@@ -54,6 +54,7 @@
reg = <1>;
riscv,isa = "rv64imafdc";
tlb-split;
+ next-level-cache = <&l2cache>;
cpu1_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -77,6 +78,7 @@
reg = <2>;
riscv,isa = "rv64imafdc";
tlb-split;
+ next-level-cache = <&l2cache>;
cpu2_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -100,6 +102,7 @@
reg = <3>;
riscv,isa = "rv64imafdc";
tlb-split;
+ next-level-cache = <&l2cache>;
cpu3_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -123,6 +126,7 @@
reg = <4>;
riscv,isa = "rv64imafdc";
tlb-split;
+ next-level-cache = <&l2cache>;
cpu4_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -162,6 +166,13 @@
clocks = <&prci PRCI_CLK_TLCLK>;
status = "disabled";
};
+ dma: dma at 3000000 {
+ compatible = "sifive,fu540-c000-pdma";
+ reg = <0x0 0x3000000 0x0 0x8000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <23 24 25 26 27 28 29 30>;
+ #dma-cells = <1>;
+ };
uart1: serial at 10011000 {
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
reg = <0x0 0x10011000 0x0 0x1000>;
@@ -246,6 +257,30 @@
#pwm-cells = <3>;
status = "disabled";
};
-
+ l2cache: cache-controller at 2010000 {
+ compatible = "sifive,fu540-c000-ccache", "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <1024>;
+ cache-size = <2097152>;
+ cache-unified;
+ interrupt-parent = <&plic0>;
+ interrupts = <1 2 3>;
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ };
+ gpio: gpio at 10060000 {
+ compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+ interrupt-parent = <&plic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>,
+ <14>, <15>, <16>, <17>, <18>, <19>, <20>,
+ <21>, <22>;
+ reg = <0x0 0x10060000 0x0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ status = "disabled";
+ };
};
};
@@ -2,6 +2,7 @@
/* Copyright (c) 2018-2019 SiFive, Inc */
#include "fu540-c000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
@@ -41,6 +42,10 @@
clock-frequency = <RTCCLK_FREQ>;
clock-output-names = "rtcclk";
};
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
};
&uart0 {
@@ -94,3 +99,7 @@
&pwm1 {
status = "okay";
};
+
+&gpio {
+ status = "okay";
+};
This sync has changes required to use GPIO in U-Boot and U-Boot SPL. Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> --- arch/riscv/dts/fu540-c000.dtsi | 37 ++++++++++++++++++++++++- arch/riscv/dts/hifive-unleashed-a00.dts | 9 ++++++ 2 files changed, 45 insertions(+), 1 deletion(-)