@@ -253,6 +253,12 @@ config MMC_DW_SNPS
This selects support for Synopsys DesignWare Memory Card Interface driver
extensions used in various Synopsys ARC devboards.
+config NEXELL_DWMMC
+ bool "Nexell SD/MMC controller support"
+ depends on ARCH_NEXELL
+ depends on MMC_DW
+ default y
+
config MMC_MESON_GX
bool "Meson GX EMMC controller support"
depends on DM_MMC && BLK && ARCH_MESON
@@ -43,6 +43,7 @@ obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_SH_SDHI) += sh_sdhi.o
obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o
obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
+obj-$(CONFIG_NEXELL_DWMMC) += nexell_dw_mmc_dm.o
# SDHCI
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
new file mode 100644
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ *
+ * (C) Copyright 2019 Stefan Bosch <stefan_b at posteo.net>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <dwmmc.h>
+#include <syscon.h>
+#include <asm/gpio.h>
+#include <asm/arch/nx_gpio.h>
+#include <asm/arch/reset.h>
+
+#define DWMCI_CLKSEL 0x09C
+#define DWMCI_SHIFT_0 0x0
+#define DWMCI_SHIFT_1 0x1
+#define DWMCI_SHIFT_2 0x2
+#define DWMCI_SHIFT_3 0x3
+#define DWMCI_SET_SAMPLE_CLK(x) (x)
+#define DWMCI_SET_DRV_CLK(x) ((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
+#define DWMCI_CLKCTRL 0x114
+#define NX_MMC_CLK_DELAY(x, y, a, b) ((((x) & 0xFF) << 0) |\
+ (((y) & 0x03) << 16) |\
+ (((a) & 0xFF) << 8) |\
+ (((b) & 0x03) << 24))
+
+struct nexell_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct nexell_dwmmc_priv {
+ struct clk *clk;
+ struct dwmci_host host;
+ int fifo_size;
+ bool fifo_mode;
+ int frequency;
+ u32 min_freq;
+ u32 max_freq;
+ int d_delay;
+ int d_shift;
+ int s_delay;
+ int s_shift;
+
+};
+
+struct clk *clk_get(const char *id);
+
+static void set_pin_stat(int index, int bit, int value)
+{
+#if !defined(CONFIG_SPL_BUILD)
+ nx_gpio_set_pad_function(index, bit, value);
+#else
+#if defined(CONFIG_ARCH_S5P4418) || \
+ defined(CONFIG_ARCH_S5P6818)
+
+ unsigned long base[5] = {
+ PHY_BASEADDR_GPIOA, PHY_BASEADDR_GPIOB,
+ PHY_BASEADDR_GPIOC, PHY_BASEADDR_GPIOD,
+ PHY_BASEADDR_GPIOE,
+ };
+
+ dw_mmc_set_pin(base[index], bit, value);
+#endif
+#endif
+}
+
+static void nx_dw_mmc_set_pin(struct dwmci_host *host)
+{
+ debug(" %s(): dev_index == %d", __func__, host->dev_index);
+
+ switch (host->dev_index) {
+ case 0:
+ set_pin_stat(0, 29, 1);
+ set_pin_stat(0, 31, 1);
+ set_pin_stat(1, 1, 1);
+ set_pin_stat(1, 3, 1);
+ set_pin_stat(1, 5, 1);
+ set_pin_stat(1, 7, 1);
+ break;
+ case 1:
+ set_pin_stat(3, 22, 1);
+ set_pin_stat(3, 23, 1);
+ set_pin_stat(3, 24, 1);
+ set_pin_stat(3, 25, 1);
+ set_pin_stat(3, 26, 1);
+ set_pin_stat(3, 27, 1);
+ break;
+ case 2:
+ set_pin_stat(2, 18, 2);
+ set_pin_stat(2, 19, 2);
+ set_pin_stat(2, 20, 2);
+ set_pin_stat(2, 21, 2);
+ set_pin_stat(2, 22, 2);
+ set_pin_stat(2, 23, 2);
+ if (host->buswidth == 8) {
+ set_pin_stat(4, 21, 2);
+ set_pin_stat(4, 22, 2);
+ set_pin_stat(4, 23, 2);
+ set_pin_stat(4, 24, 2);
+ }
+ break;
+ default:
+ debug(" is invalid!");
+ }
+ debug("\n");
+}
+
+static void nx_dw_mmc_clksel(struct dwmci_host *host)
+{
+ u32 val;
+
+#ifdef CONFIG_BOOST_MMC
+ val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
+ DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(1);
+#else
+ val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
+ DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(3);
+#endif
+
+ dwmci_writel(host, DWMCI_CLKSEL, val);
+}
+
+static void nx_dw_mmc_reset(int ch)
+{
+ int rst_id = RESET_ID_SDMMC0 + ch;
+
+ nx_rstcon_setrst(rst_id, 0);
+ nx_rstcon_setrst(rst_id, 1);
+}
+
+static void nx_dw_mmc_clk_delay(struct udevice *dev)
+{
+ unsigned int delay;
+ struct nexell_dwmmc_priv *priv = dev_get_priv(dev);
+ struct dwmci_host *host = &priv->host;
+
+ delay = NX_MMC_CLK_DELAY(priv->d_delay,
+ priv->d_shift, priv->s_delay, priv->s_shift);
+
+ writel(delay, (host->ioaddr + DWMCI_CLKCTRL));
+ debug("%s(): Values set: d_delay==%d, d_shift==%d, s_delay==%d, "
+ "s_shift==%d\n", __func__, priv->d_delay, priv->d_shift,
+ priv->s_delay, priv->s_shift);
+}
+
+static unsigned int nx_dw_mmc_get_clk(struct dwmci_host *host, uint freq)
+{
+ struct clk *clk;
+ struct udevice *dev = host->priv;
+ struct nexell_dwmmc_priv *priv = dev_get_priv(dev);
+
+ int index = host->dev_index;
+ char name[50] = { 0, };
+
+ clk = priv->clk;
+ if (!clk) {
+ sprintf(name, "%s.%d", DEV_NAME_SDHC, index);
+ clk = clk_get((const char *)name);
+ if (!clk)
+ return 0;
+ priv->clk = clk;
+ }
+
+ return clk_get_rate(clk) / 2;
+}
+
+static unsigned long nx_dw_mmc_set_clk(struct dwmci_host *host,
+ unsigned int rate)
+{
+ struct clk *clk;
+ char name[50] = { 0, };
+ struct udevice *dev = host->priv;
+ struct nexell_dwmmc_priv *priv = dev_get_priv(dev);
+
+ int index = host->dev_index;
+
+ clk = priv->clk;
+ if (!clk) {
+ sprintf(name, "%s.%d", DEV_NAME_SDHC, index);
+ clk = clk_get((const char *)name);
+ if (!clk)
+ return 0;
+ priv->clk = clk;
+ }
+
+ clk_disable(clk);
+ rate = clk_set_rate(clk, rate);
+ clk_enable(clk);
+
+ return rate;
+}
+
+static int nexell_dwmmc_ofdata_to_platdata(struct udevice *dev)
+{
+ /* if (dev): *priv = dev->priv, else: *priv = NULL */
+ struct nexell_dwmmc_priv *priv = dev_get_priv(dev);
+ struct dwmci_host *host = &priv->host;
+ int val = -1;
+
+ debug("%s()\n", __func__);
+
+ host->name = dev->name;
+ host->ioaddr = dev_read_addr_ptr(dev);
+
+ val = dev_read_u32_default(dev, "nexell,bus-width", -1);
+ if (val < 0) {
+ debug(" 'nexell,bus-width' missing/invalid!\n");
+ return -EINVAL;
+ }
+ host->buswidth = val;
+ host->get_mmc_clk = nx_dw_mmc_get_clk;
+ host->clksel = nx_dw_mmc_clksel;
+ host->priv = dev;
+
+ val = dev_read_u32_default(dev, "index", -1);
+ if (val < 0) {
+ debug(" 'index' missing/invalid!\n");
+ return -EINVAL;
+ }
+ host->dev_index = val;
+
+ val = dev_read_u32_default(dev, "fifo-size", 0x20);
+ if (val <= 0) {
+ debug(" 'fifo-size' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->fifo_size = val;
+
+ priv->fifo_mode = dev_read_bool(dev, "fifo-mode");
+
+ val = dev_read_u32_default(dev, "frequency", -1);
+ if (val < 0) {
+ debug(" 'frequency' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->frequency = val;
+
+ val = dev_read_u32_default(dev, "max-frequency", -1);
+ if (val < 0) {
+ debug(" 'max-frequency' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->max_freq = val;
