Message ID | 20200317211946.28062-3-atish.patra@wdc.com |
---|---|
State | New |
Headers | show |
Series | DT related fixes for RISC-V UEFI | expand |
On 3/17/20 10:19 PM, Atish Patra wrote: > Currently, bootefi only parses memory reservation block to setup > EFI reserved memory mappings. However, it doesn't parse the > reserved-memory[1] device tree node that also can contain the > reserved memory regions. > > Add capability to parse reserved-memory node and update the EFI memory > mappings accordingly. > > 1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt] > > Signed-off-by: Atish Patra <atish.patra at wdc.com> > --- > cmd/bootefi.c | 44 +++++++++++++++++++++++++++++++++++--------- > 1 file changed, 35 insertions(+), 9 deletions(-) > > diff --git a/cmd/bootefi.c b/cmd/bootefi.c > index 24fc42ae898e..291cb2d69ff6 100644 > --- a/cmd/bootefi.c > +++ b/cmd/bootefi.c > @@ -149,6 +149,20 @@ done: > return ret; > } > > +static void efi_reserve_memory(uint64_t addr, uint64_t size) > +{ > + uint64_t pages; > + > + /* Convert from sandbox address space. */ > + addr = (uintptr_t)map_sysmem(addr, 0); > + pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); > + addr &= ~EFI_PAGE_MASK; > + if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, > + false) != EFI_SUCCESS) > + printf("Reserved memory mapping failed addr %llx size %llx\n", > + (unsigned long long)addr, (unsigned long long)size); > +} > + > /** > * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges > * > @@ -161,7 +175,8 @@ done: > static void efi_carve_out_dt_rsv(void *fdt) > { > int nr_rsv, i; > - uint64_t addr, size, pages; > + uint64_t addr, size; > + int nodeoffset, subnode; > > nr_rsv = fdt_num_mem_rsv(fdt); > > @@ -169,15 +184,26 @@ static void efi_carve_out_dt_rsv(void *fdt) > for (i = 0; i < nr_rsv; i++) { > if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) > continue; > + efi_reserve_memory(addr, size); > + } > > - /* Convert from sandbox address space. */ > - addr = (uintptr_t)map_sysmem(addr, 0); > - > - pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); > - addr &= ~EFI_PAGE_MASK; > - if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, > - false) != EFI_SUCCESS) > - printf("FDT memrsv map %d: Failed to add to map\n", i); > + /* process reserved-memory */ > + nodeoffset = fdt_subnode_offset(fdt, 0, "reserved-memory"); > + if (nodeoffset < 0) > + return; > + subnode = fdt_first_subnode(fdt, nodeoffset); > + while (subnode >= 0) { > + /* check if this subnode has a reg property */ > + addr = fdtdec_get_addr_size_auto_noparent(fdt, subnode, > + "reg", 0, > + (fdt_size_t *)&size, > + true); > + if (addr == FDT_ADDR_T_NONE) { > + debug("failed to read address/size\n"); > + continue; As you do not update subnode you never leave the loop, cf. https://lists.denx.de/pipermail/u-boot/2020-March/402891.html Best regards Heinrich > + } > + efi_reserve_memory(addr, size); > + subnode = fdt_next_subnode(fdt, subnode); > } > } > >
On 3/17/20 11:01 PM, Heinrich Schuchardt wrote: > On 3/17/20 10:19 PM, Atish Patra wrote: >> Currently, bootefi only parses memory reservation block to setup >> EFI reserved memory mappings. However, it doesn't parse the >> reserved-memory[1] device tree node that also can contain the >> reserved memory regions. >> >> Add capability to parse reserved-memory node and update the EFI memory >> mappings accordingly. >> >> 1. <U-Boot >> source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt] >> >> Signed-off-by: Atish Patra <atish.patra at wdc.com> >> --- >> ? cmd/bootefi.c | 44 +++++++++++++++++++++++++++++++++++--------- >> ? 