| Message ID | 20200329170538.25449-14-pragnesh.patel@sifive.com |
|---|---|
| State | New |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig index 6d61e6c960..4fa4e1520f 100644 --- a/configs/sifive_fu540_defconfig +++ b/configs/sifive_fu540_defconfig @@ -12,3 +12,14 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SPL_CLK=y +CONFIG_SPL_PAYLOAD="u-boot.itb" +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_SIFIVE_FU540_DDR=y
With sifive_fu540_defconfig: User can use FSBL or u-boot-spl.bin anyone at a time. For FSBL, fsbl->fw_payload.bin(opensbi+u-boot) For u-boot-spl.bin, u-boot-spl.bin->FIT image(opensbi+u-boot+dtb) U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from 1st partition of SD card (replace fw_payload.bin with u-boot.itb) into RAM. U-Boot SPL expects u-boot.itb FIT image in the 1st partition of SD card irrespective of GUID Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> --- configs/sifive_fu540_defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)