new file mode 100644
@@ -0,0 +1,445 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2020, Intel Corporation
+ */
+
+#ifndef __INTEL_SMC_H
+#define __INTEL_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+/*
+ * This file defines the Secure Monitor Call (SMC) message protocol used for
+ * service layer driver in normal world (EL1) to communicate with secure
+ * monitor software in Secure Monitor Exception Level 3 (EL3).
+ *
+ * This file is shared with secure firmware (FW) which is out of kernel tree.
+ *
+ * An ARM SMC instruction takes a function identifier and up to 6 64-bit
+ * register values as arguments, and can return up to 4 64-bit register
+ * value. The operation of the secure monitor is determined by the parameter
+ * values passed in through registers.
+
+ * EL1 and EL3 communicates pointer as physical address rather than the
+ * virtual address.
+ */
+
+/*
+ * Functions specified by ARM SMC Calling convention:
+ *
+ * FAST call executes atomic operations, returns when the requested operation
+ * has completed.
+ * STD call starts a operation which can be preempted by a non-secure
+ * interrupt. The call can return before the requested operation has
+ * completed.
+ *
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7.
+ */
+
+#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
+ ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+ ARM_SMCCC_OWNER_SIP, (func_num))
+
+/*
+ * Return values in INTEL_SIP_SMC_* call
+ *
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
+ * Secure monitor software doesn't recognize the request.
+ *
+ * INTEL_SIP_SMC_STATUS_OK:
+ * FPGA configuration completed successfully,
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software can accept the next chunk of FPGA configuration data.
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software is still processing previous data & can't accept the next chunk
+ * of data. Service driver needs to issue
+ * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
+ * completed block(s).
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ * There is error during the FPGA configuration process.
+ *
+ * INTEL_SIP_SMC_REG_ERROR:
+ * There is error during a read or write operation of the protected
+ * registers.
+ */
+#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+#define INTEL_SIP_SMC_STATUS_OK 0x0
+#define INTEL_SIP_SMC_STATUS_BUSY 0x1
+#define INTEL_SIP_SMC_STATUS_REJECTED 0x2
+#define INTEL_SIP_SMC_STATUS_ERROR 0x4
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_START
+ *
+ * Sync call used by service driver at EL1 to request the FPGA in EL3 to
+ * be prepare to receive a new configuration.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
+ * a1: flag for full or partial configuration
+ * 0 full reconfiguration.
+ * 1 partial reconfiguration.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
+#define INTEL_SIP_SMC_FPGA_CONFIG_START \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ *
+ * Async call used by service driver at EL1 to provide FPGA configuration data
+ * to secure world.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
+ * a1: 64bit physical address of the configuration data memory block
+ * a2: Size of configuration data block.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY,
+ * INTEL_SIP_SMC_STATUS_REJECTED or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block if any completed
+ * block, otherwise zero value.
+ * a2: 64bit physical address of 2nd completed memory block if any completed
+ * block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if any completed
+ * block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
+#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
+ INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
+ *
+ * Sync call used by service driver at EL1 to track the completed write
+ * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
+ * INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block.
+ * a2: 64bit physical address of 2nd completed memory block if
+ * any completed block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if
+ * any completed block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
+#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
+INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
+ *
+ * Sync call used by service driver at EL1 to inform secure world that all
+ * data are sent, to check whether or not the secure world had completed
+ * the FPGA configuration process.
+ * Set 1 in 2nd argument (a1) to query the status of the first phase FPGA
+ * configuration by sending MBOX_CONFIG_STATUS to SDM. Otherwise this sync
+ * call always query the status of 2nd phase FPGA reconfiguration by sending
+ * MBOX_RECONFIG_STATUS to SDM.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
+ * a1: set 1 to send MBOX_CONFIG_STATUS otherwise send MBOX_RECONFIG_STATUS
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
+ * INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
+#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
+ *
+ * Sync call used by service driver at EL1 to query the physical address of
+ * memory block reserved by secure monitor software.
+ *
+ * Call register usage:
+ * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: start of physical address of reserved memory block.
+ * a2: size of reserved memory block.
+ * a3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
+#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
+
+/*
+ * Request INTEL_SIP_SMC_REG_READ
+ *
+ * Read a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_READ.