1 file changed, 35 insertions(+), 9 deletions(-) >> >> diff --git a/cmd/bootefi.c b/cmd/bootefi.c >> index 24fc42ae898e..291cb2d69ff6 100644 >> --- a/cmd/bootefi.c >> +++ b/cmd/bootefi.c >> @@ -149,6 +149,20 @@ done: >> ????? return ret; >> ? } >> >> +static void efi_reserve_memory(uint64_t addr, uint64_t size) >> +{ >> +??? uint64_t pages; >> + >> +??? /* Convert from sandbox address space. */ >> +??? addr = (uintptr_t)map_sysmem(addr, 0); >> +??? pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); >> +??? addr &= ~EFI_PAGE_MASK; >> +??? if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, >> +?????????????????? false) != EFI_SUCCESS) >> +??????? printf("Reserved memory mapping failed addr %llx size %llx\n", >> +????????????? (unsigned long long)addr, (unsigned long long)size); >> +} >> + >> ? /** >> ?? * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges >> ?? * >> @@ -161,7 +175,8 @@ done: >> ? static void efi_carve_out_dt_rsv(void *fdt) >> ? { >> ????? int nr_rsv, i; >> -??? uint64_t addr, size, pages; >> +??? uint64_t addr, size; >> +??? int nodeoffset, subnode; >> >> ????? nr_rsv = fdt_num_mem_rsv(fdt); >> >> @@ -169,15 +184,26 @@ static void efi_carve_out_dt_rsv(void *fdt) >> ????? for (i = 0; i < nr_rsv; i++) { >> ????????? if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) >> ????????????? continue; >> +??????? efi_reserve_memory(addr, size); >> +??? } >> >> -??????? /* Convert from sandbox address space. */ >> -??????? addr = (uintptr_t)map_sysmem(addr, 0); >> - >> -??????? pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); >> -??????? addr &= ~EFI_PAGE_MASK; >> -??????? if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, >> -?????????????????????? false) != EFI_SUCCESS) >> -??????????? printf("FDT memrsv map %d: Failed to add to map\n", i); >> +??? /* process reserved-memory */ >> +??? nodeoffset = fdt_subnode_offset(fdt, 0, "reserved-memory"); >> +??? if (nodeoffset < 0) >> +??????? return; >> +??? subnode = fdt_first_subnode(fdt, nodeoffset); >> +??? while (subnode >= 0) { >> +??????? /* check if this subnode has a reg property */ >> +??????? addr = fdtdec_get_addr_size_auto_noparent(fdt, subnode, >> +????????????????????????????? "reg", 0, >> +????????????????????????????? (fdt_size_t *)&size, >> +????????????????????????????? true); >> +??????? if (addr == FDT_ADDR_T_NONE) { >> +??????????? debug("failed to read address/size\n"); >> +??????????? continue; > > As you do not update subnode you never leave the loop, cf. > https://lists.denx.de/pipermail/u-boot/2020-March/402891.html > > Best regards > > Heinrich Corrected and merged into origin/master. Best regards Heinrich > >> +??????? } >> +??????? efi_reserve_memory(addr, size); >> +??????? subnode = fdt_next_subnode(fdt, subnode); >> ????? } >> ? } >> >> >
On Tue, Mar 17, 2020 at 3:02 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote: > > On 3/17/20 10:19 PM, Atish Patra wrote: > > Currently, bootefi only parses memory reservation block to setup > > EFI reserved memory mappings. However, it doesn't parse the > > reserved-memory[1] device tree node that also can contain the > > reserved memory regions. > > > > Add capability to parse reserved-memory node and update the EFI memory > > mappings accordingly. > > > > 1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt] > > > > Signed-off-by: Atish Patra <atish.patra at wdc.com> > > --- > > cmd/bootefi.c | 44 +++++++++++++++++++++++++++++++++++--------- > > 1 file changed, 35 insertions(+), 9 deletions(-) > > > > diff --git a/cmd/bootefi.c b/cmd/bootefi.c > > index 24fc42ae898e..291cb2d69ff6 100644 > > --- a/cmd/bootefi.c > > +++ b/cmd/bootefi.c > > @@ -149,6 +149,20 @@ done: > > return ret; > > } > > > > +static void efi_reserve_memory(uint64_t addr, uint64_t size) > > +{ > > + uint64_t pages; > > + > > + /* Convert from sandbox address space. */ > > + addr = (uintptr_t)map_sysmem(addr, 0); > > + pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); > > + addr &= ~EFI_PAGE_MASK; > > + if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, > > + false) != EFI_SUCCESS) > > + printf("Reserved memory mapping failed addr %llx size %llx\n", > > + (unsigned long long)addr, (unsigned long long)size); > > +} > > + > > /** > > * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges > > * > > @@ -161,7 +175,8 @@ done: > > static void efi_carve_out_dt_rsv(void *fdt) > > { > > int nr_rsv, i; > > - uint64_t