diff mbox series

[v6,05/12] arm: mvebu: clearfog: Add option for 2.5 Gbps SFP

Message ID 20200323202140.309602-6-mrjoel@lixil.net
State Accepted
Commit 8a86308a87d32b289eff0b6f89de1dea466bae9b
Headers show
Series ClearFog Base static variant support | expand

Commit Message

Joel Johnson March 23, 2020, 8:21 p.m. UTC 
While newer Linux kernels provide autoconfiguration of SFP, provide
an option for setting in U-Boot Kconfig for use prior to booting.

Signed-off-by: Joel Johnson <mrjoel at lixil.net>
Reviewed-by: Stefan Roese <sr at denx.de>

---

v2 changes:
  - fixed help indentation
v3 changes:
  - none
v4 changes:
  - adjust static SerDes configuration at runtime instead of #ifdef
v5 changes:
  - make independent of runtime detection
v6 changes:
  - none

---
 board/solidrun/clearfog/Kconfig    | 7 +++++++
 board/solidrun/clearfog/clearfog.c | 5 +++++
 2 files changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig
index 936d5918f8..c910e17093 100644
--- a/board/solidrun/clearfog/Kconfig
+++ b/board/solidrun/clearfog/Kconfig
@@ -15,4 +15,11 @@  config TARGET_CLEARFOG_BASE
 	  detection via additional EEPROM hardware. This option enables selecting
 	  the Base variant for older hardware revisions.
 
+config CLEARFOG_SFP_25GB
+	bool "Enable 2.5 Gbps mode for SFP"
+	help
+	  Set the SFP module connection to support 2.5 Gbps transfer speed for the
+	  SGMII connection (requires a supporting SFP). By default, transfer speed
+	  of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module.
+
 endmenu
diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 11d3a7f877..8f3e5dc6a3 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -63,6 +63,11 @@  int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
 {
 	cf_read_tlv_data();
 
+	/* Apply build configuration options before runtime configuration */
+	if (IS_ENABLED(CONFIG_CLEARFOG_SFP_25GB))
+		board_serdes_map[5].serdes_speed = SERDES_SPEED_3_125_GBPS;
+
+	/* Apply runtime detection changes */
 	if (sr_product_is(&cf_tlv_data, "Clearfog GTR")) {
 		board_serdes_map[0].serdes_type = PEX0;
 		board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS;