+#include <usb.h>
+#include <linux/usb/otg.h>
+#include <asm/arch/usb-gx.h>
+#include <usb/dwc2_udc.h>
+#include <clk.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -149,3 +154,116 @@ void meson_eth_init(phy_interface_t mode, unsigned int flags)
/* Enable power gate */
clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
}
+
+#if CONFIG_IS_ENABLED(USB_XHCI_DWC3_OF_SIMPLE) && \
+ CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
+static struct dwc2_plat_otg_data meson_gx_dwc2_data;
+static struct phy usb_phys[2];
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ struct ofnode_phandle_args args;
+ struct udevice *clk_dev;
+ ofnode dwc2_node;
+ struct clk clk;
+ int ret, i;
+ u32 val;
+
+ /* find the dwc2 node */
+ dwc2_node = ofnode_by_compatible(ofnode_null(), "snps,dwc2");
+ if (!ofnode_valid(dwc2_node)) {
+ debug("Not found dwc2 node\n");
+ return -ENODEV;
+ }
+
+ if (!ofnode_is_available(dwc2_node)) {
+ debug("dwc2 is disabled in the device tree\n");
+ return -ENODEV;
+ }
+
+ /* get the PHYs */
+ for (i = 0; i < 2; i++) {
+ ret = generic_phy_get_by_node(dwc2_node, i, &usb_phys[i]);
+ if (ret && ret != -ENOENT) {
+ pr_err("Failed to get USB PHY%d for %s\n",
+ i, ofnode_get_name(dwc2_node));
+ return ret;
+ }
+ }
+
+ for (i = 0; i < 2; i++) {
+ ret = generic_phy_init(&usb_phys[i]);
+ if (ret) {
+ pr_err("Can't init USB PHY%d for %s\n",
+ i, ofnode_get_name(dwc2_node));
+ return ret;
+ }
+ }
+
+ for (i = 0; i < 2; i++) {
+ ret = generic_phy_power_on(&usb_phys[i]);
+ if (ret) {
+ pr_err("Can't power USB PHY%d for %s\n",
+ i, ofnode_get_name(dwc2_node));
+ return ret;
+ }
+ }
+
+ phy_meson_gxl_usb3_set_mode(&usb_phys[0], USB_DR_MODE_PERIPHERAL);
+ phy_meson_gxl_usb2_set_mode(&usb_phys[1], USB_DR_MODE_PERIPHERAL);
+
+ meson_gx_dwc2_data.regs_otg = ofnode_get_addr(dwc2_node);
+ if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
+ debug("usbotg: can't get base address\n");
+ return -ENODATA;
+ }
+
+ /* Enable clock */
+ ret = ofnode_parse_phandle_with_args(dwc2_node, "clocks",
+ "#clock-cells", 0, 0, &args);
+ if (ret) {
+ debug("usbotg has no clocks defined in the device tree\n");
+ return ret;
+ }
+
+ ret = uclass_get_device_by_ofnode(UCLASS_CLK, args.node, &clk_dev);
+ if (ret)
+ return ret;
+
+ if (args.args_count != 1) {
+ debug("Can't find clock ID in the device tree\n");
+ return -ENODATA;
+ }
+
+ clk.dev = clk_dev;
+ clk.id = args.args[0];
+
+ ret = clk_enable(&clk);
+ if (ret) {
+ debug("Failed to enable usbotg clock\n");
+ return ret;
+ }
+
+ ofnode_read_u32(dwc2_node, "g-rx-fifo-size", &val);
+ meson_gx_dwc2_data.rx_fifo_sz = val;
+ ofnode_read_u32(dwc2_node, "g-np-tx-fifo-size", &val);
+ meson_gx_dwc2_data.np_tx_fifo_sz = val;
+ ofnode_read_u32(dwc2_node, "g-tx-fifo-size", &val);
+ meson_gx_dwc2_data.tx_fifo_sz = val;
+
+ return dwc2_udc_probe(&meson_gx_dwc2_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ int i;
+
+ phy_meson_gxl_usb3_set_mode(&usb_phys[0], USB_DR_MODE_HOST);
+ phy_meson_gxl_usb3_set_mode(&usb_phys[1], USB_DR_MODE_HOST);
+
+ for (i = 0; i < 2; i++)
+ usb_phys[i].dev = NULL;
+
+ return 0;
+}
+#endif
Add arch code to initialize USB Gadget mode using the DWC2 controller, and using the previously added set_mode() phy functions. Signed-off-by: Neil Armstrong <narmstrong at baylibre.com> --- arch/arm/mach-meson/board-gx.c | 118 +++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+)