+ * a1: register address.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: Value in the register
+ * a2-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_READ 7
+#define INTEL_SIP_SMC_REG_READ \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
+
+/*
+ * Request INTEL_SIP_SMC_REG_WRITE
+ *
+ * Write a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_WRITE.
+ * a1: register address
+ * a2: value to program into register.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
+#define INTEL_SIP_SMC_REG_WRITE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
+ *
+ * Update one or more bits in a protected register using a
+ * read-modify-write operation.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_UPDATE.
+ * a1: register address
+ * a2: Write Mask.
+ * a3: Value to write.
+ * a4-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: Not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
+#define INTEL_SIP_SMC_REG_UPDATE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_STATUS
+ *
+ * Sync call used by service driver at EL1 to query the RSU status
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_STATUS
+ * a1-7 not used
+ *
+ * Return status
+ * a0: Current Image
+ * a1: Last Failing Image
+ * a2: Version [width 32 bit] | State [width 32 bit]
+ * a3: Error details [width 32 bit] | Error location [width 32 bit]
+ *
+ * Or
+ *
+ * a0: INTEL_SIP_SMC_STATUS_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
+#define INTEL_SIP_SMC_RSU_STATUS \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_UPDATE
+ *
+ * Sync call used by service driver at EL1 to tell you next reboot is RSU_UPDATE
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_UPDATE
+ * a1 64bit physical address of the configuration data memory in flash
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
+#define INTEL_SIP_SMC_RSU_UPDATE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
+
+/*
+ * Request INTEL_SIP_SMC_ECC_DBE
+ *
+ * Sync call used by service driver at EL1 alert EL3 that a Double Bit
+ * ECC error has occurred.
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_ECC_DBE
+ * a1 SysManager Double Bit Error value
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
+#define INTEL_SIP_SMC_ECC_DBE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_NOTIFY
+ *
+ * Sync call used by service driver at EL1 to report HPS software execution
+ * stage
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_NOTIFY
+ * a1 32bit HPS software execution stage
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
+#define INTEL_SIP_SMC_RSU_NOTIFY \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ *
+ * Sync call used by service driver at EL1 to query the RSU retry counter
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1 retry counter
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
+#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
+
+/*
+ * Request INTEL_SIP_SMC_MBOX_SEND_CMD
+ *
+ * Send mailbox command to SDM
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_MBOX_SEND_CMD
+ * a1 Mailbox command
+ * a2 64bit physical address pointer to command's arguments
+ * a3 Length of the argument
+ * a4 Urgent command:
+ * 0 - Disable
+ * 1 - Enable
+ * a5 64bit physical address pointer to a buffer for receiving responses
+ * a6 Length of the buffer
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
+ * a1 Status of mailbox response
+ * a2 64bit physical address pointer to a buffer for receiving responses
+ * a3 Received length in the buffer
+ */
+#define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD 30
+#define INTEL_SIP_SMC_MBOX_SEND_CMD \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_BRIDGES
+ *
+ * Enable/disable the SoC FPGA bridges
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_BRIDGES
+ * a1 Set bridges status:
+ * 0 - Disable
+ * 1 - Enable
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES 60
+#define INTEL_SIP_SMC_HPS_SET_BRIDGES \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_PHYINTF
+ *
+ * Select EMACx PHY interface
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_PHYINTF
+ * a1 EMAC number:
+ * 0 - EMAC0
+ * 1 - EMAC1
+ * 2 - EMAC2
+ * a2 Type of PHY interface:
+ * 0 - GMII_MII
+ * 1 - RGMII
+ * 2 - RMII
+ * 3 - RESET
+ * a3-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_PHYINTF 61
+#define INTEL_SIP_SMC_HPS_SET_PHYINTF \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_PHYINTF)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK
+ *
+ * Select which phase shift of the clocks (drvsel & smplsel) for SDMMC
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK
+ * a1 Select which phase shift of the clock for cclk_in_drv (drvsel):
+ * 0 - 0 degree
+ * 1 - 45 degrees
+ * 2 - 90 degrees
+ * 3 - 135 degrees
+ * 4 - 180 degrees
+ * 5 - 225 degrees
+ * 6 - 270 degrees
+ * 7 - 315 degrees
+ * a2 Select which phase shift of the clock for cclk_in_sample (smplsel):
+ * (Same as above)
+ * a3-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_SDMMC_CCLK 62
+#define INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_SDMMC_CCLK)
+
+#endif