addr, size, pages; > > + uint64_t addr, size; > > + int nodeoffset, subnode; > > > > nr_rsv = fdt_num_mem_rsv(fdt); > > > > @@ -169,15 +184,26 @@ static void efi_carve_out_dt_rsv(void *fdt) > > for (i = 0; i < nr_rsv; i++) { > > if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) > > continue; > > + efi_reserve_memory(addr, size); > > + } > > > > - /* Convert from sandbox address space. */ > > - addr = (uintptr_t)map_sysmem(addr, 0); > > - > > - pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); > > - addr &= ~EFI_PAGE_MASK; > > - if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, > > - false) != EFI_SUCCESS) > > - printf("FDT memrsv map %d: Failed to add to map\n", i); > > + /* process reserved-memory */ > > + nodeoffset = fdt_subnode_offset(fdt, 0, "reserved-memory"); > > + if (nodeoffset < 0) > > + return; > > + subnode = fdt_first_subnode(fdt, nodeoffset); > > + while (subnode >= 0) { > > + /* check if this subnode has a reg property */ > > + addr = fdtdec_get_addr_size_auto_noparent(fdt, subnode, > > + "reg", 0, > > + (fdt_size_t *)&size, > > + true); > > + if (addr == FDT_ADDR_T_NONE) { > > + debug("failed to read address/size\n"); > > + continue; > > As you do not update subnode you never leave the loop, cf. > https://lists.denx.de/pipermail/u-boot/2020-March/402891.html > Thanks for the fix. I have verified your sandbox patches as well with bootefi hello and efidebug memmap as well. > Best regards > > Heinrich > > > + } > > + efi_reserve_memory(addr, size); > > + subnode = fdt_next_subnode(fdt, subnode); > > } > > } > > > > >
diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 24fc42ae898e..291cb2d69ff6 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -149,6 +149,20 @@ done: return ret; } +static void efi_reserve_memory(uint64_t addr, uint64_t size) +{ + uint64_t pages; + + /* Convert from sandbox address space. */ + addr = (uintptr_t)map_sysmem(addr, 0); + pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); + addr &= ~EFI_PAGE_MASK; + if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, + false) != EFI_SUCCESS) + printf("Reserved memory mapping failed addr %llx size %llx\n", + (unsigned long long)addr, (unsigned long long)size); +} + /** * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges * @@ -161,7 +175,8 @@ done: static void efi_carve_out_dt_rsv(void *fdt) { int nr_rsv, i; - uint64_t addr, size, pages; + uint64_t addr, size; + int nodeoffset, subnode; nr_rsv = fdt_num_mem_rsv(fdt); @@ -169,15 +184,26 @@ static void efi_carve_out_dt_rsv(void *fdt) for (i = 0; i < nr_rsv; i++) { if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) continue; + efi_reserve_memory(addr, size); + } - /* Convert from sandbox address space. */ - addr = (uintptr_t)map_sysmem(addr, 0); - - pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK)); - addr &= ~EFI_PAGE_MASK; - if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, - false) != EFI_SUCCESS) - printf("FDT memrsv map %d: Failed to add to map\n", i); + /* process reserved-memory */ + nodeoffset = fdt_subnode_offset(fdt, 0, "reserved-memory"); + if (nodeoffset < 0) + return; + subnode = fdt_first_subnode(fdt, nodeoffset); + while (subnode >= 0) { + /* check if this subnode has a reg property */ + addr = fdtdec_get_addr_size_auto_noparent(fdt, subnode, + "reg", 0, + (fdt_size_t *)&size, + true); + if (addr == FDT_ADDR_T_NONE) { + debug("failed to read address/size\n"); + continue; + } + efi_reserve_memory(addr, size); + subnode = fdt_next_subnode(fdt, subnode); } }
Currently, bootefi only parses memory reservation block to setup EFI reserved memory mappings. However, it doesn't parse the reserved-memory[1] device tree node that also can contain the reserved memory regions. Add capability to parse reserved-memory node and update the EFI memory mappings accordingly. 1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt] Signed-off-by: Atish Patra <atish.patra at wdc.com> --- cmd/bootefi.c | 44 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 9 deletions(-)