+ priv->min_freq = 400000; /* 400 kHz */
+
+ val = dev_read_u32_default(dev, "nexell,drive_dly", -1);
+ if (val < 0) {
+ debug(" 'nexell,drive_dly' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->d_delay = val;
+
+ val = dev_read_u32_default(dev, "nexell,drive_shift", -1);
+ if (val < 0) {
+ debug(" 'nexell,drive_shift' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->d_shift = val;
+
+ val = dev_read_u32_default(dev, "nexell,sample_dly", -1);
+ if (val < 0) {
+ debug(" 'nexell,sample_dly' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->s_delay = val;
+
+ val = dev_read_u32_default(dev, "nexell,sample_shift", -1);
+ if (val < 0) {
+ debug(" 'nexell,sample_shift' missing/invalid!\n");
+ return -EINVAL;
+ }
+ priv->s_shift = val;
+
+ debug(" index==%d, name==%s, ioaddr==0x%08x, buswidth==%d, "
+ "fifo_size==%d, fifo_mode==%d, frequency==%d\n",
+ host->dev_index, host->name, (u32)host->ioaddr,
+ host->buswidth, priv->fifo_size, priv->fifo_mode,
+ priv->frequency);
+ debug(" min_freq==%d, max_freq==%d, delay: "
+ "0x%02x:0x%02x:0x%02x:0x%02x\n",
+ priv->min_freq, priv->max_freq, priv->d_delay,
+ priv->d_shift, priv->s_delay, priv->s_shift);
+
+ return 0;
+}
+
+static int nexell_dwmmc_probe(struct udevice *dev)
+{
+ struct nexell_mmc_plat *plat = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct nexell_dwmmc_priv *priv = dev_get_priv(dev);
+ struct dwmci_host *host = &priv->host;
+ struct udevice *pwr_dev __maybe_unused;
+
+ debug("%s():\n", __func__);
+
+ host->fifoth_val = MSIZE(0x2) |
+ RX_WMARK(priv->fifo_size / 2 - 1) |
+ TX_WMARK(priv->fifo_size / 2);
+
+ host->fifo_mode = priv->fifo_mode;
+
+ dwmci_setup_cfg(&plat->cfg, host, priv->max_freq, priv->min_freq);
+ host->mmc = &plat->mmc;
+ host->mmc->priv = &priv->host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+ nx_dw_mmc_set_pin(host);
+
+ debug(" nx_dw_mmc_set_clk(host, frequency * 4 == %d)\n",
+ priv->frequency * 4);
+ nx_dw_mmc_set_clk(host, priv->frequency * 4);
+
+ nx_dw_mmc_reset(host->dev_index);
+ nx_dw_mmc_clk_delay(dev);
+
+ return dwmci_probe(dev);
+}
+
+static int nexell_dwmmc_bind(struct udevice *dev)
+{
+ struct nexell_mmc_plat *plat = dev_get_platdata(dev);
+
+ return dwmci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id nexell_dwmmc_ids[] = {
+ { .compatible = "nexell,nexell-dwmmc" },
+ { }
+};
+
+U_BOOT_DRIVER(nexell_dwmmc_drv) = {
+ .name = "nexell_dwmmc",
+ .id = UCLASS_MMC,
+ .of_match = nexell_dwmmc_ids,
+ .ofdata_to_platdata = nexell_dwmmc_ofdata_to_platdata,
+ .ops = &dm_dwmci_ops,
+ .bind = nexell_dwmmc_bind,
+ .probe = nexell_dwmmc_probe,
+ .priv_auto_alloc_size = sizeof(struct nexell_dwmmc_priv),
+ .platdata_auto_alloc_size = sizeof(struct nexell_mmc_plat),
+};
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - mmc: nexell_dw_mmc.c changed to nexell_dw_mmc_dm.c (switched to DM). Signed-off-by: Stefan Bosch <stefan_b at posteo.net> --- Changes in v2: - commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm. drivers/mmc/Kconfig | 6 + drivers/mmc/Makefile | 1 + drivers/mmc/nexell_dw_mmc_dm.c | 350 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 357 insertions(+) create mode 100644 drivers/mmc/nexell_dw_mmc_dm.c