@@ -25,44 +25,12 @@ static const struct chip_id chip_ids[] = {
{0, NULL},
};
-/*
- * union ks_tx_hdr - tx header data
- * @txb: The header as bytes
- * @txw: The header as 16bit, little-endian words
- *
- * A dual representation of the tx header data to allow
- * access to individual bytes, and to allow 16bit accesses
- * with 16bit alignment.
- */
-union ks_tx_hdr {
- u8 txb[4];
- __le16 txw[2];
-};
-
/*
* struct ks_net - KS8851 driver private data
- * @net_device : The network device we're bound to
- * @txh : temporaly buffer to save status/length.
* @frame_head_info : frame header information for multi-pkt rx.
- * @statelock : Lock on this structure for tx list.
- * @msg_enable : The message flags controlling driver output (see ethtool).
- * @frame_cnt : number of frames received.
* @bus_width : i/o bus width.
- * @irq : irq number assigned to this device.
- * @rc_txcr : Cached copy of KS_TXCR.
- * @rc_ier : Cached copy of KS_IER.
* @sharedbus : Multipex(addr and data bus) mode indicator.
- * @cmd_reg_cache : command register cached.
- * @cmd_reg_cache_int : command register cached. Used in the irq handler.
- * @promiscuous : promiscuous mode indicator.
- * @all_mcast : mutlicast indicator.
- * @mcast_lst_size : size of multicast list.
- * @mcast_lst : multicast list.
- * @mcast_bits : multicast enabed.
- * @mac_addr : MAC address assigned to this device.
- * @fid : frame id.
* @extra_byte : number of extra byte prepended rx pkt.
- * @enabled : indicator this device works.
*/
/* Receive multiplex framer header info */
@@ -72,27 +40,10 @@ struct type_frame_head {
} fr_h_i[MAX_RECV_FRAMES];
struct ks_net {
- struct net_device *netdev;
- union ks_tx_hdr txh;
struct type_frame_head *frame_head_info;
- u32 msg_enable;
- u32 frame_cnt;
int bus_width;
- int irq;
- u16 rc_txcr;
- u16 rc_ier;
u16 sharedbus;
- u16 cmd_reg_cache;
- u16 cmd_reg_cache_int;
- u16 promiscuous;
- u16 all_mcast;
- u16 mcast_lst_size;
- u8 mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN];
- u8 mcast_bits[HW_MCAST_SIZE];
- u8 mac_addr[6];
- u8 fid;
u8 extra_byte;
- u8 enabled;
} ks_str, *ks;
#define BE3 0x8000 /* Byte Enable 3 */
@@ -154,7 +105,7 @@ static inline void ks_outblk(struct eth_device *dev, u16 *wptr, u32 len)
static void ks_enable_int(struct eth_device *dev)
{
- ks_wrreg16(dev, KS_IER, ks->rc_ier);
+ ks_wrreg16(dev, KS_IER, IRQ_LCI | IRQ_TXI | IRQ_RXI);
}
static void ks_set_powermode(struct eth_device *dev, unsigned pwrmode)
@@ -288,12 +239,13 @@ static inline void ks_read_qmu(struct eth_device *dev, u16 *buf, u32 len)
static void ks_rcv(struct eth_device *dev, uchar **pv_data)
{
struct type_frame_head *frame_hdr = ks->frame_head_info;
+ unsigned int frame_cnt;
int i;
- ks->frame_cnt = ks_rdreg16(dev, KS_RXFCTR) >> 8;
+ frame_cnt = ks_rdreg16(dev, KS_RXFCTR) >> 8;
/* read all header information */
- for (i = 0; i < ks->frame_cnt; i++) {
+ for (i = 0; i < frame_cnt; i++) {
/* Checking Received packet status */
frame_hdr->sts = ks_rdreg16(dev, KS_RXFHSR);
/* Get packet len from hardware */
@@ -302,7 +254,7 @@ static void ks_rcv(struct eth_device *dev, uchar **pv_data)
}
frame_hdr = ks->frame_head_info;
- while (ks->frame_cnt--) {
+ while (frame_cnt--) {
if ((frame_hdr->sts & RXFSHR_RXFV) &&
(frame_hdr->len < RX_BUF_SIZE) &&
frame_hdr->len) {
@@ -392,13 +344,8 @@ static void ks_setup(struct eth_device *dev)
static void ks_setup_int(struct eth_device *dev)
{
- ks->rc_ier = 0x00;
-
/* Clear the interrupts status of the hardware. */
ks_wrreg16(dev, KS_ISR, 0xffff);
-
- /* Enables the interrupts of the hardware. */
- ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
}
static int ks8851_mll_detect_chip(struct eth_device *dev)
@@ -501,15 +448,16 @@ static int ks8851_mll_init(struct eth_device *dev, bd_t *bd)
static void ks_write_qmu(struct eth_device *dev, u8 *pdata, u16 len)
{
+ __le16 txw[2];
/* start header at txb[0] to align txw entries */
- ks->txh.txw[0] = 0;
- ks->txh.txw[1] = cpu_to_le16(len);
+ txw[0] = 0;
+ txw[1] = cpu_to_le16(len);
/* 1. set sudo-DMA mode */
ks_wrreg16(dev, KS_TXFDPR, TXFDPR_TXFPAI);
ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA);
/* 2. write status/lenth info */
- ks_outblk(dev, ks->txh.txw, 4);
+ ks_outblk(dev, txw, 4);
/* 3. write pkt data */
ks_outblk(dev, (u16 *)pdata, ALIGN(len, 4));
/* 4. reset sudo-DMA mode */
Most of the entries in the structure are useless, remove them. Inline the rest of uses where applicable. Signed-off-by: Marek Vasut <marex at denx.de> Cc: Eugen Hristev <eugen.hristev at microchip.com> Cc: Joe Hershberger <joe.hershberger at ni.com> --- drivers/net/ks8851_mll.c | 70 ++++++---------------------------------- 1 file changed, 9 insertions(+), 61 deletions(-)